[Cdrdao-devel] ATAPI burn fails on 2.4 kernel - cannot retrieve drive capabilities

[<dw...@co...>]

So, using Fedora Core 1, kernel 2.4.22-2199

Using cdrdao 1.1.7, I can burn just fine to my cdrw drive using ide-scsi. Of
course, I've been running into the DMA problems when trying to burn videocds.
So, I thought I would give the packet interface a try.

Grabbed  cdrdao-1.1.9-1, and reloaded ide-scsi, ide-cd so that the drive was
now owned by ide-cd. Attempting to burn gives the following error:

A scanbus located my drive. So, let's attempt to burn:

/usr/bin/cdrdao write --device ATAPI:0,0,0 --speed 16 videocd.cue
Cdrdao version 1.1.9 - (C) Andreas Mueller <an...@da...>
  SCSI interface library - (C) Joerg Schilling
  Paranoia DAE library - (C) Monty

Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.

Using libscg version 'schily-0.8'

ATAPI:0,0,0: SAMSUNG CD-R/RW SW-216B    Rev: Q001
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000)

Burning entire 79 mins disc.
Starting write ERROR: Cannot retrieve drive capabilities mode page.
at speed 0...
Pausing 10 seconds - hit CTRL-C to abort.
Process can be aborted with QUIT signal (usually CTRL-\).
WARNING: No super user permission to setup real time scheduling.
ERROR: Cannot retrieve write parameters mode page.
ERROR: Cannot setup write parameters for session-at-once mode.
ERROR: Please try to use the 'generic-mmc-raw' driver.
ERROR: Writing failed.


Trying the generic-mmc-raw driver and trying as root fail w. the same error.

Any ideas (esp since ide-scsi, as I have said, does work)?

Thanks!

-- 
********************************
David William Botsch
dw...@co...
********************************