Re: [Bacula-users-es] Ayuda para configurar robot de cintas en bacula

[Jose A. <j....@gm...>]

Buenas tardes.

Nos puedes enviar la salida de tu:

lsscsi -g

saludos.

On Wed, Oct 19, 2016 at 9:25 AM, Hanzel Leonardo Martinez Rodriguez <
hlm...@us...> wrote:

> Buenos días, estimados
>
> Ante todo un cordial saludo. Les escribo en esta oportunidad para que por
> favor nos orienten en relación a la configuración de un robot de cintas en
> bacula.
>
> Antecedentes:
>
> Actualmente estamos realizando respaldos en disco, pero éste se encuentra
> lleno y obviamente no podemos seguir haciendo respaldos.
>
> Contamos con un robot de cintas con 4 drives y 66 slots y necesitamos
> ayuda para realizar la configuración. A continuación lo que tenemos
> configurado hasta el momento en el bacula-sd.conf y en el bacula-dir.conf
>
> *Bacula-sd.conf*
>
> Storage {                             # definition of myself
>   Name = sd
>   SDAddress = 192.168.10.2
>   SDPort = 9103
>   WorkingDirectory = "/var/bacula/working"
>   Pid Directory = "/var/run"
>   Maximum Concurrent Jobs = 20
> }
>
> #
> # List Directors who are permitted to contact Storage daemon
> #
> Director {
>   Name = dir
>   Password = "xxxx"
> }
>
> #
> # Restricted Director, used by tray-monitor to get the
> #   status of the storage daemon
> #
> Director {
>   Name = dirm
>   Password = "xxxx"
>   Monitor = yes
> }
>
> Device {
> Name = FileStorage
> Media Type = File
> Archive Device = /backup
> Random Access = yes
> AutomaticMount = yes
> RemovableMedia = no
> AlwaysOpen = no
> LabelMedia = yes
> Maximum Concurrent Jobs = 20
> }
>
> Device {
> Name = Drive-1
> Drive Index = 0
> Media Type = LTO-4
> Archive Device = /dev/nst0
> Maximum Concurrent Jobs = 20
> }
>
> #
> Device {
> Name = Drive-2
> Drive Index = 1
> Media Type = LTO-4
> Archive Device = /dev/nst1
> Maximum Concurrent Jobs = 20
> }
>
> Device {
> Name = Drive-3
> Drive Index = 2
> Media Type = LTO-4
> Archive Device = /dev/nst2
> }
>
> Device {
> Name = Drive-4
> Drive Index = 3
> Media Type = LTO-4
> Archive Device = /dev/nst3
> Maximum Concurrent Jobs = 20
> }
>
> #
> # An autochanger device with two drives
> #
> Autochanger {
>   Name = Autochanger
>   Device = Drive-1
>   Device = Drive-2
>   Device = Drive-3
>   Device = Drive-4
>   Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
>   Changer Device = /dev/sg11
> }
>
> #
> # Send all messages to the Director,
> # mount messages also are sent to the email address
> #
> Messages {
>   Name = Standard
>   director = dir = all
> }
>
> *Bacula-dir.conf*
>
> Storage {
>   Name = FileStorage
> # Do not use "localhost" here
>   Address = 159.90.200.216               # N.B. Use a fully qualified name
> here
>   SDPort = 9103
>   Password = "usuariososd"
>   Device = FileStorage
>   Media Type = File
> }
>
> *Desde la consola de bacula:*
> * st st
>
> *Me sale esto:*
>
> Device status:
> Autochanger "Autochanger" with devices:
>    "Drive-1" (/dev/nst0)
>    "Drive-2" (/dev/nst1)
>    "Drive-3" (/dev/nst2)
>    "Drive-4" (/dev/nst3)
> Device "FileStorage" (/backup) is not open.
> *Device "Drive-1" (/dev/nst0) open but no Bacula volume is currently
> mounted.*
>     Slot 2 is loaded in drive 0.
>     Total Bytes Read=0 Blocks Read=0 Bytes/block=0
>     Positioned at File=0 Block=0
> *Device "Drive-2" (/dev/nst1) open but no Bacula volume is currently
> mounted.*
>     Slot 3 is loaded in drive 1.
>     Total Bytes Read=0 Blocks Read=0 Bytes/block=0
>     Positioned at File=0 Block=0
> Device "Drive-3" (/dev/nst2) is mounted with:
>     Volume:      TestVolume2
>     Pool:        *unknown*
>     Media type:  LTO-4
>     Slot 4 is loaded in drive 2.
>     Total Bytes Read=0 Blocks Read=0 Bytes/block=0
>     Positioned at File=0 Block=0
> *Device "Drive-4" (/dev/nst3) open but no Bacula volume is currently
> mounted.*
>     Slot 5 is loaded in drive 3.
>     Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512
>     Positioned at File=0 Block=0
> ====
>
> Used Volume status:
> TestVolume2 on device "Drive-3" (/dev/nst2)
>     Reader=0 writers=0 devres=0 volinuse=0
> ====
>
>
> Version del director 5.2.5
>
> 1.- Opiniones sobre la configuraciòn
> 2.- Fíjense que en la salida del st st he subrayado algunas lineas, tengo
> 4 devices y una sola aparece montada y las demás no.
> 3.- Además me surge otra pregunta:
>
> Será posible hacer los respaldos en disco y luego lo que esta respaldado
> en el disco copiarlo o traspasarlo o respaldarlo en cinta?
>
>
> Gracias de antemano por sus comentarios.
>
> --
> T.S.U(E) Hanzel Martinez
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> Bacula-users-es mailing list
> Bac...@li...
> https://lists.sourceforge.net/lists/listinfo/bacula-users-es
>
>


-- 
#############################
#   Sistema Operativo: Debian      #
#        Caracas, Venezuela          #
#############################