[Armadeus-commitlog] armadeus branch, master, updated. armadeus-7.0
Brought to you by:
sszy
Menu
▾
▴
[Armadeus-commitlog] armadeus branch, master, updated. armadeus-7.0
|
From: Julien B a. A. <ar...@us...> - 2018-08-01 16:40:06
|
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "armadeus".
The branch, master has been updated
via 1b98995d741a124ada5e0b33540ba2c7608649bd (commit)
from af1da9ff3fbab159a7f257876ac89b9d3cc40699 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 1b98995d741a124ada5e0b33540ba2c7608649bd
Author: Julien Boibessot <jul...@ar...>
Date: Wed Aug 1 18:26:55 2018 +0200
Update ChangeLog and /etc/armadeus-version for 7.0 release
-----------------------------------------------------------------------
Summary of changes:
ChangeLog | 497 +++++++++++++++++++++
.../rootfs/target_skeleton/etc/armadeus-version | 2 +-
2 files changed, 498 insertions(+), 1 deletion(-)
diff --git a/ChangeLog b/ChangeLog
index dbb4dfb7f..fbfd3e4af 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,4 +1,501 @@
+----
+
+Changes in release armadeus-7.0 (released on August the 1rst 2018)
+
+* Wiki dump available here: Wiki dump feature is broken :-(
+
+* Corrected Tickets/Bugs:
+ #159: APF28 CAN issue
+ #157: glib getaddrinfo() vulnerability
+ #156: 2.6.35 APF28 kernel built with gcc 4.8 doesn't boot
+ #147: Bad Load average calculation on APF51 2.6.38
+
+* Buildroot:
+ Changes summary:
+ - BR 2017.02 is the new default Buildroot version
+ - Added support of OPOS6UL & OPOS6UL_NANO SoM
+ - Dropped support for APF9328 SoM
+
+ All Changes:
+ - opos6ulnano-preempt-rt_defconfig: fixes it so that it can be sourced (make source)
+ - apf6xenomai_defconfig: fixes it so that it can be sourced (make source)
+ - apf27xenomai_defconfig: fixes it so that it can be sourced (make source)
+ - Fixes opos6ullegacy-4.1_defconfig for BR 2017.02
+ - Fixes opos6ullegacy-4.9_defconfig for BR 2017.02
+ - 2017.02/2018.02: changes S10mdev via a patch
+ - 2017.02.x: patches missing from previous commit
+ - 2017.02: linux: BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL
+ - 2017.02: linux: Add host-bison and host-flex dependencies
+ - replace apf51_defconfig with apf51mainline_defconfig and update apf51test_defconfig accordingly
+ - remove apf9328*_defconfig (do not build anymore)
+ - rename apf28mainline*_defconfig -> apf28*_defconfig
+ - rename apf28test_defconfig -> apf28legacytest_defconfig
+ - rename apf28_defconfig -> apf28legacy_defconfig
+ - replace apf27xenomai_defconfig with apf27xenomaimainline_defconfig
+ - remove apf27_webradio_defconfig (do not build anymore)
+ - rename /apf27preempt-rtmainline_defconfig -> apf27preempt-rt_defconfig
+ - Update apf27test_defconfig with mainline kernel
+ - 2017.02: update cleanup_buildroot.sh
+ - 2017.02/2018.02: bump stress-ng
+ - 2017.02.x: update cleanup_buildroot.sh
+ - 2018.02.x: update patches for 2018.02.3
+ - Remove apf27_defconfig (which do not build anymore) and replace it by apf27mainline_defconfig.
+ - backport patch from upstream to fix libtirp compiling
+ - leptonmodule: add patch to fix Makefile
+ - opos6ul: update defconfig
+ - opos6ul/opos6ul_nano: properly set NEON/VFP
+ - 2017.02: remove some files when bumping from 2017.02.5 to 2017.02.10
+ - 2017.02: bump to 2017.02.11
+ - opos6ulnano/genimage.cfg: do not populate failsafe partition with default rootfs as it may oversize it
+ - fix URL for -rc kernel
+ - 2017.02: rootfs: just disable ext4 64bit feature
+ - 2017.02/2018.02: forces unbuffer tool installation when expect package is selected
+ - 2017.02/2018.02: add abootimg package
+ - Add python-gobject package to OPOS6UL* configs desserving it
+ - Prepare patches to BR 2018.02
+ - 2017.02 Add rpi-bt-firmware package (mainline backport) and activate it by default on NANO configs
+ - opos6ul(nano): add tcpdump to all configs deserving it
+ - Bump modemmanager & libqmi & libmbim versions
+ - 2017.02+: also install ssh-copy-id helper script when selecting openssh
+ - 2017.02: add patch to fix iio linux-tools build with recent (4.14+) kernels (sent to BR mainline)
+ - apf6/opos6ul: activates LeptonModule package on platforms supporting it
+ - opos6ul(nano): add dbus-python to all configs deserving it
+ - opos6ul/apf6: add haveged entropy generator to configs deserving it.
