Its no problem to use BitSwitcher with a "500V". You only have to turn WLAN=Off via Webinterface and then
reboot the device to avoid problems. All other functions are usable without any restrictions.
The only thing the mod500 guys did in their 500V-image is, to remove the WLAN modules from the and
to delete some cgi-skripts from the webinterface.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
first off - thanks for this great Firmware.
But it would be even more awesome if the "Speedport 500V" (without wireless) could be supportet as well.
Is this possible? Perhaps the guys from the Mod500 project could help.
Limer
Its no problem to use BitSwitcher with a "500V". You only have to turn WLAN=Off via Webinterface and then
reboot the device to avoid problems. All other functions are usable without any restrictions.
The only thing the mod500 guys did in their 500V-image is, to remove the WLAN modules from the and
to delete some cgi-skripts from the webinterface.