[Armadeus-commitlog] armadeus branch, buildroot-update, updated. armadeus-6.0-90-gcbe1b37
Brought to you by:
sszy
Menu
▾
▴
[Armadeus-commitlog] armadeus branch, buildroot-update, updated. armadeus-6.0-90-gcbe1b37
|
From: Sébastien S. <ss...@us...> - 2016-06-03 09:12:50
|
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "armadeus".
The branch, buildroot-update has been updated
via cbe1b37e3a22b9e1e173714af1b908ff797d4e4c (commit)
via 9e3cf6a155adceeb256c55e8023663bd0a16dccc (commit)
from 7e90505ae1a5ca446ffacdde9efd491780afb3eb (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit cbe1b37e3a22b9e1e173714af1b908ff797d4e4c
Author: Sébastien Szymanski <seb...@ar...>
Date: Fri Jun 3 11:13:18 2016 +0200
[BUILDROOT] add opos6ul support
* Linux 4.6
* U-boot 2016.05
commit 9e3cf6a155adceeb256c55e8023663bd0a16dccc
Author: Sébastien Szymanski <seb...@ar...>
Date: Wed Jun 1 18:08:02 2016 +0200
[BUILDROOT] Check properly if BR2_TARGET_UBOOT_CUSTOM_HEADER_CONFIG_FILE_PATH is unset
-----------------------------------------------------------------------
Summary of changes:
buildroot/configs/.gitignore | 1 +
...{opos6ul_legacy_defconfig => opos6ul_defconfig} | 33 ++-
.../opos6ul-linux-4.6.config} | 226 ++++++++-------
...add_support_for_custom_configuration_file.patch | 8 +-
...pos6ul-and-opos6uldev-add-initial-support.patch | 315 ++++++++++++++++++++
5 files changed, 458 insertions(+), 125 deletions(-)
copy buildroot/configs/{opos6ul_legacy_defconfig => opos6ul_defconfig} (76%)
copy buildroot/target/device/armadeus/{apf6/apf6-linux-3.14.config => opos6ul/opos6ul-linux-4.6.config} (60%)
create mode 100644 patches/linux/4.6/0800-ARM-dts-opos6ul-and-opos6uldev-add-initial-support.patch
diff --git a/buildroot/configs/.gitignore b/buildroot/configs/.gitignore
index 0f18ac2..b312cc3 100644
--- a/buildroot/configs/.gitignore
+++ b/buildroot/configs/.gitignore
@@ -1,3 +1,4 @@
*_defconfig
!/apf*
!/pps*_defconfig
+!/opos6ul*
diff --git a/buildroot/configs/opos6ul_legacy_defconfig b/buildroot/configs/opos6ul_defconfig
similarity index 76%
copy from buildroot/configs/opos6ul_legacy_defconfig
copy to buildroot/configs/opos6ul_defconfig
index d871aa7..ba032ea 100644
--- a/buildroot/configs/opos6ul_legacy_defconfig
+++ b/buildroot/configs/opos6ul_defconfig
@@ -9,10 +9,10 @@ BR2_ENABLE_LOCALE_PURGE=y
BR2_TARGET_GENERIC_HOSTNAME="opos6ul"
BR2_TARGET_GENERIC_ISSUE="Welcome to Armadeus development platform !"
BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
-BR2_ROOTFS_OVERLAY="$(ARMADEUS_PATH)/rootfs/target_overlay"
BR2_TARGET_TZ_INFO=y
BR2_TARGET_TZ_ZONELIST="europe"
BR2_TARGET_LOCALTIME="Europe/Paris"
+BR2_ROOTFS_OVERLAY="$(ARMADEUS_PATH)/rootfs/target_overlay"
BR2_ROOTFS_POST_BUILD_SCRIPT="$(ARMADEUS_PATH)/rootfs/post_build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="$(ARMADEUS_PATH)/rootfs/post_image_creation.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="opos6ul imx6ul"
@@ -21,15 +21,16 @@ BR2_BOARD_NAME="opos6ul"
BR2_CPU_NAME="imx6ul"
BR2_TARGET_ARMADEUS_SDRAM_SIZE="256"
BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.14.52_1.1.0_ga"
-BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
-BR2_LINUX_KERNEL_ZIMAGE=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6"
+BR2_LINUX_KERNEL_PATCH="../patches/linux/$(BR2_LINUX_KERNEL_VERSION)"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-$(BR2_LINUX_KERNEL_VERSION).config"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6ul-14x14-evk"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6ul-opos6uldev"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
BR2_PACKAGE_BUSYBOX_CONFIG="$(ARMADEUS_PATH)/busybox.config"
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_ALSA_UTILS=y
BR2_PACKAGE_ALSA_UTILS_AMIXER=y
BR2_PACKAGE_ALSA_UTILS_APLAY=y
@@ -53,12 +54,11 @@ BR2_PACKAGE_FBV=y
# BR2_PACKAGE_FBV_JPEG is not set
# BR2_PACKAGE_FBV_GIF is not set
BR2_PACKAGE_LINUX_FIRMWARE=y
-BR2_PACKAGE_LINUX_FIRMWARE_TI_WL127X=y
+BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
BR2_PACKAGE_APF_CONFIG=y
BR2_PACKAGE_EVTEST=y
BR2_PACKAGE_I2C_TOOLS=y
BR2_PACKAGE_KBD=y
-BR2_PACKAGE_TI_UTILS=y
BR2_PACKAGE_UBOOT_TOOLS=y
BR2_PACKAGE_LIBVORBIS=y
BR2_PACKAGE_LIBUSB=y
@@ -70,6 +70,7 @@ BR2_PACKAGE_BC=y
BR2_PACKAGE_BLUEZ_UTILS=y
BR2_PACKAGE_CAN_UTILS=y
BR2_PACKAGE_DROPBEAR=y
+BR2_PACKAGE_ETHTOOL=y
BR2_PACKAGE_HOSTAPD=y
BR2_PACKAGE_IPERF=y
BR2_PACKAGE_IPROUTE2=y
@@ -87,13 +88,15 @@ BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_ROOTFS_EXT2_LABEL="ROOTFS"
BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="mx6ul_14x14_evk"
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_BOARDNAME="$(BR2_BOARD_NAME)"
BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.14.52_1.1.0_ga"
-BR2_TARGET_UBOOT_FORMAT_IMX=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.code.sf.net/p/armadeus/u-boot"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="opos6ul"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="opos6ul"
+BR2_TARGET_UBOOT_FORMAT_IMG=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="SPL"
BR2_PACKAGE_HOST_E2TOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_IMX_USB_LOADER=y
-BR2_PACKAGE_HOST_MTOOLS=y
diff --git a/buildroot/target/device/armadeus/apf6/apf6-linux-3.14.config b/buildroot/target/device/armadeus/opos6ul/opos6ul-linux-4.6.config
similarity index 60%
copy from buildroot/target/device/armadeus/apf6/apf6-linux-3.14.config
copy to buildroot/target/device/armadeus/opos6ul/opos6ul-linux-4.6.config
index ede29be..6eb0ec5 100644
--- a/buildroot/target/device/armadeus/apf6/apf6-linux-3.14.config
+++ b/buildroot/target/device/armadeus/opos6ul/opos6ul-linux-4.6.config
@@ -1,9 +1,9 @@
-# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_KERNEL_LZO=y
CONFIG_SYSVIPC=y
-CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_CGROUPS=y
CONFIG_RELAY=y
@@ -19,101 +19,107 @@ CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_MXC=y
-CONFIG_MXC_DEBUG_BOARD=y
# CONFIG_MACH_MX31ADS is not set
# CONFIG_MACH_BUG is not set
-CONFIG_MACH_IMX51_DT=y
-CONFIG_SOC_IMX53=y
-CONFIG_SOC_IMX6Q=y
-CONFIG_SOC_IMX6SL=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_IMX6=y
