I have a DLink-Router which is connected to my modem. Over network cable I want to connect my Targa with this router.
I setted up WLAN with DHCP but there no client can get an IP!
If I set a static IP I don't have internet connection.
How do I have to setup my Targa?
mobile phone -> Targa (Bitswitch with DHCP) -> DLink Router -> Modem -> WAN
Thanks alot!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Anonymous
-
2011-05-10
Now I got it to work!
But I have another problem:
I only get connection to the webinterface using the WLAN-IP. My normal LAN-network is in address range 192.168.1.100-200 and my WLAN-network is in address range 192.168.2.100-200.
So how can I get access from LAN to Webinterface?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I would suggest that your DLink-Router acts as the only DHCP server. Set up your Targa using a static IP address and enter the IP address of the DLink-Router in Standard gateway and DNS-Server 1.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Anonymous
-
2011-05-10
Now I figured out, that after I set WAN-Port to LAN/Bridged I don't get into Webaccess and SSH!
No my DLink don't acts as the only DHCP with my old TPLink-AP that worked perfectly…
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi!
I'm trying to get my Bitswitcher to work…
I have a DLink-Router which is connected to my modem. Over network cable I want to connect my Targa with this router.
I setted up WLAN with DHCP but there no client can get an IP!
If I set a static IP I don't have internet connection.
How do I have to setup my Targa?
mobile phone -> Targa (Bitswitch with DHCP) -> DLink Router -> Modem -> WAN
Thanks alot!
Now I got it to work!
But I have another problem:
I only get connection to the webinterface using the WLAN-IP. My normal LAN-network is in address range 192.168.1.100-200 and my WLAN-network is in address range 192.168.2.100-200.
So how can I get access from LAN to Webinterface?
I would suggest that your DLink-Router acts as the only DHCP server. Set up your Targa using a static IP address and enter the IP address of the DLink-Router in Standard gateway and DNS-Server 1.
Now I figured out, that after I set WAN-Port to LAN/Bridged I don't get into Webaccess and SSH!
No my DLink don't acts as the only DHCP with my old TPLink-AP that worked perfectly…