[Bacula-users] Backup after a restore gives an error

[Martijn de M. <ma...@yo...>]

Hi,

Always when I do a restore the next backup causes this error. I  
already added

tape-config-list=
"EXABYTE VXA-2", "Exabyte VXA-2", "VXA-2";
VXA-2 = 1,0x36,0,0x19e39,2,0x80,0x81,1;

to the Solaris 10 file /kernel/drv/st.conf to fix a problem when the  
end of tape is reached.

30-Sep 21:21 chet-dir JobId 584: Start Backup JobId 584,  
Job=Logs_Job_Chet.2008-09-30_21.21.03
30-Sep 21:21 chet-dir JobId 584: Using Device "Exabyte
VXA-2
Drive"
30-Sep 21:21 chet-sd JobId 584: 3307 Issuing autochanger "unload slot  
10, drive 0" command.
30-Sep 21:21 chet-sd JobId 584: 3304 Issuing autochanger "load slot 4,  
drive 0" command.
30-Sep 21:22 chet-sd JobId 584: 3305 Autochanger "load slot 4, drive  
0", status is OK.
30-Sep 21:22 chet-sd JobId 584: 3301 Issuing autochanger "loaded?  
drive 0" command.
30-Sep 21:22 chet-sd JobId 584: 3302 Autochanger "loaded? drive 0",  
result is Slot 4.
30-Sep 21:22 chet-sd JobId 584: Volume "A0000004" previously written,  
moving to end of data.
30-Sep 21:40 chet-sd JobId 584: Error: Unable to position to end of  
data on device "Exabyte VXA-2 Drive" (/dev/rmt/0cbn): ERR=dev.c:1326  
read error on "Exabyte VXA-2 Drive" (/dev/rmt/0cbn). ERR=I/O error.

30-Sep 21:40 chet-sd JobId 584: Marking Volume "A0000004" in Error in  
Catalog.
30-Sep 21:41 chet-dir JobId 584: Recycled volume "A0000005"
30-Sep 21:41 chet-sd JobId 584: 3307 Issuing autochanger "unload slot  
4, drive 0" command.
30-Sep 21:43 chet-sd JobId 584: 3304 Issuing autochanger "load slot 5,  
drive 0" command.
30-Sep 21:43 chet-sd JobId 584: 3305 Autochanger "load slot 5, drive  
0", status is OK.
30-Sep 21:43 chet-sd JobId 584: 3301 Issuing autochanger "loaded?  
drive 0" command.
30-Sep 21:43 chet-sd JobId 584: 3302 Autochanger "loaded? drive 0",  
result is Slot 5.
30-Sep 21:43 chet-sd JobId 584: Recycled volume "A0000005" on device  
"Exabyte VXA-2 Drive" (/dev/rmt/0cbn), all previous data lost.

Thanks,
Martijn