Monitoring hardware:
1 x Windows 7 x64 laptop PC
2 x Perle IOLAN DS1 (configured for serial tunneling over TCP/IP)
1 x RS485 to USB converter
Monitoring software:
Aurora Monitor 1.07 for Windows
Problems:
These inverters are the new types that PowerOne sells. It seems that the program is not reading all of the registers, and comes up with errors. I am referring to Inverter A and B 10s data, inverter information, etc. The app returns "No response from inverter" with the latter.
As mentioned in a previous post, the inverter information windows cannot be closed, and only shows the 1st inverter's data.
I hope I can contribute in making this application ever better. If any more information is needed please let me know.
Regards,
Johan
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Good day. I am new here, and I just wanted to say well done on a great app!
My setup:
2 x Aurora Uno 2.5-I-OUTD and 24 x Phono Solar Poly panels.
Poutput.org live website url: http://pvoutput.org/intraday.jsp?id=23876&sid=21753
Monitoring hardware:
1 x Windows 7 x64 laptop PC
2 x Perle IOLAN DS1 (configured for serial tunneling over TCP/IP)
1 x RS485 to USB converter
Monitoring software:
Aurora Monitor 1.07 for Windows
Problems:
These inverters are the new types that PowerOne sells. It seems that the program is not reading all of the registers, and comes up with errors. I am referring to Inverter A and B 10s data, inverter information, etc. The app returns "No response from inverter" with the latter.
As mentioned in a previous post, the inverter information windows cannot be closed, and only shows the 1st inverter's data.
I hope I can contribute in making this application ever better. If any more information is needed please let me know.
Regards,
Johan