-CONFIG_SMP=y
-CONFIG_VMSPLIT_2G=y
+CONFIG_SOC_IMX6UL=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_ARM_PSCI=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
-CONFIG_CMDLINE="noinitrd console=ttymxc3,115200"
+CONFIG_HIGHMEM=y
+CONFIG_CMA=y
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
+CONFIG_KEXEC=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_ARM_IMX6Q_CPUFREQ=y
+CONFIG_CPU_IDLE=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_BINFMT_MISC=m
-CONFIG_PM_RUNTIME=y
CONFIG_PM_DEBUG=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
CONFIG_NETFILTER=y
-CONFIG_CAN=m
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_SLCAN=m
-CONFIG_CAN_FLEXCAN=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=m
+CONFIG_CAN=y
+CONFIG_CAN_FLEXCAN=y
+CONFIG_BT=y
+CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_CFG80211=y
-CONFIG_NL80211_TESTMODE=y
-CONFIG_CFG80211_WEXT=y
CONFIG_MAC80211=y
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
+CONFIG_DMA_CMA=y
CONFIG_IMX_WEIM=y
CONFIG_CONNECTOR=y
-CONFIG_PROC_DEVICETREE=y
+CONFIG_MTD=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_AT25=y
+CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_AHCI_IMX=y
-CONFIG_PATA_IMX=y
CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
-CONFIG_CS89x0=y
-CONFIG_CS89x0_PLATFORM=y
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_HISILICON is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_RENESAS is not set
+# CONFIG_NET_VENDOR_ROCKER is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
-CONFIG_SMC91X=y
-CONFIG_SMC911X=y
-CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
-CONFIG_AT803X_PHY=y
-# CONFIG_RTL_CARDS is not set
-CONFIG_WL_TI=y
-CONFIG_WL12XX=m
-CONFIG_WLCORE_SDIO=m
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN_VENDOR_ADMTEK is not set
+# CONFIG_WLAN_VENDOR_ATH is not set
+# CONFIG_WLAN_VENDOR_ATMEL is not set
+CONFIG_BRCMFMAC=m
+# CONFIG_WLAN_VENDOR_CISCO is not set
+# CONFIG_WLAN_VENDOR_INTEL is not set
+# CONFIG_WLAN_VENDOR_INTERSIL is not set
+# CONFIG_WLAN_VENDOR_MARVELL is not set
+# CONFIG_WLAN_VENDOR_MEDIATEK is not set
+# CONFIG_WLAN_VENDOR_RALINK is not set
+# CONFIG_WLAN_VENDOR_REALTEK is not set
+# CONFIG_WLAN_VENDOR_RSI is not set
+# CONFIG_WLAN_VENDOR_ST is not set
+# CONFIG_WLAN_VENDOR_TI is not set
+# CONFIG_WLAN_VENDOR_ZYDAS is not set
+CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
@@ -122,9 +128,7 @@ CONFIG_KEYBOARD_IMX=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_SX8674=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_MMA8450=y
+CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
CONFIG_SERIO_SERPORT=m
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
@@ -132,7 +136,6 @@ CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set
@@ -142,56 +145,63 @@ CONFIG_I2C_IMX=y
CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_IMX=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
+CONFIG_SENSORS_GPIO_FAN=y
+CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_THERMAL=y
+CONFIG_CPU_THERMAL=y
+CONFIG_IMX_THERMAL=y
CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_IMX2_WDT=y
-CONFIG_MFD_DA9052_I2C=y
-CONFIG_MFD_MC13XXX_SPI=y
-CONFIG_MFD_MC13XXX_I2C=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_ANATOP=y
-CONFIG_REGULATOR_DA9052=y
-CONFIG_REGULATOR_MC13783=y
-CONFIG_REGULATOR_MC13892=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_PFUZE100=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_RC_SUPPORT=y
+CONFIG_RC_DEVICES=y
+CONFIG_IR_GPIO_CIR=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SOC_CAMERA=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_CODA=y