+ - opos6ul: bump to commit e026b020579847d2088df445a1ec43f17b45f981
+ - apf6/opos6ul: add hwdata package (pci.ids/usb.ids) to all configs deserving it
+ - add timeout tool to default busybox defconfig
+ - apf28: bump mainline defconfig to kernel 4.9.65
+ - 2017.02: bring back to life patch 205 which modify busybox stty to handle RS-485 serial port custom options
+ - apf28: bump mainline configuration to Linux 4.9. Add dropbear and lrzsz while we are at it...
+ - opos6ul(nano): Add socat, dnsmasq & law gst1 plugin to configs needing them.
+ - opos6ullegacy-4.1_defconfig: add Lepton utilities
+ - opos6ul: legacy-4.1: add some video related packages (gstreamer+capture+v4l2loopback)
+ - genimage.cfg: do not populate failsafe partition with default rootfs as it may oversize it
+ - opos6ultest_defconfig: add some packages from non test configs
+ - opos6ul(nano): add python-requests & links to mainline defconfigs
+ - 2017.02: apf6: add a defconfig to generate a Xorg rootfs which mimics Dawn Small Linux distribution (WIP)
+ - 2017.02: bump imx-usb-loader version to have i.MX6ULL support
+ - apf6legacy*_defconfigs: add multipart and jpegenc plugins to gstreamer
+ - apf6legacy*_defconfigs: add gdkpixbufoverlay lugin to gstreamer (overlay of png images)
+ - apf6legacy*_defconfig: re-add VPU/IPU/GPU gstreamer plugins plus some H.26x software one
+ - package/freescale-imx: add i.MX6UL support
+ - add opos6ullegacy-4.1_defconfig (for OPOS6UL with Freescale/NXP 4.1 kernel)
+ - 2017.02: imx-test: add i.MX6UL support (compilation)
+ - 2017.02: add LeptonModule package
+ - apf6legacy-4.1_defconfig: add imx-test by default and activate BR glibc toolchain to be able to use Freescale kernel includes
+ - bump imx-test version to 5.4 (for 4.1 Freescale kernels)
+ - 2017.02: backport patches to fix dbus hang at startup
+ - Bump to Buildroot 2017.02.5
+ - uClibc: update config to 1.0.22
+ - uClibc-ng: enable UCLIBC_SUPPORT_AI_ADDRCONFIG
+ - apf6/opos6ul(nano)_deconfigs: add PPPd, as these boards support external 2G modems
+ - all defconfigs: portmap is dead, replace it with rpcbind
+ - opos6ul(nano): add SFTP server to all defconfigs (for remote file system access through SSH... eclipse needs it)
+ - bump stress-ng version
+ - add a defconfig for preempt-rt on opos6ul
+ - add rt-tests, cpuload and stress-ng packages to opos6ul(nano) defconfigs
+ - add a defconfig for using preempt-rt on opos6ulnano
+ - 2017.02+: opos6ulnano: fixes u-boot build
+ - 2017.02: fix libpng build
+ - 2017.02: fixes libnl build
+ - Bump to Buildroot 2017.02.3
+ - Bump to Buildroot 2017.02.2
+ - opos6ul: add opos6ultest_defconfig file
+ - drivers-helpers: add Config.in file
+ - 2016.08+: fixes fix to add ldd to target rootfs when using external toolchains
+ - Bump to Buildroot 2017.02.1
+ - apf9328: bump to U-Boot 2017.01
+ - apf28: bump to U-Boot 2017.01
+ - apf51: Bump to U-Boot 2017.01
+ - apf27: Bump to U-Boot 2017.01
+ - apf28mainline_defconfig: fix BR2_DL_DIR and enable ccache
+ - Bump to Buildroot 2017.02
+ - drivers-helpers: convert it to BR's generic-package
+ - configs: Use really old kernel headers on really old kernel
+ - Port Buildroot patches to 2017.02
+ - mke2img: if var name and increase journal size to 4MB
+ - Generate ext4 images with mkfs instead of genextfs
+ - rootfs overlay: rename /etc/init.d/S01fb to S01firstboot and make it a once run script. Add it resize of eMMC rootfs while we are at it.
