|
From: ml ml <mli...@go...> - 2010-12-28 13:08:04
|
Hello List,
i would like to back up multiple hosts into the following
File/Directory structure. Basically we would like to split the hosts
up into 3 groups.
Group1: Backup on USB Disk (/mnt/USB)
Group2: Backup on Raid6 (/mnt/RAID6)
Group3: Backup into mounted NFS share. /mnt/NFS)
First of all: i will need to define 3 Devices which have those paths
as "Archive Device", correct?:
Device {
Name = FileStorage-USB
Media Type = File
Archive Device = /mnt/USB
LabelMedia = yes;
Random Access = Yes;
AutomaticMount = yes;
RemovableMedia = no;
AlwaysOpen = no;
}
Device {
Name = FileStorage-RAID6
Media Type = File
Archive Device = /mnt/RAID6
LabelMedia = yes;
Random Access = Yes;
AutomaticMount = yes;
RemovableMedia = no;
AlwaysOpen = no;
}
Device {
Name = FileStorage-NFS
Media Type = File
Archive Device = /mnt/NFS
LabelMedia = yes;
Random Access = Yes;
AutomaticMount = yes;
RemovableMedia = no;
AlwaysOpen = no;
}
Pool {
Name = Default-Backup
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 365 days
Maximum Volume Bytes = 50G
Maximum Volumes = 20
}
One other requirement would be to use one volume per host. So that we
get the following directory and file structure:
-------------------------
/mnt/USB/Label-host1
/mnt/USB/Label-host2
/mnt/USB/Label-host3
/mnt/RAID6/Label-host4
/mnt/RAID6/Label-host5
/mnt/RAID6/Label-host6
/mnt/NFS/Label-host7
-------...etc...---------
But how can i assign a host/job to a volume/label?
Cheers,
Mario
|