[Bacula-users] Dell PowerVault 136T

[Roger S. <rsk...@at...>]

Hi,


I have now Bacula running using a Dell PowerVault 136T with 12 portals, 60
slots and two LTO2 drives. Bacula automatically picks the right tapes and
such... Everything is fully automated.

We backup approx 35GB of incremental data each day and full backup once a
month, 1.6TB of data.

Thanks for a great piece of software, by using Bacula we save a lot of time
and money.


Regards,
Roger Skjetlein,
Atmel Corporation



The storage system is 100% fibrechannel (although we do some backup to a
local raid5). Info regarding the running system below (truncated):

FreeBSD 5.2.1-RELEASE #5: Fri Aug 13 13:16:00 CEST 2004
rsk...@al...:/usr/src/sys/i386/compile/ALEXANDRIA
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0818000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc081826c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(TM) MP 1800+ (1533.40-MHz 686-class CPU)
   Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
   real memory  = 2684272640 (2559 MB)
avail memory = 2604249088 (2483 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
isp0: <Qlogic ISP 2100 PCI FC-AL Adapter> port 0xb400-0xb4ff mem
0xf9000000-0xf9000fff irq 20 at device 8.0 on pci0
nge0: <National Semiconductor Gigabit Ethernet> port 0xb000-0xb0ff mem
0xf8800000-0xf8800fff irq 21 at device 9.0 on pci0
nge0: Ethernet address: 00:04:e2:7c:57:47
miibus0: <MII bus> on nge0
nsgphy0: <DP83861 10/100/1000 media interface> on miibus0
nsgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
twe0: <3ware 7000 series Storage Controller. Driver version 1.50.00.000>
port 0xa800-0xa80f mem 0xf7000000-0xf77fffff,0xf7800000-0xf780000f irq 17 at
device 6.0 on pci2
twe0: 4 ports, Firmware FE7X 1.05.00.068, BIOS BE7X 1.08.00.048
twed0: <Unit 0, RAID5, Normal> on twe0
twed0: 718114MB (1470698112 sectors)
GEOM: create disk twed0 dp=0xc93b8b8c
sa0 at isp0 bus 0 target 131 lun 2
sa0: <IBM ULTRIUM-TD2 37RH> Removable Sequential Access SCSI-3 device
sa0: 100.000MB/s transfers
sa1 at isp0 bus 0 target 131 lun 3
sa1: <IBM ULTRIUM-TD2 37RH> Removable Sequential Access SCSI-3 device
sa1: 100.000MB/s transfers
pass0 at isp0 bus 0 target 131 lun 0
pass0: <DELL PV-136T-FC 4194> Fixed Storage Array SCSI-3 device
pass0: 100.000MB/s transfers, Tagged Queueing Enabled
pass4 at isp0 bus 0 target 132 lun 0
pass4: <DELL PV-136T-FC 4194> Fixed Storage Array SCSI-3 device
pass4: 100.000MB/s transfers, Tagged Queueing Enabled
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s1a
ch0 at isp0 bus 0 target 131 lun 1
ch0: <DELL PV-136T 3.11> Removable Changer SCSI-2 device
ch0: 100.000MB/s transfers
ch0: 60 slots, 2 drives, 1 picker, 12 portals