+ - [ROOTFS] Fixes post_build.sh to generate correct /etc/machine for OPOS6ULNANO
+ - [ROOTFS] Fixes /etc/init.d/S11firstboot for usage on OPOS6ULNANO. Add it /etc/fw_env.config installation while we are at it...
+ - [ROOTFS] S30wifi: fixes error messages on 4.x+ kernels (WI_EN handled inside kernel and not externally). Speed up chip reset while we are at it.
+ - [ROOTFS] Rename /etc/init.d/S01firstboot to S11firstboot, as it need to be run after S10mdev
+ - [ROOTFS] opos6ul: Automatically mount HOME-DATA partition (mmcblk0p3) to /home
+ - [ROOTFS] Drop /etc/securetty
+ - [ROOTFS] Add a keymap for Swiss German. Thanks ChriStian !
+ - [ROOTFS] Add nicer invite for ash shells
+ - all configs using device tree: add device tree compiler to rootfs
+ - Add v4l2loopback driver to APF6 configs with hardware overlay & gstreamer support
+ - 2016.08+: add v4l2loopback package
+ - fixes 2016.08/cleanup_buildroot.sh due following recent cryptodev patches commit
+ - apf6legacy*: gst1: add compositor (software) and textoverlay (needs pango) plugins to legacy default configs
+ - apf6legacy*: add gst1 multifile plugin to allow generation of video streams from png images
+ - add apf6legacy-4.1_defconfig
+ - apf6legacy_defconfig and apf6mediacenter_defconfig update
+ - package/armadeus/drivers-helpers: rename TARGETS to PACKAGES
+ - package/cryptodev-linux: fix build with recent kernel
+ - 2016.08: fixes cmux package build
+ - 2016.08: add comments to 019-armadeus-add-cmux-package.patch
+ - 2016.08: add cmux package
+ - post_build.sh: little trick to speedup mdev start
+ - opos6ul: add python-dateutil to default config
+ - opos6ul: add brcmfmac43430-sdio.txt in rootfs overlay
+ - 2016.08: libpng: bump to version 1.6.27
+ - opos6ul: add Python3 and some useful modules to default rootfs
+ - 2016.08: lora-forwarder: add possibility to choose server IP at runtime
+ - 030-lmic-pi-add-package.patch -> 030-armadeus-lmic-pi-add-package.patch
+ - 2016.08+: Add lmic-pi package (LoRa node)
+ - 2016.08: add a simple LoRa gateway (packet forwarder)
+ - apf-config: bump to latest version and remove lua dependency
+ - opos6ul: fill in genimage.cfg to generate user data partition image
+ - (quite) all board defconfigs: add mdev for /dev handling to mimic 6.0 and older BSPs
+ - opos6ul: fixes /etc/machine infos
+ - Rename opos6ulfailsafe_defconfig to opos6ul_recovery_defconfig
+ - post_build.sh: remove unneeded brcm firmwares on OPOS6UL
+ - post_image_creation.sh: no need for boot.ext4 on OPOS6UL
+ - 2016.08: cleanup_buildroot.sh: add linux-firmware
+ - 2016.08: deactivate i2c-tools header patch
+ - opos6ul: add spidev-test & spi-tools package to default config
+ - 2016.08: i2c-tools: install devt headers to staging dir
+ - opos6ul: add JPEG support to fbv by default
+ - linux-firmware: version bump
+ - opos6ul: use bluez5
+ - Fixes some comments in opos6ul_recovery.py
+ - Add a config to generate opos6ul failsafe
+ - opos6ul: update legacy_defconfig to mimic vanilla one
+ - opos6ul: move default vanilla kernel to 4.7.3
+ - 2016.08: updates cleanup_buildroot.sh
+ - 2016.08: fixes patch 022
+ - 2016.08: libpng: bump to version 1.6.25
+ - 2016.08: fixes patch 022
+ - 2016.08: rename patch 022
+ - Add OPOS6ULNANO support
+ - Use BR 2016.08
+ - Use BR 2016.08-rc3
+ - Use BR 2016.08-rc2
+ - imx-usb-loader: fix hash
+ - can-utils: fix hash
+ - imx28-usb-downloader: add missing host dependency
+ - Use BR 2016.08-rc1
+ - Make fw_printenv command work on OPOS6UL
+ - uboot.mk: call qstrip instead of qstring
+ - add opos6ul support
+ - Add ssh to APF27 configs
