[Bacula-users] Autochanger problem

[Mike V. <mev...@co...>]

I just upgraded to 2.0.3.  I am having problems mounting the Autochanger. 
Here are my test results.

tapeinfo -f /dev/sg0 
Product Type: Medium Changer
Vendor ID: 'DELL    '
Product ID: 'PV-122T         '
Revision: 'D37r'
Attached Changer: No
SerialNumber: '3123B92743'
Invalid tapealert page: 0

mtx -f /dev/sg0 inquiry  
Product Type: Medium Changer
Vendor ID: 'DELL    '
Product ID: 'PV-122T         '
Revision: 'D37r'
Attached Changer: No

/btape /dev/nst0
Tape block granularity is 1024 bytes.
btape: butil.c:286 Using device: "/dev/nst0" for writing.
10-May 10:20 btape: 3301 Issuing autochanger "loaded? drive 0" command.
10-May 10:20 btape: 3991 Bad autochanger "loaded? drive 0" command: ERR=No
such file or directory.
Results=
## It just hangs here.

When I try to mount to take using the console here is what I get.

SD.conf file
Autochanger {
  Name = Autochanger
  Device = ToTape.0
  Changer Command = "/opt/bacula/bin/mtx-changer %c %o %S %a %d"
  ChangerDevice = /dev/sg0
}

Device {
  Name = ToTape.0                      #
  Drive Index = 0
  Media Type = LTO-1
  Archive Device = /dev/nst0
  AutomaticMount = yes;     
  AlwaysOpen = yes;
  RemovableMedia = yes;
  RandomAccess = no;
  AutoChanger = yes
  Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
}

DIR.conf File
Client {             
  Name = easy1	      
  Address = xxx.xxx.xxx.xxx
  FDPort = 9102       
  Catalog = MyCatalog
  Password = "password"          # password for FileDaemon
  File Retention = 14 days     # 14 days
  Job Retention = 6 months     # six months
  AutoPrune = yes              # Prune expired Jobs/Files
}

Job {
  Name = "easy1"
  JobDefs = "easy1"
  Write Bootstrap = "/etc/bacula/bootstrap/easy1.bsr"
  }
JobDefs { 
  Name = "easy1"
  Type = Backup
  Client = easy1
  FileSet = "easy1"
  Schedule = "DailyCycle"
  Storage = ToTape
  messages = Standard
  Pool = Default
  Priority = 5
}
*mount ToTape
Connecting to Storage daemon ToTape at nmc-sdca-mon1:9103 ...
Enter autochanger slot: 1
3301 Issuing autochanger "loaded? drive 0" command.
3991 Bad autochanger "loaded? drive 0" command: ERR=No such file or
directory.
Results=
3301 Issuing autochanger "loaded? drive 0" command.
3991 Bad autochanger "loaded? drive 0" command: ERR=No such file or
directory.
Results=
3304 Issuing autochanger "load slot 1, drive 0" command.
3992 Bad autochanger "load slot 1, drive 0": ERR=No such file or directory.
Results=
3301 Issuing autochanger "loaded? drive 0" command.
3991 Bad autochanger "loaded? drive 0" command: ERR=No such file or
directory.
Results=
3901 open device failed: ERR=dev.c:425 Unable to open device "ToTape.0"
(/dev/nst0): ERR=Input/output error

What could be wrong.  It was working before I upgraded.

Mike










-- 
View this message in context: http://www.nabble.com/Autochanger-problem-tf3723302.html#a10418784
Sent from the Bacula - Users mailing list archive at Nabble.com.