I cannot get cdrtfe to even work. Whenever I try to make a disc, and type of disc at all, it gets stuck. Right now I'm trying to make an data disc and it never passses the below in the log:
Commandline executed in the shell:
"/cygdrive/C/Program Files/cdrtfe/tools/cdrtools/mkisofs" -graft-points -joliet-long -disable-deep-relocation -volid CD -path-list "/cygdrive/C/Program Files/cdrtfe/pathlist.txt"|"/cygdrive/C/Program Files/cdrtfe/tools/cdrtools/cdrecord" gracetime=5 dev=0,1,0 driveropts=burnfree -v -dummy -force -dao -tsize=85704s -
"C:\Program Files\cdrtfe\tools\cygwin\sh" "/cygdrive/C/Program Files/cdrtfe/cmd.cdr"
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Does read CD-R media
Does write CD-R media
Does read CD-RW media
Does write CD-RW media
Does read DVD-ROM media
Does read DVD-R media
Does write DVD-R media
Does not read DVD-RAM media
Does not write DVD-RAM media
Does support test writing
Does read Mode 2 Form 1 blocks
Does read Mode 2 Form 2 blocks
Does read digital audio blocks
Does restart non-streamed digital audio reads accurately
Does support Buffer-Underrun-Free recording
Does read multi-session CDs
Does read fixed-packet CD media using Method 2
Does not read CD bar code
Does read R-W subcode information
Does not return R-W subcode de-interleaved and error-corrected
Does read raw P-W subcode data from lead in
Does return CD media catalog number
Does return CD ISRC information
Does support C2 error pointers
Does not deliver composite A/V data
Does play audio CDs
Number of volume control levels: 256
Does support individual volume control setting for each channel
Does support independent mute setting for each channel
Does not support digital output on port 1
Does not support digital output on port 2
Loading mechanism type: tray
Does support ejection of CD via START/STOP command
Does not lock media on power up via prevent jumper
Does allow media to be locked in the drive via PREVENT/ALLOW command
Is not currently in a media-locked state
Does not support changing side of disk
Does not have load-empty-slot-in-changer feature
Does not support Individual Disk Present feature
Maximum read speed: 8467 kB/s (CD 48x, DVD 6x, BD 1x)
Current read speedWrite Performance:
START LBA: 0
End LBA: 442367
Start Perf: 5540 == 4x DVD
END Perf: 5540 == 4x DVD
START LBA: 442368
End LBA: 4173824
Start Perf: 8310 == 6x DVD
END Perf: 8310 == 6x DVD
Read Performance:
START LBA: 0
End LBA: 0
Start Perf: 0 == 0x DVD
END Perf: 0 == 0x DVD
End LBA: 4173824
Read Speed: 11080 == 8x DVD
Write Speed: 8310 == 6x DVD
End LBA: 4173824
Read Speed: 6925 == 5x DVD
Write Speed: 5540 == 4x DVD
8467 kB/s (CD 48x, DVD 6x, BD 1x)
Maximum write speed: 8467 kB/s (CD 48x, DVD 6x, BD 1x)
Current write speed: 8467 kB/s (CD 48x, DVD 6x, BD 1x)
Rotational control selected: CLV/PCAV
Buffer size in KB: 2048
Copy management revision supported: 1
Number of supported write speeds: 6
Write speed # 0: 8467 kB/s CLV/PCAV (CD 48x, DVD 6x, BD 1x)
Write speed # 1: 7056 kB/s CLV/PCAV (CD 40x, DVD 5x, BD 1x)
Write speed # 2: 5645 kB/s CLV/PCAV (CD 32x, DVD 4x, BD 1x)
Write speed # 3: 4234 kB/s CLV/PCAV (CD 24x, DVD 3x, BD 0x)
Write speed # 4: 2822 kB/s CLV/PCAV (CD 16x, DVD 2x, BD 0x)
Write speed # 5: 1411 kB/s CLV/PCAV (CD 8x, DVD 1x, BD 0x)
Current performance according to MMC get performance:
Maximum performance according to MMC get performance:
Supported CD-RW media types according to MMC-4 feature 0x37:
Does write multi speed CD-RW media
Does write high speed CD-RW media
Does write ultra high speed CD-RW media
Does write ultra high speed+ CD-RW media
Which version do you use (installer or portable version)?
What is your operating system?
> Whenever I try to make a disc, and type of disc at all,
> it gets stuck. Right now I'm trying to make an data disc
> and it never passses the below in the log:
So, what exactly happens? Nothing? Do you get any error messages? Or does the program (cdrtfe or one of the tools) crash?
Do you get this error with every project cdrtfe offers? At least the device scan seems to work. How about writing an Audio CD or a disc image or blanking CD-RWs?
If possible, start cdrtfe in debug mode (from the commandline: cdrtfe /debug) and post the complete log (or send it via eMail).
