From: Phil D. <ux...@sp...> - 2012-09-02 19:17:31
|
Thank you Thomas. and for your PS: I did a reply all and the mailing list included your sending address so apologies for a ML mis-configuration! -- Thanks, Phil ----- Original Message ----- > >that is on the sync master. Should that read: > >maxSMTPSessions:=1,192.168.1.101:25=2 > yes, if the master is 192.168.1.100 and the initial synchronization > is finished - if not the line is: > maxSMTPSessions:=1,192.168.1.101:25=1 > on the slave, the line should be: > maxSMTPSessions:=1,192.168.1.100:25=3 > the line contents after := > 1 - this should be sychronized, 0 - should not , -1 should never > (prevented by the code) : this is a general flag for all the peers > are follow > , > IP:PORT - the IP and PORT of the sync peer > = > 0 - no sync for this peer, > 1 - I'm a sync- master and possibly slave, the value must be > synchronized but is not in sync -> means, I have to send the changes > to the peer , > 2 - I'm a sync- master and possibly slave, the value must be > synchronized and is in sync, > 3 - I'm only the sync slave - I don't know anything more - I'll take > what I get from the peer, > 4 - a sync request was received by (me) a sync- master/slave (2) from > this peer - a config change is pending - if I'm a master to other > peers, I have to send the changes to them (set there flag to 1) - > after that, this peer flag is changed to 2 - this flag prevents sync > loops > after the next comma starting with IP:PORT, the next peer config can > follow > An similar description is in GUI (syncConfigFile) - AND the first > line in the sync topic is: > Read all positions in this section carefully (multiple times is > recommended!!!)! A wrong configuration sequence or wrong > configuration values can lead in to a destroyed ASSP configuration! > Thomas > ps.: and don't bother me on my privat email on sunday again - use the > list! > Von: Phil Daws <ux...@sp...> > An: Thomas Eckardt <Tho...@th...>, > Kopie: For Users of ASSP <ass...@li...> > Datum: 02.09.2012 13:46 > Betreff: Re: Antwort: [Assp-user] Configuration Sharing Help > Hello Thomas: > Sorry, I am a little confused. i have checked assp_sync.cfg and > picked one of the lines it reads: > maxSMTPSessions:=1,192.168.1.100:25=2,192.168.1.101:25=2 > that is on the sync master. Should that read: > maxSMTPSessions:=1,192.168.1.101:25=2 > ?? > -- > Thanks, Phil > ----- Original Message ----- > > >syncServer:=192.168.1.101:25 > > > > is only used for initial setup - after that assp uses the > > assp_sync.cfg > > file - check this file > > > > or set all sync config values to default - use the default > > assp_sync.cfg > > file - and start the sync configuration again. > > > > Thomas > > > > > > > > Von: Phil Daws <ux...@sp...> > > An: For Users of ASSP <ass...@li...>, > > Datum: 02.09.2012 11:25 > > Betreff: [Assp-user] Configuration Sharing Help > > > > > > > > Hello: > > > > I have enabled configuration sharing but seeing this in my logfile: > > > > Sep-02-12 10:13:49 [Worker_1] 192.168.1.100 syncCFG: error - got > > 'ASSPSYNCCONFIG' command from ip 192.168.1.100 - the request will > > be > > ignored - check your configuration > > > > On the Sync master I have: > > > > enableCFGShare:=1 > > isShareMaster:=1 > > isShareSlave:= > > syncServer:=192.168.1.101:25 > > syncTestMode:= > > syncConfigFile:=file:assp_sync.cfg > > > > and on the slave: > > > > enableCFGShare:=1 > > isShareMaster:= > > isShareSlave:=1 > > syncServer:=192.168.1.100:25 > > syncTestMode:= > > syncConfigFile:=file:assp_sync.cfg > > > > Why would the master be trying to set configuration to itself ? > > -- > > Thanks, Phil > > > > ------------------------------------------------------------------------------ > > Live Security Virtual Conference > > Exclusive live event will cover all the ways today's security and > > threat landscape has changed and how IT managers can respond. > > Discussions > > will include endpoint security, mobile security and the latest in > > malware > > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > > _______________________________________________ > > Assp-user mailing list > > Ass...@li... > > https://lists.sourceforge.net/lists/listinfo/assp-user > > > > > > > > > > DISCLAIMER: > > ******************************************************* > > This email and any files transmitted with it may be confidential, > > legally > > privileged and protected in law and are intended solely for the use > > of the > > > > individual to whom it is addressed. > > This email was multiple times scanned for viruses. There should be > > no > > known virus in this email! > > ******************************************************* > > > > > > > DISCLAIMER: > ******************************************************* > This email and any files transmitted with it may be confidential, > legally privileged and protected in law and are intended solely for > the use of the > individual to whom it is addressed. > This email was multiple times scanned for viruses. There should be no > known virus in this email! > ******************************************************* |