[Armadeus-commitlog] armadeus annotated tag, armadeus-6.0, created. armadeus-6.0

[Julien B a. A. <ar...@us...>]

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "armadeus".

The annotated tag, armadeus-6.0 has been created
        at  0eb5b2bbd3b2079a0e1521417ba93be751f1c8cc (tag)
   tagging  3efe51a8670c94adf2c08559ead96e8064400121 (commit)
  replaces  armadeus-5.3
 tagged by  Julien Boibessot
        on  Tue Aug 11 20:28:22 2015 +0200

- Log -----------------------------------------------------------------
Creating TAG for armadeus-6.0 release

Eric Jarrige (91):
      Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
      [LINUX] 3.12: apf27dev: rename touchscreen patch
      [LINUX] 3.13: apf27dev: add tsc2102 device tree support. Thx Yvan
      [BUILDROOT] apf28: update configs to ccache
      [BUILDROOT] apf9328: update configs to ccache
      [BUILDROOT] apf27: update apf27mainline_defconfig configs to safely use ccache
      [BUILDROOT] apf51: update apf51mainline_defconfig configs to safely use ccache
      [LINUX] 3.13: APF27: first draft adding USB to device tree
      [LINUX] 3.13: APF27: Add missing USB drivers to the APF27 linux config
      [LINUX] 3.13: put apf27 USB aside: work still in progress
      [LINUX] 3.13: imx27: update USB drivers to support the imx27
      [LINUX] 3.13: apf27: add 2 USB ports to the apf27 device tree
      [LINUX] 3.13: apf27: remove legacy non DT based config
      Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
      [LINUX] 3.13: apf27: fix LCD backlight/brightness adjustment
      [LINUX] 3.13: apf27: remove obsolet patch - not used with Open Firmware / DT
      [LINUX] 3.13: apf27: add i2c eeprom 24c02 and i2c2 bus to device tree
      [BUILD] do not delete final firmware and uboot binary images
      [BUILROOT] remove unsupported command uboot-clean - use uboot-rebuild instead
      Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
      [LINUX] apf28: add missing gpio-key driver to the kernel 3.13 and 3.12
      [LINUX] 3.13: apf28: add wakeup behavior to the apf28 user key
      [LINUX] 3.13: apf27: add user button wakeup behavior
      [LINUX] 3.13: apf51dev: add user button wakeup behavior
      [LINUX] 3.13: apf27dev: change apf27 to apf27dev in patch description
      [LINUX] 3.14: afp27: add config and fix patch for 3.14-rc1
      [LINUX] 3.14-rc1: apf28: add kernel config
      [UBOOT] 2013.04: apf51: add default SPL_TARGET
      [BUILDROOT] 2013.11: patch cleanup - UBoot for apf51 can be built with a simple make command
      [UBOOT] 2013.04: apf51: cleanup config
      [UBOOT] apf27: move to U-Boot standard SPL target name u-boot-with-spl.bin
      [BUILDROOT] apf27: update U-Boot target name
      [BUILDROOT] apf27: update U-Boot target name from every config
      [BUILDROOT] pps27: update U-Boot target name
      [UBOOT] pps27: move to U-Boot standard SPL target name u-boot-with-spl.bin
      [UBOOT] 2013.04: remove patch supporting the legacy build target u-boot-nand.bin
      [UBOOT] 2013.04: pps27: delete legacy CONFIG_NAND_U_BOOT option and fix U-Boot build
      [BUILDROOT] ltrace: Fix download url
      [UBOOT] 2014.04: apf9328: initiate migration
      [UBOOT] 2014.04: apf9328: add default configuration
      [UBOOT] 2014.04: add apf27 patchwork
      [UBOOT] 2014.04: apf27: add default configuration
      [UBOOT] 2014.04: add apf28 patchwork
      [UBOOT] 2014.04: apf28: add default configuration
      [UBOOT] 2014.04-rc3: update apf28 patchwork