Your second post sounds as if a previous version of cdrtfe was working correctly. If so, which is the last working version? Or, if a working version suddenly started making problems, what has changed regarding your system?
Regards,
Oliver Valencia
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I have recently downloaded cdrtfe-1[1].3.2.exe from net.
I have Genuine Windows Vista(R) Home Basic 32 bit SP1 on PC.
When I am trying to burn some video files then I am getting errors and not able to burn them.
The error I am getting is :-
"C:\Program Files\cdrtfe\tools\cdrtools\cdrecord"
gracetime=5 dev=0,1,0 speed=4 driveropts=burnfree -dao
cuefile=/cygdrive/C/Rupesh/data/x.cue
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Cdrecord-ProDVD-ProBD-Clone 2.01.01a48 (i686-pc-cygwin)
Copyright (C) 1995-2008 Jörg Schilling
Using libscg version 'schily-0.9'.
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TSSTcorp'
Identifikation : 'CD-RW TS-H292C'
Revision : 'DE00'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
/Program Files/cdrtfe/tools/cdrtools/cdrecord: No such
file or directory. Cannot
open '/cygdrive/C/Rupesh/data/x.cue'.
Execution completed.
If anybody knows the solution of this please let me know. Contact me at rupeshkp728@gmail.com.
Regards,
Rupesh KP
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I cannot get cdrtfe to even work. Whenever I try to make a disc, and type of disc at all, it gets stuck. Right now I'm trying to make an data disc and it never passses the below in the log:
Commandline executed in the shell:
"/cygdrive/C/Program Files/cdrtfe/tools/cdrtools/mkisofs" -graft-points -joliet-long -disable-deep-relocation -volid CD -path-list "/cygdrive/C/Program Files/cdrtfe/pathlist.txt"|"/cygdrive/C/Program Files/cdrtfe/tools/cdrtools/cdrecord" gracetime=5 dev=0,1,0 driveropts=burnfree -v -dummy -force -dao -tsize=85704s -
"C:\Program Files\cdrtfe\tools\cygwin\sh" "/cygdrive/C/Program Files/cdrtfe/cmd.cdr"
I am getting the same problem ( mentioned in my previous reply ) in XP too.
Any help would be greatly appreciated. I love cdrtfe and would like to continue using it.
I forgot this is my previous post. My cdrtfe info is:
version 1.3.1
"C:\Program Files\cdrtfe\tools\cdrtools\cdrecord" dev=SPTI:0,1,0 -prcap -v
scsidev: 'SPTI:0,1,0'
devname: 'SPTI'
scsibus: 0 target: 1 lun: 0
SCSI buffer size: 64512
Cdrecord-ProDVD-ProBD-Clone 2.01.01a38 (i686-pc-cygwin) Copyright (C) 1995-2008 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.9'.
atapi: -1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-3550A '
Revision : '1.05'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Drive capabilities, per MMC-3 page 2A:
Does read CD-R media
Does write CD-R media
Does read CD-RW media
Does write CD-RW media
Does read DVD-ROM media
Does read DVD-R media
Does write DVD-R media
Does not read DVD-RAM media
Does not write DVD-RAM media
Does support test writing
Does read Mode 2 Form 1 blocks
Does read Mode 2 Form 2 blocks
Does read digital audio blocks
Does restart non-streamed digital audio reads accurately
Does support Buffer-Underrun-Free recording
Does read multi-session CDs
Does read fixed-packet CD media using Method 2
Does not read CD bar code
Does read R-W subcode information
Does not return R-W subcode de-interleaved and error-corrected
Does read raw P-W subcode data from lead in
Does return CD media catalog number
Does return CD ISRC information
Does support C2 error pointers
Does not deliver composite A/V data
Does play audio CDs
Number of volume control levels: 256
Does support individual volume control setting for each channel
Does support independent mute setting for each channel
Does not support digital output on port 1
Does not support digital output on port 2
Loading mechanism type: tray
Does support ejection of CD via START/STOP command
Does not lock media on power up via prevent jumper
Does allow media to be locked in the drive via PREVENT/ALLOW command
Is not currently in a media-locked state
Does not support changing side of disk
Does not have load-empty-slot-in-changer feature
Does not support Individual Disk Present feature
Maximum read speed: 8467 kB/s (CD 48x, DVD 6x, BD 1x)
Current read speedWrite Performance:
START LBA: 0
End LBA: 442367
Start Perf: 5540 == 4x DVD
END Perf: 5540 == 4x DVD
START LBA: 442368
End LBA: 4173824
Start Perf: 8310 == 6x DVD