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-# CONFIG_DVB_AU8522_V4L is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_DIB0090 is not set
-# CONFIG_VGA_ARB is not set
+CONFIG_SOC_CAMERA_OV2640=y
+CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_MX3 is not set
+CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
+CONFIG_DRM_IMX=y
+CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
+CONFIG_DRM_IMX_TVE=y
+CONFIG_DRM_IMX_LDB=y
+CONFIG_DRM_IMX_HDMI=y
+CONFIG_FB_MXS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_L4F00242T03=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_PCI is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
+CONFIG_SND_USB_AUDIO=m
CONFIG_SND_SOC=y
+CONFIG_SND_SOC_FSL_ASRC=y
CONFIG_SND_IMX_SOC=y
-CONFIG_SND_SOC_IMX_SGTL5000=y
CONFIG_SND_SOC_IMX_SPDIF=y
-CONFIG_HID_MULTITOUCH=y
+CONFIG_SND_SOC_FSL_ASOC_CARD=y
+CONFIG_SND_SIMPLE_CARD=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
@@ -201,24 +211,39 @@ CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_SIMPLE=m
-CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_EHSET_TEST_FIXTURE=m
CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_MXS_PHY=y
CONFIG_USB_GADGET=y
+CONFIG_USB_FSL_USB2=y
+CONFIG_USB_CONFIGFS=m
+CONFIG_USB_CONFIGFS_SERIAL=y
+CONFIG_USB_CONFIGFS_ACM=y
+CONFIG_USB_CONFIGFS_OBEX=y
+CONFIG_USB_CONFIGFS_NCM=y
+CONFIG_USB_CONFIGFS_ECM=y
+CONFIG_USB_CONFIGFS_ECM_SUBSET=y
+CONFIG_USB_CONFIGFS_RNDIS=y
+CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+CONFIG_USB_CONFIGFS_F_LB_SS=y
+CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
+CONFIG_USB_G_NCM=m
+CONFIG_USB_GADGETFS=m
CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
@@ -227,28 +252,20 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_MCP7940X=y
CONFIG_RTC_DRV_SNVS=y
CONFIG_DMADEVICES=y
CONFIG_IMX_SDMA=y
CONFIG_MXS_DMA=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-CONFIG_UIO_DMEM_GENIRQ=y
+# CONFIG_MX3_IPU is not set
CONFIG_STAGING=y
-CONFIG_DRM_IMX=y
-CONFIG_DRM_IMX_FB_HELPER=y
-CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
-CONFIG_DRM_IMX_LDB=y
-CONFIG_DRM_IMX_IPUV3_CORE=y
-CONFIG_DRM_IMX_IPUV3=y
-CONFIG_DRM_IMX_HDMI=y
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IIO=y
+CONFIG_VF610_ADC=y
CONFIG_PWM=y
+CONFIG_PWM_FSL_FTM=y
CONFIG_PWM_IMX=y
-CONFIG_ARMADEUS_DRIVERS=y
-CONFIG_ARMADEUS_FPGA_DRIVERS=y
-CONFIG_ARMADEUS_FPGA_LOADER_DRIVER=m
+CONFIG_NVMEM=y
+CONFIG_NVMEM_IMX_OCOTP=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
@@ -256,23 +273,18 @@ CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
-CONFIG_ISO9660_FS=y
+CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
+CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
@@ -283,6 +295,8 @@ CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_PROVE_LOCKING=y
@@ -292,8 +306,8 @@ CONFIG_PROVE_LOCKING=y
CONFIG_SECURITYFS=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
+CONFIG_CRYPTO_DEV_SAHARA=y
CONFIG_CRC_CCITT=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC7=m
diff --git a/patches/buildroot/2016.05/050-U-Boot-add_support_for_custom_configuration_file.patch b/patches/buildroot/2016.05/050-U-Boot-add_support_for_custom_configuration_file.patch
index 9734db2..0d7dfb6 100644
--- a/patches/buildroot/2016.05/050-U-Boot-add_support_for_custom_configuration_file.patch
+++ b/patches/buildroot/2016.05/050-U-Boot-add_support_for_custom_configuration_file.patch
@@ -23,7 +23,7 @@ Index: buildroot/boot/uboot/Config.in
choice
prompt "U-Boot Version"
-@@ -146,6 +144,12 @@ config BR2_TARGET_UBOOT_NEEDS_DTC
+@@ -137,6 +135,12 @@ config BR2_TARGET_UBOOT_NEEDS_DTC
Select this option if your U-Boot board configuration
requires the Device Tree compiler to be available.