      [BUILDROOT] openssl: bump to version 1.0.1g to fix critical http://heartbleed.com issue
      [UBOOT] 2014.04: update apf28 patch
      [UBOOT] 2014.04: apf27: support boot from RAM
      [LINUX] 3.15: afp51: fix pinctrl
      [UBOOT] 2014.04: add apf51 patchwork
      [UBOOT] 2014.04: apf51: add board configuration
      [UBOOT] 2014.04: apf51: cleanup
      [UBOOT] 2014.04: afp51: patch refactoring
      [UBOOT] 2014.04: apf51: fix ethernet PHY signal integrity
      [UBOOT] 2014.04: apf51: cleanup
      [UBOOT] 2014.04: apf51: fix i2c bus
      [UBOOT] 2014.04: Fix tftp direct download to NAND flash
      [UBOOT] 2014.04: pps27: add board configuration
      [UBOOT] apf9328: bump to U-Boot 2014.04
      [UBOOT] apf27: bump to U-Boot 2014.04
      [UBOOT] apf51: bump to U-Boot 2014.04
      [UBOOT] apf28: bump to U-Boot 2014.04
      [UBOOT] pps27: bump to U-Boot 2014.04
      [UBOOT] pps51: bump to U-Boot 2014.04
      [UBOOT] 2014.07: update patchwork (preliminary)
      [UBOOT] 2014.07: update after release 2014.07
      [UBOOT] 2014.07: Fix apf9328 FPGA behavior
      [LINUX] 3.15: Fix patch syntax
      [LINUX] 3.16: move to 3.16-rc7
      [LINUX] 3.16: Fix patch syntax
      [LINUX] 3.16: Fix again patch syntax
      [LINUX] 3.18: move to 3.18-rc2
      [LINUX] 3.18: clean up patchwork
      [UBOOT] 2015.01: add patchwork to support U-Boot 2015.01
      [UBOOT] 2015.01: add apf27 U-Boot config
      [UBOOT] 2015.01: add apf9328 U-Boot config
      [BUILDROOT] 2013.11: fix network options to work with recent U-Boot release
      [UBOOT] 2015.01: apf51: fix FPGA management failure
      [UBOOT] 2015.01: add apf28 U-Boot config
      [UBOOT] 2015.01: add apf51 U-Boot config
      [UBOOT] 2015.01: update apf27 U-Boot config
      [UBOOT] 2015.01: apf9328: Fix compil issue
      [UBOOT] apf9328: Bump to U-Boot 2015.01
      [UBOOT] 2015.01: apf27: update config to be used with mainline kernel
      [UBOOT] 2015.01: apf28: update config to be used with mainline kernel
      [BUILDROOT] apf27: Bump to U-Boot 2015.01
      [BUILDROOT] apf28: Bump to U-Boot 2015.01
      [UBOOT] 2015.01: apf6: don't use env vars in bootstrap
      [BUILDROOT] apf51: Bump to U-Boot 2015.01
      [UBOOT] 2015.01: update apf6 U-Boot config and fix compilation
      Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code

Fabien Marteau (32):
      [linux][pod_gpio] set output value in pod_gpio_direction_out()
      Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
      Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
      [DEBUG]fpgaregs: compile without warnings with g++
      [uboot] firmware_autoload must be set to 1 for autoload
      [uboot] firmware_autoload set to 0 by default
      [fpga] adding a standard/example bistream for apf27dev
      [BUILDROOT]packages: addings imx_usb_loader for i.MX6, i.MX51 and i.MX53
      [U-BOOT] SPL-Boot apf6 on eMMC
      [U-BOOT][APF6] Boot Linux on eMMC by default
      [U-BOOT][APF6] eMMC dev number are inverted on uboot
      [U-BOOT][APF6] use BIOS> as prompt like other apf*
      [UBOOT][APF6] Boot Linux on eMMC by default (bis)
      [LINUX] fix mmc numbering, eMMC->mmcblk2, SD -> mmcblk1
      [UBOOT] Under Linux, eMMC is now mmcblk2 (staticaly defined)
      [KERNEL] adding fpga loading driver by default in menuconfig
      [KERNEL] load altera fpgaloader module before creating node
      [DEBUG] Adding pci_debug commands tool to access PCIe BARx memory from linux userspace
      [LINUX] more return checking
      [LINUX] dos->unix file format
