From: Tomasz W. <to...@po...> - 2008-10-15 18:56:17
|
Hello, Thanks for answer, I have managed to set up copy tape to tape and it works. I have 2 questions: 1. After installing ver 2.5.12 it worked fine but once I have changed some config in bacula-dir.conf I coudn't start Director error I had was: 15-Oct 18:41 bacula-dir JobId 0: Fatal error: Could not open Catalog "MyCatalog", database "bacula". 15-Oct 18:41 bacula-dir JobId 0: Fatal error: Version error for database "bacula". Wanted 10, got 11 15-Oct 18:41 bacula-dir ERROR TERMINATION Please correct configuration file: /etc/bacula/bacula-dir.conf After this I had to restore my database from backup and then it worked fine. Is there needed to upgrade bacula database after installation? I've upgraded from 2.4.2 to 2.5.12. 2. I want to run ClientRunAfterJob after copy Job (script that cleans files from backuped folder) but is seems to omit that, what can be wrong? _____________________ My config is: _____________________ JobDefs { Name = "DefaultJob" Type = Backup Level = Incremental Client = serwer_bacula-fd FileSet = "serwer_baculaFS" Schedule = "WeeklyCycle" Messages = Standard Pool = VTS1ARCH Priority = 10 } FileSet { Name = "serwer_baculaFS" Include { Options { signature = MD5 } File = /tmp/test1/ } } Job { Name = "Serwer_backupu" JobDefs = "DefaultJob" Write Bootstrap = "/var/bacula/working/serwer_bacula.bsr" ClientRunBeforeJob = "/etc/bacula/move_archived_exports" RunAfterJob = "/etc/bacula/run_kopia_job" } Job { Name = "Serwer_backupukopia" Type = Copy Level = Full Client = serwer_bacula-fd FileSet = "Full Set" Messages = Standard Pool = VTS1ARCH Selection Type = SQLQuery Selection Pattern = "SELECT MAX(JobId) FROM Job WHERE Name='Serwer_backupu' AND JobStatus ='T';" ClientRunAfterJob = "/etc/bacula/delete_archived_exports" <- it's not running } ############################################################################ ############################################## I'll attach some log, it's a bit long , sorry... 16-Oct 00:14 serwer_bacula JobId 18115: Start Backup JobId 18115, Job=Serwer_backupu.2008-10-16_00.14.03 16-Oct 00:14 serwer_bacula JobId 18115: Using Device "Drive-2" 16-Oct 00:14 serwer_bacula-fd JobId 18115: shell command: run ClientRunBeforeJob "/etc/bacula/move_archived_exports" 16-Oct 00:14 serwer_bacula-sd JobId 18115: 3307 Issuing autochanger "unload slot 4012, drive 0" command. 16-Oct 00:14 serwer_bacula-sd JobId 18115: 3304 Issuing autochanger "load slot 4013, drive 0" command. 16-Oct 00:14 serwer_bacula-sd JobId 18115: 3305 Autochanger "load slot 4013, drive 0", status is OK. 16-Oct 00:14 serwer_bacula-sd JobId 18115: Wrote label to prelabeled Volume "Y04013" on device "Drive-2" (/dev/tape2) 16-Oct 00:14 serwer_bacula JobId 18115: Max Volume jobs exceeded. Marking Volume "Y04013" as Used. 16-Oct 00:14 serwer_bacula-sd JobId 18115: Job write elapsed time = 00:00:01, Transfer rate = 11.01 M bytes/second 16-Oct 00:14 serwer_bacula JobId 18115: Bacula serwer_bacula 2.5.12 (07Oct08): 16-Oct-2008 00:14:36 Build OS: s390x-ibm-linux-gnu suse 10 JobId: 18115 Job: Serwer_backupu.2008-10-16_00.14.03 Backup Level: Incremental, since=2008-10-16 00:07:48 Client: "serwer_bacula-fd" 2.5.12 (07Oct08) s390x-ibm-linux-gnu,suse,10 FileSet: "serwer_baculaFS" 2008-10-15 19:11:02 Pool: "VTS1ARCH" (From Job resource) Catalog: "MyCatalog" (From Client resource) Storage: "VTS-Robot" (From Pool resource) Scheduled time: 16-Oct-2008 00:14:04 Start time: 16-Oct-2008 00:14:08 End time: 16-Oct-2008 00:14:36 Elapsed time: 28 secs Priority: 10 FD Files Written: 2 SD Files Written: 2 FD Bytes Written: 11,013,921 (11.01 MB) SD Bytes Written: 11,014,095 (11.01 MB) Rate: 393.4 KB/s Software Compression: None VSS: no Encryption: no Accurate: no Volume name(s): Y04013 Volume Session Id: 1 Volume Session Time: 1224108791 Last Volume Bytes: 11,096,064 (11.09 MB) Non-fatal FD errors: 0 SD Errors: 0 FD termination status: OK SD termination status: OK Termination: Backup OK 16-Oct 00:14 serwer_bacula JobId 18115: Begin pruning Jobs. 16-Oct 00:14 serwer_bacula JobId 18115: No Jobs found to prune. 16-Oct 00:14 serwer_bacula JobId 18115: Begin pruning Files. 16-Oct 00:14 serwer_bacula JobId 18115: No Files found to prune. 16-Oct 00:14 serwer_bacula JobId 18115: End auto prune. 16-Oct 00:14 serwer_bacula JobId 18115: shell command: run AfterJob "/etc/bacula/run_kopia_job" 16-Oct 00:14 serwer_bacula JobId 18115: AfterJob: Connecting to Director 126.177.54.98:9101 16-Oct 00:14 serwer_bacula JobId 18115: AfterJob: 1000 OK: serwer_bacula Version: 2.5.12 (07 October 2008) 16-Oct 00:14 serwer_bacula JobId 18115: AfterJob: Enter a period to cancel a command. 