@@ -40,11 +40,11 @@ Index: buildroot/boot/uboot/uboot.mk
===================================================================
--- buildroot.orig/boot/uboot/uboot.mk
+++ buildroot/boot/uboot/uboot.mk
-@@ -128,6 +128,14 @@ define UBOOT_APPLY_LOCAL_PATCHES
+@@ -125,6 +125,14 @@ define UBOOT_APPLY_LOCAL_PATCHES
endef
UBOOT_POST_PATCH_HOOKS += UBOOT_APPLY_LOCAL_PATCHES
-+ifneq ($(BR2_TARGET_UBOOT_CUSTOM_HEADER_CONFIG_FILE_PATH),)
++ifneq ($(call qstring,$(BR2_TARGET_UBOOT_CUSTOM_HEADER_CONFIG_FILE_PATH)),)
+define UBOOT_COPY_HEADER_CONFIG_FILE
+ cp -pf $(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_HEADER_CONFIG_FILE_PATH)) \
+ $(@D)/include/configs/$(UBOOT_BOARD_NAME).h
@@ -55,7 +55,7 @@ Index: buildroot/boot/uboot/uboot.mk
ifeq ($(BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY),y)
define UBOOT_CONFIGURE_CMDS
$(TARGET_CONFIGURE_OPTS) \
-@@ -219,14 +227,13 @@ endif
+@@ -225,14 +233,13 @@ endif
ifeq ($(BR2_TARGET_UBOOT)$(BR_BUILDING),yy)
#
diff --git a/patches/linux/4.6/0800-ARM-dts-opos6ul-and-opos6uldev-add-initial-support.patch b/patches/linux/4.6/0800-ARM-dts-opos6ul-and-opos6uldev-add-initial-support.patch
new file mode 100644
index 0000000..04698d7
--- /dev/null
+++ b/patches/linux/4.6/0800-ARM-dts-opos6ul-and-opos6uldev-add-initial-support.patch
@@ -0,0 +1,315 @@
+From b22204b2031d7ad3f6c5d21c96458488501be45a Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?S=C3=A9bastien=20Szymanski?=
+ <seb...@ar...>
+Date: Thu, 2 Jun 2016 18:53:59 +0200
+Subject: [PATCH] ARM: dts: opos6ul and opos6uldev add initial support
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Sébastien Szymanski <seb...@ar...>
+---
+ arch/arm/boot/dts/Makefile | 3 +-
+ arch/arm/boot/dts/imx6ul-opos6ul.dtsi | 171 ++++++++++++++++++++++++++++++++
+ arch/arm/boot/dts/imx6ul-opos6uldev.dts | 97 ++++++++++++++++++
+ 3 files changed, 270 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm/boot/dts/imx6ul-opos6ul.dtsi
+ create mode 100644 arch/arm/boot/dts/imx6ul-opos6uldev.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 95c1923..4b775b5 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -374,7 +374,8 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
+ imx6sx-sdb-reva.dtb \
+ imx6sx-sdb.dtb
+ dtb-$(CONFIG_SOC_IMX6UL) += \
+- imx6ul-14x14-evk.dtb
++ imx6ul-14x14-evk.dtb \
++ imx6ul-opos6uldev.dtb
+ dtb-$(CONFIG_SOC_IMX7D) += \
+ imx7d-cl-som-imx7.dtb \
+ imx7d-sbc-imx7.dtb \
+diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
+new file mode 100644
+index 0000000..992cdf9
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
+@@ -0,0 +1,171 @@
++/*
++ * Copyright 2016 Armadeus Systems
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public
++ * License along with this file; if not, write to the Free
++ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
++ * MA 02110-1301 USA
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++#include "imx6ul.dtsi"
++
++&fec1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_enet1>;
++ phy-mode = "rmii";
++ phy-reset-duration = <1>;
++ phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
++ phy-handle = <ðphy1>;
++ status = "okay";
++
++ mdio {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ ethphy1: ethernet-phy@1 {
++ compatible = "ethernet-phy-ieee802.3-c22";
++ reg = <1>;
++ interrupt-parent = <&gpio4>;
++ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
++ status = "okay";
++ };
++ };
++};
++
++/* Bluetooth */
++&uart8 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart8>;
++ fsl,uart-has-rtscts;
++ //status = "okay";
++};
++
++/* eMMC */
++&usdhc1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_usdhc1>;
++ bus-width = <8>;
++ no-1-8-v;
++ non-removable;
++ status = "okay";
++};
++
++/* WiFi */
++&usdhc2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_usdhc2>;
++ bus-width = <4>;
++ no-1-8-v;
++ //status = "okay";
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ brcmf: bcrmf@1 {
++ compatible = "brcm,bcm4329-fmac";
++ reg = <1>;