      [TOOLS]scripts/export_linux_config.sh: print diff command
      [LINUX][APF6]buildroot/target/device/armadeus/apf6/apf6-linux-3.19.config: setting MSI and pci debug in linux configuration
      [LINUX][APF6]buildroot/target/device/armadeus/apf6/apf6-linux-3.19.config: setting UIO drivers in linux configuration
      [LINUX][APF6]config: propagate MSI and UIO option to all apf6 linux config
      [LINUX][APF6]config: PCI_DEBUG not by default
      [firmware] adding bitstream for blinking led on apf6x_sp C4 cycloneV
      [LINUX][APF6] do not change PCIe clock frequency under Linux (must be done in UBoot)
      [U-BOOT][APF6] change PCIe clock frequency to 125Mhz when loading fpga in uboot
      [U-BOOT][APF6] adding firmware_autoload in uboot environment variables
      [LINUX][APF6] FabienM is guilty
      [DEMOS][APF6SP][DRIVER] Adding a simple demo driver for MSI interrupt with PCIe
      [TOOLS][APF6]apf6_recovery.py: python nitpicks

Gaetan Hug (1):
      [LINUX] 3.18+: APF28: fixes bug in PWM period computation

Gwenhael Goavec-Merou (22):
      [LINUX][3.13] apf51: fix screen clk polarity issue
      [LINUX][3.14] fix patch 0431
      [LINUX][3.14] imx51: usbphy1 has no real clock, use dummy clk aka 0
      [LINUX][3.14] apf51: add OTG_PWR pin to hog
      [LINUX][3.14] apf51: add 3.14(-rc4) kernel config
      [LINUX][3.16] fix patches 0444, 0445
      [LINUX][3.16] usb: switch phy configuration and initialisation
      Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
      [LINUX][3.16] net: phy: fix LAN8700 phy reset
      [LINUX][3.16] suppress patch 0444-armadeus-fix_phy_init.patch.patch (wrong solution)
      [LINUX][3.16] simplify 0444 and 0445
      [LINUX][3.16] imx27: add a trick to enable usb_div and avoid usb crash
      [UBOOT] apf27: add uboot config dedicated for mainline kernel (ie console and dtb)
      [BUILDROOT] apf27mainline : use uboot config for mainline kernel
      [LINUX] apf27: 3.14: backport and adapt patch 0232 from 3.16
      [BUILDROOT] apf27xenomaimainline: move xenomai to 2.6.4 and ipipe to 3.14.17
      [LINUX] apf27xenomai: move to 3.14.17
      [LINUX] add 3.14.17 support for xenomai
      fix problem with env BR2_DL_DIR not used
      use ARMADEUS_DL_DIR (defined in Makefile.in) instead of BUILDROOT_DL_DIR (obsolete with recent buildroot)
      Makefile: fix issue with ARMADEUS_DL_DIR when nor BUILDROOT_DL_DIR nor BR2_DL_DIR defined
      Makefile.in: fix 'always download buildroot archive' by suppressing potential double quote in ARMADEUS_DL_DIR

Jeremie Scheer (15):
      [BUILDROOT] Fix application of uclibc patches for accept4 kernel function.
      [BUILDROOT] Fix Poppler compilation when Qt isn't compiled in Buildroot.
      Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
      Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
      [BUILDROOT] Adapt Marble to BR 2013.11 and update to most stable version.
      [BUILDROOT] Delete Poppler to-fix patch.
      [BUILDROOT] Put fontconfig dependencies out of Qt condition in Poppler patch.
      [BUILDROOT] Optimize and enhance Marble package patch.
      [BUILDROOT] Fix Qt's URL.
      [AS_DEVICES] Remove warnings when generating documentation with Doxygen.
      [AS_DEVICES] Doxygen modules description in English.
      [AS_DEVICES] Don't display C wrappers for Python in documentation.
      [BUILDROOT] Add package Shiboken.
      [BUILDROOT] Fix last commit for Shiboken package by selecting needed Qt's options.
      [BUILDROOT] Fix shiboken configuration directory in config files.

