[Bacula-devel] Can't mount previously written DVD media

[Scott S. <Sco...@co...>]

bacula CVS 2006-09-17

I'm trying to write onto a previously written not full DVD media. However, the 
bacula-sd isn't recognizing it. When I mount it, I get


Device "DVDStorage" (/dev/hdc) is not open.
    Device is BLOCKED waiting for media.
Configured device capabilities:
EOF BSR BSF FSR FSF EOM REM RACCESS AUTOMOUNT LABEL !ANONVOLS !ALWAYSOPEN
Device state:
!OPENED !TAPE !LABEL !MALLOC !APPEND !READ !EOT !WEOT !EOF !NEXTVOL !SHORT 
MOUNTED
num_writers=0 block=2

Device parameters:
Archive name: /dev/hdc Device name: DVDStorage
File=0 block=0
Min block=0 Max block=0


from the bconsole bacula-sd status message. I turned on -d400 on bacula-sd and 
this gives


r2d2-sd: dircmd.c:165 Start Dir Job
r2d2-sd: cram-md5.c:58 send: auth cram-md5 <1942043471.1158727318@r2d2-sd> 
ssl=0
r2d2-sd: cram-md5.c:118 cram-get: auth cram-md5 <49934042.1158727318@r2d2-dir> 
ssl=0
r2d2-sd: cram-md5.c:137 sending resp to challenge: b6MUuE/L+6k44l/hB/lq7C
r2d2-sd: dircmd.c:186 Message channel init completed.
r2d2-sd: dircmd.c:193 <dird: mount DVDStorage drive=-1
r2d2-sd: dircmd.c:207 Do command: mount
r2d2-sd: dircmd.c:537 Found device DVDStorage
r2d2-sd: dircmd.c:577 Found device DVDStorage
r2d2-sd: dircmd.c:609 mount cmd blocked=2
r2d2-sd: dircmd.c:613 Waiting for mount. Attempting to wake thread
r2d2-sd: wait.c:91 Wokeup from sleep on device stat=0 blocked=BST_MOUNT
r2d2-sd: wait.c:171 set BST_DOING_ACQUIRE
r2d2-sd: wait.c:173 Exit blocked=BST_DOING_ACQUIRE
r2d2-sd: askdir.c:467 Back from wait_for_sysop stat=4
r2d2-sd: askdir.c:489 Someone woke me for device "DVDStorage" (/dev/hdc)
r2d2-sd: askdir.c:232 dir_find_next_appendable_volume
r2d2-sd: askdir.c:245 >dird: CatReq Job=system-skywalker.2006-09-19_21.40.42 
FindMedia=1 pool_name=Default media_type=DVD
r2d2-sd: pythonlib.c:224