[Armadeus-commitlog] armadeus branch, buildroot-update, updated. armadeus-6.0-178-gab299d9

[Sébastien S. <ss...@us...>]

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "armadeus".

The branch, buildroot-update has been updated
       via  ab299d991a3f7743b20373d9f79d741a6817a8a6 (commit)
      from  bba62375b7ae1e99065d239e131b69f9e12316ff (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit ab299d991a3f7743b20373d9f79d741a6817a8a6
Author: Sébastien Szymanski <seb...@ar...>
Date:   Fri Jan 6 12:10:05 2017 +0100

    [BUILDROOT] opos6ul: add brcmfmac43430-sdio.txt in rootfs overlay

-----------------------------------------------------------------------

Summary of changes:
 .../lib/firmware/brcm/brcmfmac43430-sdio.txt       |   66 ++++++++++++++++++++
 1 files changed, 66 insertions(+), 0 deletions(-)
 create mode 100644 buildroot/target/device/armadeus/rootfs/target_overlay/lib/firmware/brcm/brcmfmac43430-sdio.txt

diff --git a/buildroot/target/device/armadeus/rootfs/target_overlay/lib/firmware/brcm/brcmfmac43430-sdio.txt b/buildroot/target/device/armadeus/rootfs/target_overlay/lib/firmware/brcm/brcmfmac43430-sdio.txt
new file mode 100644
index 0000000..ea4f648
--- /dev/null
+++ b/buildroot/target/device/armadeus/rootfs/target_overlay/lib/firmware/brcm/brcmfmac43430-sdio.txt
@@ -0,0 +1,66 @@
+# NVRAM file for BCM943430WLPTH
+# 2.4 GHz, 20 MHz BW mode
+
+# The following parameter values are just placeholders, need to be updated.
+manfid=0x2d0
+prodid=0x0727
+vendid=0x14e4
+devid=0x43e2
+boardtype=0x0727
+boardrev=0x1101
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=11
+boardflags=0x00404201
+boardflags3=0x08000000
+xtalfreq=37400
+nocrc=1
+ag0=255
+aa2g=1
+ccode=ALL
+
+pa0itssit=0x20
+extpagain2g=0
+#PA parameters for 2.4GHz, measured at CHIP OUTPUT
+pa2ga0=-168,7161,-820
+AvVmid_c0=0x0,0xc8
+cckpwroffset0=5
+
+# PPR params
+maxp2ga0=84
+txpwrbckof=6
+cckbw202gpo=0
+legofdmbw202gpo=0x66111111
+mcsbw202gpo=0x77711111
+propbw202gpo=0xdd
+
+# OFDM IIR :
+ofdmdigfilttype=18
+ofdmdigfilttypebe=18
+# PAPD mode:
+papdmode=1
+papdvalidtest=1
+pacalidx2g=42
+papdepsoffset=-22
+papdendidx=58
+
+# LTECX flags
+ltecxmux=0
+ltecxpadnum=0x0102
+ltecxfnsel=0x44
+ltecxgcigpio=0x01
+
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+
+deadman_to=0xffffffff
+# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
+muxenab=0x1
+# CLDO PWM voltage settings - 0x4 - 1.1 volt
+#cldo_pwm=0x4
+
+#VCO freq 326.4MHz
+spurconfig=0x3 
+
+edonthd20l=-75
+edoffthd20ul=-80


hooks/post-receive
-- 
armadeus