+ - Check properly if BR2_TARGET_UBOOT_CUSTOM_HEADER_CONFIG_FILE_PATH is unset
+ - Use BR 2016.05
+ - opos6ul_legacy_defconfig: use BR skeleton and our overlay
+ - linux-headers-2.6.29.6: backport patch to fix uclibc compilation
+ - Set static /dev management for apf27 with old kernel
+ - Set BR2_LINUX_KERNEL_UIMAGE=y in defconfig files
+ - Remove now useless uclibc patch
+ - Update pss and pps51 defconfig files
+ - Update config files
+ - Remove BR2_UCLIBC_VERSION_STRING from defconfig files
+ - Update busybox config
+ - Drop Armadeus rootfs skeleton
+ - Create armadeus drivers symlink after extracting the kernel
+ - APF6: update defconfig files
+ - Remove UBOOT_ARMADEUS_SPECIFIC_PATCH_HOOK hook
+ - Fix U-Boot configuration in apf*_defconfig
+ - add opos6ullegacy-4.9_defconfig
+ - APF6: apf6_defconfig: update for BR 2016.02
+ - 2016.02: apf-config: Remove BR2_LARGEFILE dependency
+ - Create armadeus drivers symlink after patching the kernel
+ - 2016.02: xenomai: define XENOMAI_ADEOS_PATCH when needed
+ - Check properly if BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR is unset
+ - [BUSYBOX] 1.24: add modinfo tool to default config
+ - Remove trailing slash in <PKG>_SITE
+ - APF6: add capture demo to configs that might need it
+ - Add imxregs to most APF6 configs
+ - Preliminary work to move to BR 2016.02
+ - 2015.02: fixes fbgrab bug with RGB565 framebuffers by upgrading to 1.3 version
+ - APF6: most configs: add libv4l and libv4ltools packages
+ - Fixes post_build.sh to correctly generate /etc/machine on APF9328
+ - Add preliminary support for new APF6UL SOM
+ - APF6: all configs: add lrzsz package
+ - libevent: fix broken URL
+ - Add 3.14.mx6_legacy config file
+ - APF6: most configs: add rsync tool
+ - apf27: create symlink u-boot-with-spl.bin to support target upgrade from legacy U-Boot release
+ - fix busybox config file
+ - 2015.02: ncurses: fix build issue with gcc 5.x
+ - 2015.02: backport openssl security fix from BR mainline
+ - 2015.02: rm 183-openwrt-uclibc-add-kernel_long-declaration.patch
+ - popt: fix URL
+ - openssl: bump to version 1.0.2e
+ - busybox 1.23: add label and uuid support to mount
+ - busybox 1.23: add tasket tool to default config
+ - rootfs: apf6: add init script to ease usage of WiFi
+ - busybox: fixes build of rfkill applet on old kernels
+ - APF6: add bc tool in all configs that might need it (may be useful to evaluate computationnal power)
+ - fixes bc crashes with patch from mainline Buildroot
+ - APF28: all configs: add iperf3 and iperf (if not already here)
+ - APF6: board is able to act as a Wi-Fi Access Point so add hostapd package by default
+ - All APF: add busybox (1.23) rfkill
+ - APF6: all defconfigs: give a volume name (ROOTFS) to rootfs.ext4 image)
+
+* Linux:
+ Changes summary:
+ - Adding support of OPOS6UL(NANO) SoMs
+
+ OPOS6UL(NANO) changes:
+ - 4.9: opos6ulnano: share config with opos6ul
+ - opos6ul(nano): 4.17+: add TPM 2.0 SPI drivers (modules)
+ - 4.17: opos6ulnano: share config with opos6ul
+ - 4.17: fix UART5 on i.MX6ULL
+ - 4.17: opos6ul: add CAAM support (i.MX6UL only)
+ - opos6ul: add dual ethernet device trees
+ - opos6ulnano: bump to 4.17.4
+ - opos6ul: bump to 4.17.4
+ - 4.17/4.9.legacy: opos6uldev: add SGTL5000 support on JTAG header
+ - opos6ul: bump to 4.17.2
+ - 4.17: add OPOS6ULNano and OPOS6ULNanoDev device trees
+ - opos6ul: bump to 4.17.1
+ - 4.1: port patch 0700 from 3.14
+ - 4.17: remove renames from patch 0100
+ - opos6ul: bump to 4.17-rc5
+ - opos6ul: bump to 4.17-rc1
+ - opos6ulnano: dts: fix ethernet pin muxing (once again...)