Julien Boibessot (262):
      Updates /etc/armadeus-version and scripts/release/changes.sh for master devt trunk
      [BUILDROOT] Add support for BR 2013.11 (step 1)
      [BUILDROOT] Add basic APF6quad support (Linux 3.12)
      [BUILDROOT] All boards: updates defconfigs for BR 2013.11
      [BUILDROOT] Add support for BR 2013.11 (step 2: apf27 build fix)
      [BUILDROOT] Add support for BR 2013.11 (step 3: apf27/28/test build fix)
      [BUILD] Fixes build infos for successive builds with different targets
      [BUILDROOT] Now uses BR post build script infrastructure to symlink generated images for armadeus u-boot compatibility
      [BUILDROOT] All boards: updates defconfigs for BR 2013.11 (only U-Boot is still not compiling on APF51 like boards)
      [BUILD] Activates BR 2013.11 by default and cleanup main Makefile
      [BUILDROOT] Fixes U-Boot build on APF51 after BR 2013.11 migration
      [BUILDROOT] APF51: fixes ccache dirname to allow successive and parallel builds
      [BUILDROOT] Fixes images symlink generation to unbreak automatic build
      [BUILDROOT] APF27: fixes ccache dirname to allow successive and parallel builds
      [LINUX] 3.12: apf27dev: dts: fixes heartbeat LED polarity
      [LINUX] 3.12: apf27 config: add stuff to test VPU and CSI drivers
      [LINUX] 3.13: apf27dev: fixes heartbeat LED polarity and build drivers to test VPU and CSI
      [LINUX] 2.6.29: apf27dev: add support for MT9M111 & OV7670 derived camera modules
      [BUILD] Updates buildroot/package/.gitignore for BR 2013.11+
      [BUILDROOT] Add gstreamer and libv4l (+tools) to test defconfigs
      [LINUX] apf27: 3.12+: makes VPU firmware loading OK
      [BUILDROOT] Fixes CUnit repository address
      [BUILD] Fixes quiltify when used with customs BR2_DL_DIR
      [LINUX] APF6: 3.14: Fixes boards name in dtsi
      [LINUX] APF6: Add support for Linux 3.10.18 (for Xenomai)
      [BUILDROOT] APF6: Add a config for building xenomai for the APF6 (kernel 3.10.18)
      [BUILDROOT] Busybox 1.21: Add ash getopts in default config to ease xenomai tests usage
      [BUILDROOT] Xenomai 2.4/2.5: make it compile again on APF9328
      [BUILDROOT] Add a config for Xenomai on APF9328
      [BUILDROOT] Add owfs package
      [BUILDROOT] Add owfs package (part 2 ;-) )
      [LINUX] APF27: 2.6.29: Fixes 367-armadeus-gpio-add_spinlock_protection.patch (do not compile with adeos changes)
      [BUILDROOT] Add a config to easily compile an APF27 Linux kernel with xenomai/adeos
      [BUILDROOT] APF27: add a Linux 2.6.29 config for xenomai usage
      [LINUX] 3.14: merges all 3.14-rc4 stuff back in 3.14 (part 1, the copy)
      [LINUX] 3.14: merges all 3.14-rc4 stuff back in 3.14 (part 2, the deletion, rc2 also)
      [LINUX] 3.14: cleanup APF6 config and add OSS, pwm_backlight and multitouch USB screens support
      [BUILDROOT] APF6 config: add hardfloat toolchain, ccache, post-build, armadeus busybox config, alsa and some test apps (fbv, fbgrab, evtest and i2ctools). Also purge locale to gain some MBytes in rootfs.
