From: <mar...@up...> - 2012-01-31 19:49:11
|
In the message dated: Tue, 31 Jan 2012 17:14:24 -0200, The pithy ruminations from Isamar Maia on <[Bacula-users] Autochanger Problem: Second label is not being mounted> were: => Hi Folks, => => We are using a HP 1x8 G2 AutoLDR Autochanger with Bacula version 5.2.3 => => We're facing the following problem: => => 1) When I restart Bacula and run a Daily backup job, it automatically => mounts the first tape, labeled as "KDZ000L4"(tape1) => and it works perfectly well. => => 2) In the sequence, when it's necessary to load a second => tape(KDZ003L4), the tape is physically loaded into the drive but => Bacula stucks => with the following message: Was that tape already labeled? Was that tape used before? => => Device status: => Autochanger "HP_Autoloader" with devices: => "Fita" (/dev/nst0) => Device "FileStorage" (/tmp) is not open. => Device "Fita" (/dev/nst0) open but no Bacula volume is currently mounted. => Device is BLOCKED waiting for mount of volume "KDZ003L4", => Pool: Monthly => Media type: LTO-4 => Slot 8 is loaded in drive 0. => Total Bytes Read=1,032,192 Blocks Read=16 Bytes/block=64,512 => Positioned at File=0 Block=0 => ==== => Have you verified the label? stop bacula-sd load the tape (mtx) run "btape" with the storage device name from bacula-sd.conf for the Fita device run "readlabel" The problem sounds very similar to what I described previously. See the list archive for the subject "critical error -- tape labels get corrupted, previous backups unreadable": http://sourceforge.net/mailarchive/message.php?msg_id=28718589 Mark => => What should be the problem ? => => Isamar => => => -- => Isamar Maia => Cel. VIVO SSA: (55) 71-9146-8575 => Cel. TIM SSA: (55) 71-9185-5264 => Fixo: (55) 71-4062-8688 => $BF|K\(B: +81-(0)3-4550-1212 => Skype ID: isamar.maia => |