From: Philip M. <in...@bi...> - 2016-03-03 13:24:00
|
OK, I will try this later, one thing I did check, avarice builds without "hidapi.h" being on my system, but this is required for the demo program you pointed me to. My build of avarice went like this: > $ ./Bootstrap > + aclocal > + autoheader > + autoconf > + '[' -d config-aux ']' > + mkdir config-aux > + automake -a -c > configure.ac:35: installing 'config-aux/compile' > configure.ac:38: installing 'config-aux/config.guess' > configure.ac:38: installing 'config-aux/config.sub' > configure.ac:31: installing 'config-aux/install-sh' > configure.ac:31: installing 'config-aux/missing' > src/Makefile.am: installing 'config-aux/depcomp' > + rm -f config.cache > ./configure > blah...blah.... > make > blah...blah.... > exe file was ready The hidlib compiles under windows using VC++, which I do not have, so it will take me a little bit longer to build this. For what it's worth, the XplainedMini appears in Microsofts USB Device Viewer utility, and when I installed the filter for libUsb for the relevant endpoints of the XplainedMini, they also showed up in "install-filter-win.exe" Br, Philip On 03.03.2016 14:05, Joerg Wunsch wrote: > As Philip Mulrane wrote: > >> When I try avarice I just get this: >>> D:\Dropbox\avarice>avarice -d -4 -w -P m168p :4242 >>> AVaRICE version 2.13svn20160229, Mar 3 2016 11:51:04 >> And back to the prompt, without any further messages. > Well, AVaRICE has to be built using Cygwin on Windows, so > maybe there's an issue with Cygwin and libhidapi then? > > If you go to the libhidapi home page: > > http://www.signal11.us/oss/hidapi/ > > there's a short example program. Drop the second part > (starting at "handle = hid_open(..."), the initial part > will tell you all HIDs the library could find. Build that > example under Cygwin, and run it. > > The Atmel-ICE (or XplainedMini) must appear there. -- Bittrace14 UG Immanuel-Kant Str.59b 31812 Bad Pyrmont Fax: +49 32223945096 HRB 209338 Amtsger. Hannover Geschäftsführer Pauline Atkinson |