Re: [Bacula-users] Bacula recognizes only 7 slots in an 8-slot-changer

[Dan L. <da...@la...>]

On 2012-06-26 07:12, Jens Grüntjes wrote:
> Zitat von Marco van Wieringen <mv...@pl...>:
>
>> Jens Grüntjes <jens.gruentjes <at> ebira.de> writes:
>>
>> Its something set in the changer.
>>
>> Check the tandberg web interface (guess the small 1u also has one)
>> my 24 slots has one at least.
>>
>> Go to the Configure/Cleaning menu and make sure Fixed Cleaning Slot 
>> Enabled:
>> is disabled and auto clean on is grayed out.
>>
>> You can also look at the front menu and do
>>
>> Maint
>> Cleaning Options
>> Fixed Cleaning Slot
>>
>> Should show something like Fixed Cleaning Slot x: Disabled.
>>
>> Marco
>
> Another post from me regarding the web interface. If I click on
> "Maintenance" -> "Debugging" -> "Event Log" I get this output. That
> looks as if there are 8 slots from the point of view of the changer
> itself or am I wrong here? But unfortunately the OS still recognizes
> only 7 slots

I would keep pursuing the firmware configuration aspect of this 
problem.

The library knows about 8 slots.  It sounds to me like the library 
needs to let the OS know...

-- 
Dan Langille - http://langille.org/