      [LINUX] 3.14: merges all 3.14-rc4 stuff back in 3.14 (part 4, the deletion 2, the revenge :-))
      [LINUX] 3.14: merges all 3.14-rc4 stuff back in 3.14 (part 3, re-creation of the symlink)
      [LINUX] 3.14: APF6: cleanup default configs (includes MTD removal)
      [LINUX] 3.14: APF6: only rc4/rc5 is available currently
      [LINUX] 3.14: APF51: Add a default config (symlink)
      [LINUX] 3.14: APF51: Add missing patches forgotten during rc4 -> rc5
      [BUILDROOT] Add agg package
      [BUILDROOT] Add gnash package (Flash player, Work In Progress)
      [LINUX] 3.4: Add watchdog driver for i.MX28 (vanilla/mainline backport)
      [TOOLS] Add some comments in gpio_helpers.sh
      [BUILDROOT] Add xc3sprog package
      [BUILDROOT] xc3sprog: add patch to support XC2C32A_QF32 CPLD
      [BUILDROOT] Add sam7_pgm-ng package
      [DEBUG] fpgaregs: fixes bug introduced by previous commit (g++ warning removal)
      [DEBUG] fpgaregs: cleanup
      [DEBUG] fpgaregs: cleanup (code & BR package)
      [AS_DEVICES] python/Makefile: indent
      [BUILDROOT] 2013.11: Add Tk package
      [BUILDROOT] 2013.11: Add support for Tkinter in Python
      [BUILDROOT] 2013.11: fixes some comments in pygame package (Numeric has been deprecated for Numpy in Pygame)
      [AS_DEVICES] Fixes some compilation warnings and do some beautifying while we are at it
      [ASDEVICES] Cleanup
      [ASDEVICES] Add C wrappers to drive TCS3472 color converter chips
      [BUILDROOT] 2013.11: fixes Tk build
      [ASDEVICES] Lindent some C files
      [ASDEVICES] Fixes Doxygen warning on some C modules
      [ASDEVICES] Fixes C++ modules build
      [ASDEVICES] Lindent of Python module C wrappers
      [BUILDROOT] 2013.11: fixes libhid download site
      [ASDEVICES] Lindent all C modules sources... again...
      [ASDEVICES] Lindent python C wrappers sources... again...
      [LINUX] APF27/51/28: Update Linux 3.14 support to 3.14.8
      [LINUX] APF27: 3.15+: Makes LCD work again on APF27Dev and move Linux 3.15 support to 3.15.1 while we are at it.
      [LINUX] 3.15+: APF27: finally fixes patches needed/not needed to have LCD working on APF27Dev
      [BUILD] Fixes build informations when BR2_HOST_DIR is not set to default value
      [LINUX] 3.1x: APF27/51: move Armadeus specific FPGA mapping include to include/linux/armadeus_fpga.h
      [LINUX] Make pod_gpio and apf27-fpga-loader drivers build again on recent Linux kernels
      [LINUX] 3.15: fixes 0445-armadeus-dts-add-apf27-USB-support.patch
      [BUILDROOT] Fixes fpgaregs executable rights, wiped out by a previous cleanup commit
      [ASDEVICES] Cleanup BR package makefile
      [LINUX] 3.13: re-add as1531 hwmon driver (only for 3.13 until it really works)
      [LINUX] Fixes build of wishbone irq_mngr driver on recent kernels
      [BUILDROOT] cleanup imx28-usb-downloader package and allows target build also
      [TOOLS] quiltify: use --rebase when pulling from git
      [BUILD] use BR2_LINUX_KERNEL_PATCH (when defined) in Armadeus envt variables
      [BUILDROOT] APF6: add a config to build legacy (Freescale) kernel
      [BUILDROOT] Add some more packages/drivers to apf6legacy config
      [BUILDROOT] 2013.11: Add package to (try to) build python-wx
      [BUILDROOT] APF6: add gpu-vivante-sdk package (examples only tested with framebuffer backend)
      [BUILDROOT] APF6 (legacy): Add Vivante GPU SDK to default config
      [LINUX] 3.10-legacy: Add APF6 Ethernet PHY driver to default configuration
      [LINUX] APF6 (3.10-legacy): Add support for HDMI, USB, SD & ETH to device tree files
      [LINUX] APF9328: 2.6.29: Use PA4 (CSI_D0) as spidev CS (instead of PB18, conflicting with FPGA)
      [AS_DEVICES] as_spi: print error on stderr when spidev device is not valid