16-Oct 00:14 serwer_bacula JobId 18115: AfterJob: @output /etc/bacula/bacula.out 16-Oct 00:14 serwer_bacula JobId 18116: The following 1 JobId was chosen to be copied: 18115 16-Oct 00:14 serwer_bacula JobId 18116: Copying using JobId=18115 Job=Serwer_backupu.2008-10-16_00.14.03 16-Oct 00:14 serwer_bacula JobId 18116: Bootstrap records written to /var/bacula/working/serwer_bacula.restore.1.bsr 16-Oct 00:14 serwer_bacula JobId 18116: Start Copying JobId 18116, Job=Serwer_backupukopia.2008-10-16_00.14.05 16-Oct 00:14 serwer_bacula JobId 18116: Using Device "Drive-4" 16-Oct 00:14 serwer_bacula-sd JobId 18116: Ready to read from volume "Y04013" on device "Drive-2" (/dev/tape2). 16-Oct 00:14 serwer_bacula-sd JobId 18116: 3307 Issuing autochanger "unload slot 4007, drive 0" command. 16-Oct 00:14 serwer_bacula-sd JobId 18116: 3304 Issuing autochanger "load slot 4008, drive 0" command. 16-Oct 00:21 serwer_bacula-sd JobId 18116: 3305 Autochanger "load slot 4008, drive 0", status is OK. 16-Oct 00:22 serwer_bacula-sd JobId 18116: Wrote label to prelabeled Volume "Y54008" on device "Drive-4" (/dev/tape4) 16-Oct 00:22 serwer_bacula JobId 18116: Max Volume jobs exceeded. Marking Volume "Y54008" as Used. 16-Oct 00:22 serwer_bacula-sd JobId 18116: Forward spacing Volume "Y04013" to file:block 1:1. 16-Oct 00:22 serwer_bacula-sd JobId 18116: End of file 2 on device "Drive-2" (/dev/tape2), Volume "Y04013" 16-Oct 00:22 serwer_bacula-sd JobId 18116: End of file 3 on device "Drive-2" (/dev/tape2), Volume "Y04013" 16-Oct 00:22 serwer_bacula-sd JobId 18116: End of Volume at file 3 on device "Drive-2" (/dev/tape2), Volume "Y04013" 16-Oct 00:22 serwer_bacula-sd JobId 18116: End of all volumes. 16-Oct 00:22 serwer_bacula JobId 18116: Bacula serwer_bacula 2.5.12 (07Oct08): 16-Oct-2008 00:22:02 Build OS: s390x-ibm-linux-gnu suse 10 Prev Backup JobId: 18115 New Backup JobId: 18117 Current JobId: 18116 Current Job: Serwer_backupukopia.2008-10-16_00.14.05 Backup Level: Full Client: serwer_bacula-fd FileSet: "Full Set" 2007-10-20 23:05:00 Read Pool: "VTS1ARCH" (From Job resource) Read Storage: "VTS-Robot" (From Pool resource) Write Pool: "VTS2ARCH" (From Job Pool's NextPool resource) Write Storage: "VTS-Robot2" (From Storage from Pool's NextPool resource) Catalog: "MyCatalog" (From Client resource) Start time: 16-Oct-2008 00:14:38 End time: 16-Oct-2008 00:22:02 Elapsed time: 7 mins 24 secs Priority: 10 SD Files Written: 2 SD Bytes Written: 11,014,095 (11.01 MB) Rate: 24.8 KB/s Volume name(s): Y54008 Volume Session Id: 2 Volume Session Time: 1224108791 Last Volume Bytes: 11,096,064 (11.09 MB) SD Errors: 0 SD termination status: OK Termination: Copying OK 16-Oct 00:22 serwer_bacula JobId 18116: Begin pruning Jobs. 16-Oct 00:22 serwer_bacula JobId 18116: No Jobs found to prune. 16-Oct 00:22 serwer_bacula JobId 18116: Begin pruning Files. 16-Oct 00:22 serwer_bacula JobId 18116: No Files found to prune. 16-Oct 00:22 serwer_bacula JobId 18116: End auto prune. Best regards, Tomasz -----Wiadomość oryginalna----- Od: Kern Sibbald [mailto:ke...@si...] Wysłano: 8 października 2008 15:32 Do: bac...@li... DW: to...@po... Temat: Re: [Bacula-devel] Bacula copy pools , volumes option On Wednesday 08 October 2008 09:01:41 to...@po... wrote: > Hello, > > I'd like to ask if it is planed to implement copy pools , volumes in > new version of bacula. It would be great functionality. I would be > able to make copies of backed-up data from tape to tape into few pools > without running the same job with different pool setting. > > I'm very interested in testing this solution if there is any beta > version we can test. Yes, this functionality exists in the current development version of Bacula. If you want to know about the new features, please see: http://www.bacula.org/manuals/en/concepts/concepts/New_Features.html Best regards, Kern > > Best regards, > > Tomasz > > ---------------------------------------------------------------------- > Dodaj strone www do katalogu. Pokaz ze istniejesz! > Sprawdz jak >> http://link.interia.pl/f1f2a > > > > ---------------------------------------------------------------------- > --- This SF.Net email is sponsored by the Moblin Your Move Developer's > challenge Build the coolest Linux based applications with Moblin SDK & > win great prizes Grand prize is a trip for two to an Open Source event > anywhere in the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > Bacula-devel mailing list > Bac...@li... > https://lists.sourceforge.net/lists/listinfo/bacula-devel ---------------------------------------------------------------------- Zobacz najlepsze oferty nieruchomosci! Sprawdz >>> http://link.interia.pl/f1f46 |