+ - NANO: 4.9/4.14: add OOB SDIO interrupt support for Wi-Fi module
+ - opos6ulnano: fix patch 0804
+ - OPOS6ULNANO: 4.14+: set spidev max speed to 60MHz
+ - 4.14: opos6ul/opos6ulnano: add i.MX6ULL support
+ - 4.14: share same config between opos6ul and opos6ulnano
+ - 4.8 & 4.14: fixes kernel oops when loading spidev driver
+ - opos6ul: 4.14: bump to 4.14.18
+ - 4.14: rename patch 0801 to reflect content (add OPOS6ULNano to DT and not OPOS6UL)
+ - opos6ul: bump tp 4.14.17 (LTS)
+ - opos6ulnano: dts: fix ethernet pin muxing
+ - opos6ulnano: 4.9: add bluetooth most used profile drivers
+ - opos6ul(nano): 4.8+: add bridge network driver to be able to create bridged network ;-)
+ - opos6ul(nano): 4.8+: add some drivers for USB Qualcomm based LTE MODEMs
+ - opos6ul(nano): 4.8+: add some driver for USB modems
+ - opos6ul: 4.8+: add a fix to prevent modprobing/rmmoding brcmfmac driver hack to have working Wi-Fi.
+ - opos6ul: 4.8+: add RFCOMM & BNEP & HIDP to Bluetooth protocls (modules)
+ - 4.9+: re-introduce patch to have RS-485 support on i.MX28 SOM
+ - 4.1-leagacy: add support for OPOS6ULL (OPOS6UL with i.MX6ULL)
+ - opos6ul: Add spidev module to 4.1-legacy config
+ - opos6ul(nano): add PPP & SLIP support (module) to valuable defconfigs
+ - 4.9: add opos6ul support
+ - adding default-on trigger for opos6ul_dev led driver
+ - 4.8+: opos6uldev: add device tree definition for LQ043 LCD
+ - 4.8: opos6uldev: add CSI pins definitions to default board device tree
+ - 4.8: opos6ul: remove i.MX6 IPU drivers in i.MX6UL config
+ - 4.8: opos6ul: improves imx6ul-opos6uldev.dts (backlight+onewire)
+ - 4.8: opos6uldev: select CONFIG_CFG80211_WEXT
+ - 4.8: opos6uldev: add 1-wire (bitbanging) support on GPIO5_IO01 (RPi2 connector pin 40)
+ - 4.8: opos6ul: rename LCD's backlight to be more /sys/ coherent
+ - 4.8: opos6ul: makes LCD backlight drived by PWM instead of 2 state GPIO
+ - 4.8: add mcp7940x RTC driver (from 4.4)
+ - 4.8: add device tree support to si7020 (temp+humidity sensor)
+ - opos6ul: backport mainline patch to fix fb corruption
+ - opos6ul and opos6ul_recovery: bump to 4.8.10
+ - opos6ul and opos6ul_recovery: bump to 4.8.9
+ - opos6ul and opos6ul_recovery: bump to 4.8.6
+ - 4.8+: opos6ul: update dts files
+ - 4.7: opos6ul: dts: add adc support
+ - 4.8+: opos6ul: add some commonly available sensors drivers (ADS1015, MCP4725, HMC5843, BMP180)
+ - 4.8+: opos6ul: improve touchsreen on LW700
+ - opos6ul: bump to 4.8.4
+ - 4.7: opos6ul: update dts files
+ - opos6ul: add spidev driver as module
+ - opos6ul: 4.7: no need for JFFS2 in config
+ - 4.7: opos6ul: update default linux config (6lowpan, usb_serial, 1wire, cpu_freq)
+ - 4.7: opos6ul: makes SPI port of RPi connector spidev device
+ - opos6ul: bump to 4.7.4
+ - OPOS6UL: bump to 4.7-rc6 and remove 4.6
+
+ APF6 changes:
+ - 4.1: apf6: enable PCIe
+ - apf6: 3.19 & 4.0: add spidev support on APF6Dev
+ - 4.1-legacy: mxsfb: fixes native-mode OF display's property handling
+ - 4.1-legacy: fixes i.MX6UL PWM clocks declaration
+ - 4.1-legacy: add device tree for OPOS6UL(DEV)
+ - 4.1: apf6: add spidev driver & configuration (J5 connector of APF6Dev. SPI1/CS0). Add some tests tools in BR defconfig, while we are at it...
