From: <ba...@pi...> - 2006-03-11 13:54:43
|
Bacula was working OK before my upgrade 1.36.3 -> 1.38.5. The problem is that when I "update slots scan", I have the following actions : (It even do not load each tape before telling that there is no volname.) *update slots scan Using default Catalog name=MyCatalog DB=bacula The defined Storage resources are: 1: File 2: Sony Select Storage resource (1-2): 2 Connecting to Storage daemon Sony at orval:9103 ... 3306 Issuing autochanger "slots" command. Device "SonyDrive" has 8 slots. Connecting to Storage daemon Sony at orval:9103 ... 3301 Issuing autochanger "loaded drive 0" command. 3302 Autochanger "loaded drive 0", result is Slot 1. 3307 Issuing autochanger "unload slot 1, drive 0" command. 3306 Issuing autochanger "list" command. Connecting to Storage daemon Sony at orval:9103 ... 3301 Issuing autochanger "loaded drive 0" command. 3302 Autochanger "loaded drive 0", result: nothing loaded. No VolName for Slot=1 InChanger set to zero. Connecting to Storage daemon Sony at orval:9103 ... 3301 Issuing autochanger "loaded drive 0" command. 3302 Autochanger "loaded drive 0", result: nothing loaded. No VolName for Slot=2 InChanger set to zero. Connecting to Storage daemon Sony at orval:9103 ... 3301 Issuing autochanger "loaded drive 0" command. 3302 Autochanger "loaded drive 0", result: nothing loaded. No VolName for Slot=3 InChanger set to zero. Connecting to Storage daemon Sony at orval:9103 ... 3301 Issuing autochanger "loaded drive 0" command. 3302 Autochanger "loaded drive 0", result: nothing loaded. No VolName for Slot=4 InChanger set to zero. Connecting to Storage daemon Sony at orval:9103 ... 3301 Issuing autochanger "loaded drive 0" command. 3302 Autochanger "loaded drive 0", result: nothing loaded. No VolName for Slot=5 InChanger set to zero. Connecting to Storage daemon Sony at orval:9103 ... 3301 Issuing autochanger "loaded drive 0" command. 3302 Autochanger "loaded drive 0", result: nothing loaded. No VolName for Slot=6 InChanger set to zero. Connecting to Storage daemon Sony at orval:9103 ... 3301 Issuing autochanger "loaded drive 0" command. 3302 Autochanger "loaded drive 0", result: nothing loaded. No VolName for Slot=7 InChanger set to zero. Connecting to Storage daemon Sony at orval:9103 ... 3301 Issuing autochanger "loaded drive 0" command. 3302 Autochanger "loaded drive 0", result: nothing loaded. No VolName for Slot=8 InChanger set to zero. I don't understand why I have the : 3306 Issuing autochanger "list" command. line, because I have no barcode, and the list command will return nothing. orval bacula # mtx -f /dev/sg1 status Storage Changer /dev/sg1:1 Drives, 8 Slots ( 0 Import/Export ) Data Transfer Element 0:Empty Storage Element 1:Full Storage Element 2:Full Storage Element 3:Full Storage Element 4:Full Storage Element 5:Full Storage Element 6:Full Storage Element 7:Full Storage Element 8:Full orval bacula # ./mtx-changer /dev/sg1 list 1: 2: 3: 4: 5: 6: 7: 8: orval bacula # I'm a bit lost, I don't know why is my bacula not changing tapes correctly. Perhap's did you already met this problem ? Regards, |