Menu
▾
▴
Re: [Bacula-users] HP-UX clients
|
From: Ryan N. <nov...@um...> - 2007-04-30 16:29:48
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Don't know, but I've never built anything older than 1.38.11 on HP-UX (you should have included the version number), and in addition I've never built on IA64, or on 11.23. If you include these things in your ticket (though I see I missed Itanium, but I'm not sure how much Itanium matters), we can all waste a lot less time. That said, why are you using 1.36.3? I would not recommend it, especially not with 2.2 due out soon. 1.36 to 1.38 is a painless upgrade, and the same goes for 2.0. No sense in making extra work for yourself. =R Mike Vasquez wrote: > OK, It seems as the I had no errors when I did the configure but errors in > the make. Here is what I did and the results > #CFLAGS="-g -Wall" \ > ./configure \ > --sbindir=/opt/bacula/bin \ > --sysconfdir=/opt/bacula \ > --with-pid-dir=/opt/bacula/bin/working \ > --with-subsys-dir=/opt/bacula/bin/working \ > --enable-smartalloc \ > --enable-client-only \ > --with-working-dir=/opt/bacula/bin/working \ > --with-dump-email=myemail@address\ > --with-job-email=myemail@address\ > --with-smtp-host=localhost > > In the config.log file I noticed the following, > configure:7214: gcc -E conftest.c > In file included from conftest.c:37: > /opt/hp-gcc-4.1.2/lib/gcc/ia64-hp-hpux11.23/4.1.2/include/varargs.h:4:2: > error: #error "GCC no longer implements <varargs.h>." > /opt/hp-gcc-4.1.2/lib/gcc/ia64-hp-hpux11.23/4.1.2/include/varargs.h:5:2: > error: #error "Revise your code to use <stdarg.h>." > configure:7220: $? = 1 > configure: failed program was: > | /* confdefs.h. */ > > > When I did make, I received the following errors > # make > ==>Entering directory /opt/bacula/bacula-1.36.3/src > ==>Entering directory /opt/bacula/bacula-1.36.3/scripts > ==>Entering directory /opt/bacula/bacula-1.36.3/doc > ==>Entering directory /opt/bacula/bacula-1.36.3/src/lib > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 alloc.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 attr.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 base64.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 berrno.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bsys.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bget_msg.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bnet.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bnet_server.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bpipe.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bshm.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 btime.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 cram-md5.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 crc32.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 daemon.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 edit.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 fnmatch.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 hmac.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 idcache.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 jcr.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 lex.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 alist.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 dlist.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 md5.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 message.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 mem_pool.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 parse_conf.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 queue.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 rwlock.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 scan.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 serial.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 sha1.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 semlock.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 signal.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 smartall.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 tree.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 util.c > util.c: In function 'void make_session_key(char*, char*, int)': > util.c:473: error: 'getdomainname' was not declared in this scope > *** Error exit code 1 > > Stop. > > > -e ====== Error in /opt/bacula/bacula-1.36.3/src/lib ====== > > > ==>Entering directory /opt/bacula/bacula-1.36.3/src/findlib > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 find.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 match.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 find_one.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 attribs.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 create_file.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bfile.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 enable_priv.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 fstype.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 makepath.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 save-cwd.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 winapi.c > /usr/bin/rm -f libfind.a > /usr/bin/ar cr libfind.a find.o match.o find_one.o attribs.o > create_file.o bfile.o enable_priv.o fstype.o makepath.o save-cwd.o winapi.o > ranlib libfind.a > Make: Don't know how to make ../lib/libbac.a. Stop. > > > -e ====== Error in /opt/bacula/bacula-1.36.3/src/findlib ====== > > > ==>Entering directory /opt/bacula/bacula-1.36.3/src/filed > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 filed.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 authenticate.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 backup.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 estimate.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 filed_conf.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 heartbeat.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 job.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 restore.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 status.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 verify.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 verify_vol.c > Make: Don't know how to make ../lib/libbac.a. Stop. > > > -e ====== Error in /opt/bacula/bacula-1.36.3/src/filed ====== > > > ==>Entering directory /opt/bacula/bacula-1.36.3/src/console > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 console.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 console_conf.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 authenticate.c > g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 conio.c > Make: Don't know how to make ../lib/libbac.a. Stop. > > > -e ====== Error in /opt/bacula/bacula-1.36.3/src/console ====== > > > ==>Entering directory /opt/bacula/bacula-1.36.3/rescue > ==>Entering directory /opt/bacula/bacula-1.36.3/rescue/linux > > Any ideas? Could something be wrong with the Flag in ./configure? Wrong > version of gcc? It seems that it is looking for libbac.a. I searched for > this file and it was not present. Where would I get this file? > > TIA > > Mike > > Ryan Novosielski wrote: > Sounds right to me... like I said, I did nothing special, but > --with-client-only (or --enable-client-only, read the configure help as > I don't remember the flag name) is surely what I did since I did not > build a director on that machine. > > Should work fine -- post errors if you get them, as it's hard to predict > with no info. > > =R > > Mike Vasquez wrote: >>>> Hi. >>>> >>>> It would be nice to know the procedures you used to compile HP-UX. I am >>>> in >>>> the same situation. I have installed gcc with success. Now, do I get >>>> the >>>> src and do a ./configure --with client-only? I am a newbie with bacula >>>> and >>>> HP. >>>> >>>> TIA >>>> Mike >>>> >>>> >>>> Ryan Novosielski wrote: >>>>> Just built it myself on Friday. I believe I used gcc, mainly because >>>>> some >>>>> is in c++, and for some reason I didn't have HP's installed. >>>>> >>>>> Builds just fine -- no compile errors. >>>>> >>>>> -----Original Message----- >>>>> >>>>> From: Xeos Laenor <xeo...@gm...> >>>>> Subj: [Bacula-users] HP-UX clients >>>>> Date: Mon Mar 5, 2007 5:45 am >>>>> Size: 326 bytes >>>>> To: bacula-users <bac...@li...> >>>>> >>>>> I use bacula with success on a RhEL4 Server and i need integrate a HP-UX >>>>> client in order to backup it. >>>>> Does a binary client exist for HP-UX (v11 for itanium)? >>>>> if not, have you some advises for compiling bacula-client on HP-UX (from >>>>> your own experience)? >>>>> >>>>> Thanks a lot >>>>> >>>>> Franck >>>>> --- message truncated --- >>>>> >>>>> >>>>> ------------------------------------------------------------------------- >>>>> Take Surveys. Earn Cash. Influence the Future of IT >>>>> Join SourceForge.net's Techsay panel and you'll get the chance to share >>>>> your >>>>> opinions on IT & business topics through brief surveys-and earn cash >>>>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV >>>>> _______________________________________________ >>>>> Bacula-users mailing list >>>>> Bac...@li... >>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users >>>>> >>>>> >> >> - ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Bacula-users mailing list Bac...@li... https://lists.sourceforge.net/lists/listinfo/bacula-users >> >> - -- ---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Systems Programmer III |$&| |__| | | |__/ | \| _| |nov...@um... - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/AST - NJMS Medical Science Bldg - C630 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGNhlTmb+gadEcsb4RAqaZAKC96E2HfdxHiEJAK6IsLCffioLCBACeNagZ K2I6hrNM8L19xqZrkCMDe2U= =Skkr -----END PGP SIGNATURE----- |