Please help me to adjust the modem (targa wr 500 voip, firmware BS 0.3.3_TARGA_0.13).
For connection to my provider the following parametres are required
Encapsulation RFC2684B;
Multiplex LLC;
Obtain an IP Address Automatically;
ADSL mode G.dmt.
How to adjust these parametres in BS.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I could will be connected to the provider using other firmware (w500v_mod_0_1_061115) and following options:
<wan_0_33> <entry1 vccId = "1" conId = "1" name = "adsl_0_33" protocol = "MER" encap = "LLC" firewall = "disable" nat = "enable" igmp = "disable" service = "enable"/>
How in bitswitcher to adjust report MER (MAC INCAPSULATION ROUTING)?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Please help me to adjust the modem (targa wr 500 voip, firmware BS 0.3.3_TARGA_0.13).
For connection to my provider the following parametres are required
Encapsulation RFC2684B;
Multiplex LLC;
Obtain an IP Address Automatically;
ADSL mode G.dmt.
How to adjust these parametres in BS.
I could will be connected to the provider using other firmware (w500v_mod_0_1_061115) and following options:
<wan_0_33> <entry1 vccId = "1" conId = "1" name = "adsl_0_33" protocol = "MER" encap = "LLC" firewall = "disable" nat = "enable" igmp = "disable" service = "enable"/>
How in bitswitcher to adjust report MER (MAC INCAPSULATION ROUTING)?