+ - apf6: 3.19: fix HDMI on i.MX6 SoCs without VPU
+ - apf6: add PPP & SLIP support (module) to valuable defconfigs
+ - fixes apf6legacy-4.1_defconfig build
+ - 4.10: port some patches to try out FPGA on APF6_SP
+ - 3.14.mx6_legacy: fix compilation
+ - 3.14.mx6_legacy: patches default imx_v7_defconfig to be more APF6 friendly
+ - 4.1.mx6_legacy: patches default imx_v7_defconfig to be more APF6 friendly
+ - 4.1.mx6_legacy: dts: fix sgtl5000 node
+ - *.mx6_legacy: dts: fix microSD CD gpio polarity
+ - 4.1.mx6_legacy: dts: fix ov564x_mipi compatible name
+ - 4.1.mx6_legacy: Make DVI monitors working
+ - 4.1.mx6_legacy: make LCD working
+ - 3.14.mx6_legacy: touchscreen: add 'invert-y' property support
+ - 3.14.mx6_legacy: minor fixes in device tree
+ - 3.10.mx6_legacy: fix compilation with gcc 5
+ - 3.10.mx6_legacy: add support for gcc 5
+ - APF6: 3.19+: fixes kernel Ooops when using v4l2-ctl
+ - APF6: 3.19: add autofocus support to OV5640 MIPI camera
+ - 4.4: apf6: dts: add missing phy-handle property
+ - patch 0447 useless (included in kernel 4.4)
+ - 4.4: Add preliminary support
+ - Add 3.14.mx6_legacy patches
+ - 3.19+: add a fix to be able to build imx_v6_v7_defconfig mainline defconfig
+ - prevent some custom armadeus drivers to be selected on not supported platforms
+ - APF6: all most used configs: add CONFIG_FHANDLE to be compatible with systemd (bis)
+ - APF6: all most used configs: add CONFIG_FHANDLE to be compatible with systemd
+ - APF6: 3.10: add some serial USB adapters drivers to default config
+ - APF6: 3.19+: add USB serial gadget to default configs
+ - 3.19 / 4.0: apf6: dts: Fix WiFi settings
+ - 3.19 / 4.0: apf6: enable Wi-Fi drivers
+ - APF6: mainline/legacy: add drivers for Ethernet over USB devices
+ - 3.19: APF6: add cpufreq to default config
+ - APF6: 3.10legacy/3.19/4.0: add rfkill to default config or remove obsolete rfkill-input when activated
+
+ APF27 changes:
+ - 2.6.29: apf27: add support for USB3320 phy on apf27v2
+ - 3.19+: APF27: activate spidev by default on SPI3 (J8 connector)
+ - patches:linux: 3.14 suppress useless 3.14.17 and add missing 3.14.39 needed by apf27xenomaimainline_defconfig
+
+ APF28 changes:
+ - 3.19: fix eth0 up down issue on apf28
+ - 3.19 / 4.0: apf28: fix gpio-key polarity
+
+* U-Boot:
+ - opos6ul/opos6ulnano: bump to ed432e132cf358593dd3aca5abc2024adf2d9288
+ - opos6ul/opos6ulnano: bump to 6599a0ebbd68e13c29a0cb325c03718eb987a7f1
+ - opos6ul/opos6ullegacy-4.1: bump to latest U-Boot
+ - opos6ul: bump to 2018.05
+ - opos6ul: bump to 2018.05-rc2
+ - opos6ulnano: bump to commit 41c5b7e32c6d54742d5d420e14c72517fb5b0640
+ - Use sha1 string instead of branch name
+ - opos6ulnano: bump to commit 5b608772040dec0638711b6bb7b788da62c38c61
+ - opos6ulnano: bump to commit eac402feb5a4132665fec84ed243c1008011c8f2
+ - apf28: fix patch 502 to make dtb working again
+ - apf28: add U-Boot config to support mainline linux kernel
+ - apf28: fix compilation by renaming some compilation flag
+ - apf27: add U-Boot config to support mainline linux kernel
+ - port patchwork to U-Boot 2017.01. Also refactor apf27 SPL
+ - All boards: define CONFIG_STANDALONE_LOAD_ADDR in configs supposed to support it. That way, one might be able to test U-Boot standalone apps.