END Perf: 8310 == 6x DVD
Read Performance:
START LBA: 0
End LBA: 0
Start Perf: 0 == 0x DVD
END Perf: 0 == 0x DVD
End LBA: 4173824
Read Speed: 11080 == 8x DVD
Write Speed: 8310 == 6x DVD
8467 kB/s (CD 48x, DVD 6x, BD 1x)
Maximum write speed: 8467 kB/s (CD 48x, DVD 6x, BD 1x)
Current write speed: 8467 kB/s (CD 48x, DVD 6x, BD 1x)
Rotational control selected: CLV/PCAV
Buffer size in KB: 2048
Copy management revision supported: 1
Number of supported write speeds: 6
Write speed # 0: 8467 kB/s CLV/PCAV (CD 48x, DVD 6x, BD 1x)
Write speed # 1: 7056 kB/s CLV/PCAV (CD 40x, DVD 5x, BD 1x)
Write speed # 2: 5645 kB/s CLV/PCAV (CD 32x, DVD 4x, BD 1x)
Write speed # 3: 4234 kB/s CLV/PCAV (CD 24x, DVD 3x, BD 0x)
Write speed # 4: 2822 kB/s CLV/PCAV (CD 16x, DVD 2x, BD 0x)
Write speed # 5: 1411 kB/s CLV/PCAV (CD 8x, DVD 1x, BD 0x)
Current performance according to MMC get performance:
Maximum performance according to MMC get performance:
Supported CD-RW media types according to MMC-4 feature 0x37:
Does write multi speed CD-RW media
Does write high speed CD-RW media
Does write ultra high speed CD-RW media
Does write ultra high speed+ CD-RW media
Supported profiles according to MMC-4 feature list:
Current: DVD+R/DL
Profile: DVD+R/DL (current)
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-R/DL sequential recording
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Supported features according to MMC-4 feature list:
Feature: 'Profile List' (current) (persistent)
Feature: 'Core' (current) (persistent)
Feature: 'Morphing' (current) (persistent)
Feature: 'Removable Medium' (current) (persistent)
Feature: 'Write Protect'
Feature: 'Random Readable'
Feature: 'Multi Read'
Feature: 'CD Read'
Feature: 'DVD Read'
Feature: 'Random Writable'
Feature: 'Incremental Streaming Writable' (current)
Feature: 'Formattable'
Feature: 'Restricted Overwrite'
Feature: 'DVD+RW'
Feature: 'DVD+R'
Feature: 'Rigid Restricted Overwrite'
Feature: 'CD Track at Once'
Feature: 'CD Mastering'
Feature: 'DVD-R/-RW Write'
Feature: 'CD-RW Write'
Feature: 'DVD+R/DL Read' (current)
Feature: 'Power Management' (current) (persistent)
Feature: 'CD Audio analog play'
Feature: 'Time-out' (current) (persistent)
Feature: 'DVD-CSS'
Feature: 'Real Time Streaming' (current)
Feature: 'Logical Unit Serial Number' (current) (persistent) Serial: '616B551S211 '
Feature: 'Disk Control Blocks'
Feature: 'DVD CPRM'
Execution completed.
Have you tried the current version 1.3.2?
Which version do you use (installer or portable version)?
What is your operating system?
> Whenever I try to make a disc, and type of disc at all,
> it gets stuck. Right now I'm trying to make an data disc
> and it never passses the below in the log:
So, what exactly happens? Nothing? Do you get any error messages? Or does the program (cdrtfe or one of the tools) crash?
Do you get this error with every project cdrtfe offers? At least the device scan seems to work. How about writing an Audio CD or a disc image or blanking CD-RWs?
If possible, start cdrtfe in debug mode (from the commandline: cdrtfe /debug) and post the complete log (or send it via eMail).
Your second post sounds as if a previous version of cdrtfe was working correctly. If so, which is the last working version? Or, if a working version suddenly started making problems, what has changed regarding your system?
Regards,
Oliver Valencia
Hi,
I have recently downloaded cdrtfe-1[1].3.2.exe from net.
I have Genuine Windows Vista(R) Home Basic 32 bit SP1 on PC.
When I am trying to burn some video files then I am getting errors and not able to burn them.
The error I am getting is :-
"C:\Program Files\cdrtfe\tools\cdrtools\cdrecord"
gracetime=5 dev=0,1,0 speed=4 driveropts=burnfree -dao
cuefile=/cygdrive/C/Rupesh/data/x.cue
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Cdrecord-ProDVD-ProBD-Clone 2.01.01a48 (i686-pc-cygwin)
Copyright (C) 1995-2008 Jörg Schilling
Using libscg version 'schily-0.9'.
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TSSTcorp'
Identifikation : 'CD-RW TS-H292C'
Revision : 'DE00'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
/Program Files/cdrtfe/tools/cdrtools/cdrecord: No such
file or directory. Cannot
open '/cygdrive/C/Rupesh/data/x.cue'.
Execution completed.
If anybody knows the solution of this please let me know. Contact me at rupeshkp728@gmail.com.
Regards,
Rupesh KP