      [AS_DEVICES] AsSpi: public methods should be defined explicitly with recent GCC
      [AS_DEVICES] AsSpi: get rid of buggy error detection and remove cut'n pasted stuff
      [AS_DEVICES] as_spi_msg: add comment to explain internals
      [DEMOS] Makes oscillo runs on every LCD resolution
      [TOOLS] apf6_recover: improve user experience with colors and better description :-)
      [LINUX] 3.18: update comments of 0420-armadeus-Add-apf28dev-dts.patch
      [LINUX] 3.18: add comments for 0446-armadeus_add_pm_power_off_function.patch
      [LINUX] 3.18: renames patches 0035, 0076, 0101, 0219, 0230, 0420, 0444 & 0446 (for better understanding)
      [BUILDROOT] all boards: remove some no more needed Linux config symlinks
      [BUILDROOT] apf28: moves Linux 3.4 support to 3.4.105
      [BUILDROOT] apf6: moves Linux 3.14 support to 3.14.27
      [LINUX] all boards: add patches to support 3.19-rc2 (copy of 3.18 one)
      [BUILDROOT] all boards: add Linux configs to support 3.19-rc2 (copy of 3.18 ones)
      [LINUX] apf6: fixes build of kernel 3.19-rc2
      [LINUX] apf6: move to kernel 3.18.1
      [BUILDROOT] apf6: add e4defrag & resize2fs tools to rootfs
      [BUILDROOT] rootfs: also creates apf6-rootfs.ext4 symlink after images generation
      [U-BOOT] 2014.07: apf6: Add a method to update rootfs directly from U-Boot prompt like on others armadeus boards (run update_rootfs)
      [LINUX] apf6: 3.18/3.19: add some drivers for USB<->serial converters in default config
      [LINUX] 2.6.29: Fixes division by zero when lots of processes are created
      [U-BOOT] 2014.07: APF6: add CONFIG_ZERO_BOOTDELAY_CHECK, officialize update_rootfs and cleanup a little the default config
      [BUILDROOT] 2013.11+: add gnuboy package
      [TOOLS] scripts/quiltify.sh: add more info when creating cleanup_buildroot.sh
      [BUILDROOT] Fixes patches/buildroot/2013.11/cleanup_buildroot.sh
      [LINUX] all board: move 3.18 support to 3.18.7
      [BUILDROOT] Transform rxtx armadeus specific package into BR patch
      [BUILDROOT] Transform pci_debug armadeus specific package into BR patch
      [BUILDROOT] Updates tfp410ctrl package definition to BR's state of the art
      [BUILDROOT] Updates ad9889ctrl package definition to BR's state of the art
      [BUILDROOT] Updates ch7024ctrl package definition to BR's state of the art
      [BUILDROOT] Updates max5821ctrl package definition to BR's state of the art
      [BUILDROOT] Updates imxssi armadeus package definition to BR's state of the art
      [BUILDROOT] Updates armadeus testsuite package definition to BR's state of the art
      [FIRMWARE] Rename top_wishbone_example51_lx9.bin to top_wishbone_example_apf51_lx9.bin, to ease firmware non-installation on non-APF51 boards
      [BUILDROOT] 2013.11: Make fw_printenv command work on APF6
      [BUILD] improve Makefile.in to get ARMADEUS_BUSYBOX_VERSION with every BR version
      [U-BOOT] apf6: 2014.07 & 2015.01: add USB keyboard support (not all keyboards seem supported git status)
      [BUILD] Fixes TOPDIR warning when generating armadeus_env.sh
      [BUILDROOT] Fixes testsuite installation on APF28
      [BUILDROOT] Fixes testsuite installation on all APFs
      [U-BOOT] APF6: 2014.07, 2015.01: add mmcboot script and factorize with emmcboot
      [U-BOOT] APF6: merge apf6-u-boot-2015.01.h & apf6-u-boot-2014.07.h again together
      [U-BOOT] APF6: 2014.07, 2015.01: increase console I/O buffer size to avoid hang when printing big envt variables
      [BUILDROOT] apf6legacy_defconfig: add gstreamer + some useful plugins
      [BUILDROOT] Fixes testsuite installation on all APFs (again, sorry :-( )
      [BUILDROOT] 2015.02: Add the possibilty to choose i.MX Librairies version to avoid incompatibility with some kernels
