Menu
▾
▴
Re: [Astlinux-users] new installation from Mac OSX Lion
|
From: Fernando F. <dig...@gm...> - 2011-12-20 18:19:51
|
Lonnie, How can I change my persistent setup to another one? Right now is set to /dev/sda and I have a new hdd. I did: initial-setup format separate /dev/hda 60000 initial-setup configure /dev/hda Drive /dev/hda does not require configuration. initial-setup status ok-unionfs /dev/sda Any ideas? Thank You, Fernando Fuentes DIGITALVOIPNET.COM On Mon, Oct 31, 2011 at 10:47 AM, Lonnie Abelbeck <li...@lo... > wrote: > Hi Shamus, > > We need to understand what is going on in more detail. The RUNNIX changes > from 0.7.7 to 0.7.8 is very minor and should not effect booting at all, and > both are using the same version of syslinux to perform the initial boot. I > don't think it is RUNNIX. > > Are you using a video or serial console? What is exact text where it > hangs (with some context), that is very helpful. > > What is the Jetway model number of your board and any specific info. > > Yes, the VIA C7 image has R8169 drivers, but are not enabled in > /etc/rc.modules by default as you stated. > > > 1) Now that you have an extra CF card laying around :-), next try the > 1.0-beta beta images, but use the "Generic i586" (or Generic i586 Serial > Console) image, not the C7. Choose your favorite Asterisk version. > > Asterisk 1.4.42 > http://www.astlinux.org/release/10-svn-5224-asterisk-1442 > > Asterisk 1.8.7.1 > http://www.astlinux.org/release/10-svn-5224-asterisk-1871 > > Please report your results. > > > 2) Instead of installing the viac7 image of 0.7.10, you could install the > geni586 image of 0.7.10 which has the r8169 driver enabled by default. > > > 3) Finally, even with the NIC not enabled, you can still setup persistent > storage via the console while using the viac7 image. > -- > $ initial-setup status > ok-format /dev/hda > > $ initial-setup format combined /dev/hda (or for a separate partition: > format separate /dev/hda 128) > > $ reboot > > $ initial-setup configure /dev/hda > > $ reboot > -- > now you can edit the /etc/rc.modules file and enable r8169 . > > Lonnie > > > On Oct 31, 2011, at 9:02 AM, Shamus Rask wrote: > > > I was able to go and purchase a different 4GB CF card yesterday and > tried again--same result. This got me thinking that maybe my motherboard > was having some sort of other issue with the current release. I downloaded > AstLinux 0.7.7 (prior to current RUNNIX release) and tried again... this > time, success! I think the culprit is RUNNIX, but have no way to be certain > at this point. > > > > That being said, I've run into a new problem. My motherboard uses a > RealTek chip for the GigE ports (Jetway mini-ITX board based on VIA C7). > Using the VIA C7 image, the Ethernet ports are not initialized. Logging in > from the CLI, I see that R8169 is commented out in /etc/rc.modules, but > when I try to uncomment I get an error saying the file is read-only. > > > > Two questions: > > 1. Are the R8169 drivers included in the VIA C7 image? > > 2. If so, how do I got about modifying files so that the correct drivers > are modprobed? > > > > many thanks, > > Shamus > > > > > > >Shamus, > > > > > >Yes, the file structure looks good. The .Trashes and .Spotlight-V100 > files>/dirs cause no harm. > > > > > >Time to try a new CF card. > > > > > >Lonnie > > > > > > ------------------------------------------------------------------------------ > Get your Android app more play: Bring it to the BlackBerry PlayBook > in minutes. BlackBerry App World™ now supports Android™ Apps > for the BlackBerry® PlayBook™. Discover just how easy and simple > it is! http://p.sf.net/sfu/android-dev2dev > _______________________________________________ > Astlinux-users mailing list > Ast...@li... > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > pa...@kr.... > |
