[Cdrdao-devel] CDRDAO 1.1.7 on WIN2000 do not write with HP7100e+

[Stefan Z. <ste...@gm...>]

I have got CDRDAO 1.1.7 on a Windows 2000 System with the external HP 
7100e + Writer. Even the drive is in the list "Drives Known to Work", I 
only can read the disk-info, or blank the disk, but I can't write (see 
Protokol below). Is someone out there who can solve my problem?
Stefan






[CDRDAO Disk Info]
Cdrdao version 1.1.7
ASPI: C:\WINNT\System32\WnAspi32.dll
2,1,0: HP CD-Writer+ 7100    Rev: 3.01
Using driver: Generic SCSI-3/MMC (raw writing) - Version 2.0 (options 
0x0040)
That data below may not reflect the real status of the inserted medium. 
Reload the medium in this case.
CD-RW: YES
Total Capacity: 79:57:74 (359849 blocks, 702/807 MB)
CD-R medium: Mitsubishi Chemical Corporation
Long Strategy Type, e.g. Cyanine
Recording Speed: n/a
CD empty: YES

[CDRDAO Write]
WARNING: During writing you should avoid to open the Windows Explorer 
and similar tools
WARNING: CDRDAO does not lock the recording device so that all access 
action from the Explorer will lead to a failure of the recording process.
Cdrdao version 1.1.7
ASPI: C:\WINNT\System32\WnAspi32.dll
2,1,0: HP CD-Writer+ 7100    Rev: 3.01
Using driver: Generic SCSI-3/MMC (raw writing) - Version 2.0 (options 
0x0040)
Starting write simulation at speed 2...
ERROR: Cannot setup disk-at-once writing for this drive.
ERROR: Simulation failed.
ERROR: Note that CDRDAO troubles are often related to the use of an 
inadequate driver...
ERROR: You may have a bad "Force Driver" in the "CD Writer/Reader" 
settings page.