      [LINUX] APF6: 3.10 legacy: add LED heartbeat support
      [LINUX] APF6: 3.10 legacy: Add CPU thermal monitoring support
      [BUILDROOT] 2015.02: apf6legacy: use 3.10.31_1.1.0_beta2 version of i.MX Libraries by default
      [BUILDROOT] convert fpga_firmware package to BR state of the art
      [BUILDROOT] APF27: strace 4.9: fixes build with old kernels
      [BUILDROOT] 2015.02: fixes can-utils build
      [BUILDROOT] 2015.02: APF27: strace 4.9: fixes build with old kernels
      [BUILDROOT] 2015.02: updates cleanup_buildroot.sh
      [BUILDROOT] 2015.02: makes slideshow package build again
      [BUILDROOT] 2015.02: makes apf51test_defconfig build fine
      [BUILDROOT] 2015.02: ltrace can't be used with old kernels anymore
      [BUILDROOT] 2015.02: fixes cleanup_buildroot.sh
      [BUILDROOT] 2015.02: [U-BOOT] 2015.01: fixes build for i.MX28 (mxsimage)
      [BUILDROOT] 2013.11: [U-BOOT] 2015.01: fixes build for i.MX28 (mxsimage)
      [BUILD] Fixes buildauto DL_DIR usage
      [BUILDROOT] homogenize apf6_defconfig and apf6legacy_defconfig
      [LINUX] APF6: 3.10, 3.18, 3.19, 4.0: homogenize default configs
      [TOOLS] Force Bash usage in scripts/export_linux_config.sh
      [LINUX] APF6: 4.0: activates frequency scaling and thermal sensing (experimental)
      [BUILDROOT] 2015.02: allow build of 3.19 kernels and update apfxxmainline_defconfig to 3.19.2 while we are at it
      [BUILDROOT] 2015.02: makes pps_defconfig build again. (sshd user declaration in rootfs skeleton is redundant with BR now)
      [BUILDROOT] homogenize skeleton /etc/shadow & /etc/passwd files with BR 2015.02 state of the art
      [BUILDROOT] Fixes apf9328test_defconfig for BR 2015.02
      [BUILDROOT] 2015.02: fixes apf27xenomai_defconfig build
      [BUILDROOT] 2015.02: fixes gnuboy building
      [BUILDROOT] Updates apf6xenomai_defconfig to linux-3.10.32
      [BUILDROOT] bump apf27xenomaimainline_defconfig to Linux 3.14.33
      [BUILDROOT] apf6*_defconfig: add some useful gstreamer plugins when appropriate and add newt lib to get whiptail tool
      [BUILDROOT] APF6: gstreamer add some useful plugins (RTP, MPEG4 audiodecoding)
      [BUILDROOT] APF6: all defconfigs: add fw_printenv/setenv tool by default
      [BUILDROOT] Homogenize APF6 defconfigs
      [LINUX] APF6: Use stable 3.19.3 as default vanilla kernel
      [BUILDROOT] APF6: all defconfigs: add tools to handle keyboards/keymaps
      [LINUX] APF6: Use stable 3.19.3 as default vanilla kernel (part 2)
      [BUILDROOT] AP6: add fbterm to all defconfigs
      [BUILDROOT] All boards: move to BR 2015.02
      [BUILDROOT] APF28: Forces gcc version to 4.7.x as BR default 4.8 gcc is unable to build a bootable 2.6.35 kernel
      [BUILDROOT] APF6legacy: add a config to build a mediacenter with kodi
      [BUILDROOT] apf6mediacenter: kodi is sexier with sound (=alsa)
      [BUILDROOT] All APF6 defconfigs: add BR2_DL_DIR definition
      [BUILDROOT] Fixes ARMADEUS_DL_DIR (again)
      [BUILDROOT] Also use gcc-4.7 for apf28test_defconfig
      [BUILDROOT] APF27: all defconfigs: gt back to gcc 4.7 as BR default gcc (4.8) doesn't seem able to build bootin U-Boot images
      [TESTS] Enhance serial port test for APF28Dev. Improve comment for USB test on APF28Dev aswell.
      [BUILDROOT] fb-test: fixes tty/virtual console configuration when exiting test
      [BUILDROOT] Replace Boa (no more maintained) with Lighttpd in test configs that can afford it
      [TEST] Python: hide killall errors if python process was already killed
      [TEST] DAC: factorize some code in test script
      [TEST] Framebuffer: fixes test with new fb-test behaviour
      [TEST] GPIO: factorize led-gpios test and use it on APF27 as others will fail due to heartbeat.
