[Astlinux-users] PC Engines APU Platform

[Armin T. <arm...@tu...>]

Hello Astlinux-users,

  I've  installed  the  alix  image  on the new APU.1C with a mSATA 16GB flash disk.
  The system  is  starting,  but  for vararius reason it doesn't boot.  I'm
  getting the following output:-

  >ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  >ata1.00: qc timeout (cmd 0xec)
  >ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
  >ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  >ata1.00: qc timeout (cmd 0xec)
  >ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
  >ata1: limiting SATA link speed to 1.5 Gbps
  >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  >ata1.00: qc timeout (cmd 0xec)
  >ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
  >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  >RAMDISK: gzip image found at block 0
  >VFS: Mounted root (ext2 filesystem) on device 1:0.
  >Freeing unused kernel memory: 452k freed
  >Runnix version 'runnix-0.4-6112' starting...
  >Runnix: AstLinux medium not found.
  >Dropping to shell, type 'exit' to reboot

  Any hint on how to resolve the issue

  Regards,
  Armin.