Re: [Bacula-users] debug available on bacula-fd?

[Arno L. <al...@it...>]

Hi,

On 1/22/2007 8:48 PM, Jo Rhett wrote:
> Okay, I've got the weirdest authentication problem.  We've got dozens  
> of clients set up, and they all work.  But this one new linux system  
> keeps getting auth errors.  We have gotten two good backups, but the  
> followups always fail.  We've changed passwords, everything.
> 
> 1. No firewall between the hosts (dedicated backup network)
> 2. Telnet 9102 to the client or 9103 client to backup server works fine
> 
> Is there any debug I can enable on the filedaemon to figure out what  
> it thinks is wrong?  Nothing is being logged...

What I'd do in your situation is:
- shutdown the FD on the funny client
- start the FD manually like 'bacula-fd -c ... -f -d 1000 | tee 
./bacula-fd-1000.log'
- try to connect to the FD using bconsoles status comand
- watch the log lines scroll

But first check that the DIR has the correct address for the FD - 
perhaps the IP address has changed some time in between... 'show 
client=...' in bconsole is a good first step. Also, look up the 
documentation to the setip command - that one can cause you lots of fun :-)

Arno


-- 
IT-Service Lehmann                    al...@it...
Arno Lehmann                  http://www.its-lehmann.de