++ interrupt-parent = <&gpio2>;
++ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
++ interrupt-names = "host-wake";
++ };
++};
++
++&iomuxc {
++ pinctrl_enet1: enet1grp {
++ fsl,pins = <
++ MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
++ MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
++ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0
++ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0
++ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0
++ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0
++ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
++ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
++ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
++ /* INT# */
++ MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0
++ /* RST# */
++ MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0
++ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
++ >;
++ };
++
++ pinctrl_uart8: uart8grp {
++ fsl,pins = <
++ MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0
++ MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0
++ MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0
++ MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0
++ /* BT_REG_ON */
++ MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0
++ >;
++ };
++
++ pinctrl_usdhc1: usdhc1grp {
++ fsl,pins = <
++ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
++ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
++ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
++ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
++ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
++ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
++ MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059
++ MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059
++ MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059
++ MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059
++ >;
++ };
++
++ pinctrl_usdhc2: usdhc2grp {
++ fsl,pins = <
++ MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0
++ MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0
++ MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0
++ MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0
++ MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0
++ MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0
++ /* WL_REG_ON */
++ MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0
++ /* WL_IRQ */
++ MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0
++ >;
++ };
++};
+diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/imx6ul-opos6uldev.dts
+new file mode 100644
+index 0000000..c31ad70
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6ul-opos6uldev.dts
+@@ -0,0 +1,97 @@
++/*
++ * Copyright 2016 Armadeus Systems
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public
++ * License along with this file; if not, write to the Free
++ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
++ * MA 02110-1301 USA
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++#include "imx6ul-opos6ul.dtsi"
++
++/ {
++ model = "Armadeus Systems OPOS6UL Module on OPOS6UL Dev board";
++ compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul";
++
++ chosen {
++ stdout-path = &uart1;
++ };
++
++ memory {
++ reg = <0 0>; /* will be filled by U-Boot */
++ };
++};
++
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart1>;
++ status = "okay";
++};
++
++&usbotg1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_usbotg1>;
++ dr_mode = "otg";
++ phy_type = "utmi";
++ status = "okay";
++};
++
++&usbotg2 {
++ dr_mode = "host";
++ phy_type = "utmi";
++ status = "okay";
++};
++
++&iomuxc {
++ pinctrl_uart1: uart1grp {
++ fsl,pins = <
++ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
++ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
++ >;
++ };
++
++ pinctrl_usbotg1: usbotg1grp {
++ fsl,pins = <
++ MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0
++ >;
++ };
++};
+--
+2.3.6
+
hooks/post-receive
--
armadeus
|