From: Maria M. <parody@u.washington.edu> - 2007-06-13 22:11:27
|
Broderick Wood wrote: > I see in another post you say that MTX is working properly from the command line. This makes me believe that LUN support is enabled. > > You should be getting communication problems with MTX if it wasn't. :-) > > BTW What Operating System and version are you running? > > I am running Debian, Linux version 2.4.27-3-386. In another post, I had explained how I got the permissions fixed (at least I think, they aren't the same as they use to be, but they are what someone else had reccommeded), but bacula was hanging. It did quit hanging, and turns out I had forgotten to restart the storage daemon. But there still seems to be a problem, as this is what I get now: *update slots Using default Catalog name=MyCatalog DB=bacula Automatically selected Storage: Exabyte Connecting to Storage daemon Exabyte at dinah:9103 ... 3306 Issuing autochanger "slots" command. Device "Exabyte" has 0 slots. No slots in changer to scan. Could this still be a permission problem? Here are my permissions now: crw-rw---- 1 root tape 9, 0 2005-02-25 22:38 /dev/st0 crw------- 1 root root 21, 0 2005-02-25 22:38 /dev/sg0 I assumed /dev/sg0 should have the same permissions as /dev/st0, so I added this to my script: KERNEL=="sg*", GROUP="tape", MODE="0660" but this didn't change the permissions for /dev/sg0. Is this likely to be the problem the changer didn't see any slots, and any idea why didn't changing the permissions work like it did for /dev/st0? thanks again, maria |