Tzvetan Ivanov wrote:
>
> cdrdao-1.1.5 is working perfectly with 0x0 record flag - but
> i've got a problem with the cd-text-record flag (0x10) - if anyone had
> this problem solved please email me ... thanx in advance
>
> cdrdao simulate --remote 9 -v0 --device 0,6,0 --driver generic-mmc:0x10
> --buffers 10 /tmp/toc4d4qGD
> ?: Input/output error. : scsi sendcmd: no error
> CDB: 5D 00 00 00 00 00 00 00 58 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 26 00 00 80
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
> Sense flags: Blk 0 (not valid) error refers to data part, bit ptr 0 (not
> valid) field ptr 0
> cmd finished after 0.252s timeout 180s
> ERROR: Cannot send cue sheet.
> ERROR: Simulation failed.
Please try the CD-TEXT patch which is available from the 'patch' section
of http://sourceforge.net/projects/cdrdao/. Some drives do not accept
the standard CD-TEXT cue sheet format. The patch tries to send a couple
of cue sheet variants to avoid this problem.
Regards,
Andreas
--
Andreas Mueller Tel: +49 89 67808848
Ramsmeierstr. 1 Email: an...@da...
85579 Neubiberg, Germany
|