+ - 2015.01: update patches to better suite format needed by git-am
+ - 2015.01: rename patches to better fit git format-patch output
+ - 2014.07: fix compilation with GCC5
+ - 2015.01: apf28: RAM size detection workaround
+ - APF6: 2014.07+: set APF6 eMMC boot partition size to 48Mbytes and not 24. Updates related tools accordingly.
+
+* Firmware:
+ - adding bitstream for the wiki full howto
+ -Â fpgaloader module must be unloaded once bitsrteam loader under fpga for apf6
+ - firmware: simple blinking led example for apf6sp code
+
+* Demos:
+ - capture: add possibility to crop camera input and move cropping zone dynamically
+ - capture: fixes YUV420 -> grayscale decoding and fps selection when forcing YUV420 mode
+ - capture: allow to pause/restart stream when pressing SPACE key
+ - capture: add an option to choose camera framerate. Rename some options to fit new one. Fixes fps calculation while we are at it...
+ - capture: add possibilities to choose SoC input mode and sensor capture mode (mostly of use on i.MX6 and OV5640)
+ - capture: cleanup & trace improving
+ - capture: add RGB24 support (needed by some v4l2loopback examples)
+ - capture: add a runtime option to activate debug messages and improve format matching messages
+ - capture: add a runtime option to force YUV420 mode on camera
+ - fb_alpha: factorize some printed infos
+ - capture: add support for 32 bits framebuffer (HDMI on APF6) and now display framerate
+ - Add a small tool (fb_alpha) to play with i.MX6 framebuffer overlay/alpha channels
+ - oscillo: add real hardware support through AsDevices
+ - oscillo: add 32bpp framebuffer support
+ - oscillo: makes drawing cursor visible
+ - oscillo: create installdir when not existing
+ - oscillo: Makefile beautifying
+ - Add the possibility to launch an action when pressing mouse button in capture demo.
+
+* Debug:
+ - imx28regs: add HW_PINCTRL_MUXSEL7
+ - imx6regs: move IPUx_FS_XXX_FLOW_N registers declaration and add IPUx_PROC_TASKS_STAT one
+ - imxregs : add SAI Registers
+ - imxregs: fixes bug when writing to registers (with glibc scanf() ??)
+ - imxregs: imx6: add MMDC1_MDCTL register
+ - Add some CCM registers to imxregs for i.MX6UL
+ - imx6ulregs: add some LCDIF registers definition and add imx6ulregs to opos6ul_defconfig
+ - Add an i.MX6UL version for imxregs
+
+* Test:
+ - Add a new script to display i.MX6UL ADC values
+ - bluetooth: add OPOS6UL support
+ - backlight: fix backlight /sys path
+ - package: prboom: add OPOS6UL support
+ - package: python: add OPOS6UL support
+ - package: mplayer: add OPOS6UL support
+ - usb_device: add OPOS6UL support
+ - wifi: add OPOS6UL support
+ - media_perf: add OPOS6UL support (USB only)
+ - gpio: add OPOS6UL support
+ - adc: add OPOS6UL support
+ - dac: OPOS6UL is not supported
+ - touchscreen: add OPOS6UL support
+ - usb_host: add OPOS6UL support
+ - rs232: add OPOS6UL support (ttymxc1)
+ - Add OPOS6UL support to test_backlight.sh
+ - test_imxregs.sh: fix sed expression
+ - test_imxregs: properly extract ID_REG value
+
+* Tools:
+ - Add a tool to read/modify OV5640 registers from userspace
+ - opos6ul: update uboot binaries
+ - add opos6ulnano recovery support
+ - Add some examples to do bare-metal programming on APF6
+ - Fixes scripts/quiltify.sh when no filtered patches are found
+ - Fixes scripts/quiltify.sh for U-Boot with given PATH_DIR in BR
+ - quiltify.sh: fix typo
+ - opos6ul_recovery.py: fixes error message when no imx-usb-loader is found on Host.
+ - fix scripts/quiltify.sh usage with (new) SVN
+ - {apf6,opos6ul}_recovery: set baudrate before ymodem transfer
+ - opos6ul_recovery: improve comment for BOOT jumpers
+ - opos6ul: update uboot binaries
+ - apf6_recovery: configs files path of imx_usb has changed. Fix it.
+ - opos6ul: update uboot binaries
+ - opos6ul: add recovery script and binaries
+ -: adding option to generate only nand_recover binary (not download it)
+ - Add some i.MX6 IPU registers to imxregs
+ - add u-boot patch generation to scripts/publish_patches.sh
+ - Fixes scripts/export_linux_config.sh when kernel has a strange name :-)
+
+* As_Devices:
+ - as_devices: fixes C++ wrapper selection with recent BR/external toolchain
+ - wiringPi: add userspace irq handling (with pthreads)
+ - as_gpio: add internal helper as_gpio_set_pin_irq_mode() to allow pin irq mode selection directly with its gpio number
+ - as_gpio: don't open/close /sys/class/gpio/gpioxx/value file each time as_gpio_set_pin_value() is called, but instead remember which gpio was requested and associated value file descriptor.
+ - as_gpio: rename as_gpio_open() to as_gpio_request() to better match what is done in Linux kernel
+ - wiringPi: don't quit program when wiringPiSetupSys() is called several time. Just signal it.
+ - wiringPi: add some comments
+ - wiringPi: add some more supported pins to GPIO mapping
+ - add wiringPi compatibility layer
+ - fixes compilation warnings
+ - Add drivers for BMP180 (pressure) & HMC5883L (accelerometer) I2C sensors (Python)
+
+* Other:
+ - .gitignore: add buildroot/{utils,patches}
+ - .gitignore: add buildroot/DEVELOPERS file
+ - [HARDWARE] Add a basic (WIP) APF6Dev SVG view
+ - [HARDWARE][OPOS6UL] Fixation PAD placement correction on footprint
+ - [HARDWARE][APF28] New kicad version of footprint
+ - [HARDWARE][OPOS6UL] fix bugs in part and footprint
+ - [HARDWARE][APF6] adding PAD_export schematic part and footprint for apf6
+ - [HARDWARE][APF6] adding PAD schematic part and footprint for apf6
+ - [HARDWARE][APF27] adding PAD_export schematic part and footprint for apf27
+ - [HARDWARE][APF27] adding PAD schematic part and footprint for apf27
+ - [HARDWARE][APF51] adding PAD_export schematic part and footprint for apf51
+ - [HARDWARE][APF51] adding PAD schematic part and footprint for apf51
+ - [HARDWARE][APF28] adding PAD_export schematic part and footprint for apf28
+ - [HARDWARE][APF28] adding kicad schematic part and footprint for apf28
+ - [HARDWARE][APF28] adding PAD schematic part and footprint for apf28
+ - [HARDWARE][OPOS6UL] adding kicad schematic part and footprint for opos6ul
+ - [BUILD] Add make help for opos6ul mainline config
+ - [BUILD] Add OPOS6UL support to test_imxregs.sh
+ - [BUILD] Improve Makefile help concerning configs
+ - [BUILD] now creates an archive with Linux modules in images/ dir
+ - [BUILD] Fixes scripts/export_linux_config.sh for recent kernels
+ - [BUILD] APF6UL -> OPOS6UL
+ - [BUILD] add ARMADEUS_U_BOOT_PATCH_DIR to shell_env.sh
+ - [BUILD] Use https://buildroot.org as Buildroot URL
+ - [BUILD] Download buildroot archive only if needed
+ - [BUILD] Fixes bug in armadeus_env.sh generation when BR2_LINUX_PATCH_DIR has more than one item
+
+
----
Changes in release armadeus-6.0 (released on Tuesday August 11th 2015)
diff --git a/buildroot/target/device/armadeus/rootfs/target_skeleton/etc/armadeus-version b/buildroot/target/device/armadeus/rootfs/target_skeleton/etc/armadeus-version
index b6803606e..4fedf1d20 100644
--- a/buildroot/target/device/armadeus/rootfs/target_skeleton/etc/armadeus-version
+++ b/buildroot/target/device/armadeus/rootfs/target_skeleton/etc/armadeus-version
@@ -1 +1 @@
-6.1-devt-git
+7.0
hooks/post-receive
--
armadeus
|