      [TEST] Serial: it is a bad idea to use serial port 0 (console) on APF27 in test, so remove it from choices.
      [LINUX] APF51: 2.6.38/3.19/4.0: add support for ext4 filesystem in default configs
      [BUILDROOT] APF51: even if no regression seem visible with gcc 4.8, go back to 4.7 like other APF.
      [TEST] Add test script for lighttpd
      [TEST] Wi-Fi: down eth0 before test to be sure that wlan is used for transfer test + better user instructions.
      [TEST] rs232: add regexpr to find devices and fixes test on APF51
      [TEST] pwm: add better instruction for APF51
      [TEST] gpio: uses gpio-led on APF51 as heartbeat prevent anything else by default
      [TEST] fpga: better user instructions
      [LINUX] APF51: remove no more used apf51test-linux-2.6.38.config
      [BUILDROOT] APF6: add a defconfig for release tests
      [BUILDROOT] APF6: All defconfigs (\!failsafe): Add DOSfstools to check (V)FAT partitions
      [LINUX] APF6: All used configs: allows direct access to multifunction USB disk/keys. Update 3.14 config while we are at it.
      [BUILDROOT] APF6: All defconfigs (\!failsafe): Add tzdata/localtime infos (for Europe)
      [TEST] Updates some release tests for APF6: USB, PWM, RS232, imxregs, mplayer
      [BUILDROOT] Updates demos package to (quite) BR state of the art.
      [LINUX] 4.0: all boards: bump to 4.0.5
      [LINUX] APF27: 4.0: add a config for preempt-rt
      [BUILDROOT] APF27: fixes build of apf27preempt-rtmainline_defconfig
      [BUILDROOT] Fixes build of music_player & show_image demos
      [BUILDROOT] apf27preempt-rtmainline_defconfig: add rt-tests package
      [BUILDROOT] apf6legacy-preempt-rt_defconfig: add rt-tests package
      [BUILDROOT] apf6test_defconfig: bump also to linux 3.19.8
      [LINUX] APF6: 3.19+: desactivate 8bpp support in framebuffer as it doesn't work and may confuse upper layer (like SDL)
      [LINUX] APF6: 3.19+: desactivate 8bpp support in framebuffer as it doesn't work and may confuse upper layer (like SDL)
      [BUILDROOT] Add new APF28 defconfig: apf28mainlinetest (release tests with mainline kernel)
      [BUILDROOT] apf28mainlinetest_defconfig: add madplay
      [LINUX] APF28: 3.9+: add ext4 + USB mass storage & serial gadget support
      [TESTS] Update some release tests for APF28 mainline kernel
      [BUILDROOT] apf6_defconfig & apf6test_defconfig: add Linux image in rootfs /boot/ when generating image
      [BUILDROOT] Beautifying of apf6legacy_defconfig apf6mediacenter_defconfig & apf6xenomai_defconfig
      [U-BOOT] apf6: fixes DTB directory when booting from external MMC/SD (using Buildroot default DTB dir inside rootfs)
      [TEST] Add APF6 support to backlight test
      [TEST] Add APF6 support to test_wifi.sh
      [LINUX] APF6: 3.9+: make mx6_camera driver build as module to prevent some weird messages while modprobing other drivers (see SF ticket #149)
      [BUILDROOT] APF6: Updates failsafe config to default APF6 one
      [BUILDROOT] APF6: failsafe_defconfig: append rootfs to kernel image as initrd
      [BUILDROOT] Add new package apf-config and activate it by default for apf6failsafe_defconfig
      [BUILDROOT] 2015.02: bump openssl to 1.0.2d (mainline backport)
      Fixes buildroot/.gitignore for 2015.02
      [BUILDROOT] 2015.02: install ldd too when using external toolchains
      [BUILDROOT] APF6: all defconfigs: add apf-config tool
      [BUILDROOT] post_build.sh: if kernel image is installed in /boot rootfs directory, then create a symlink apfxx-linux.bin for it, to be usable from U-Boot.
      [U-BOOT] APF6: 2014.07+: Add initargs script to factorize bootargs initialization
      [U-BOOT] APF6: 2014.07+: use fdt_addr in download_dtb instead of loadaddr (also used by download_kernel) to ease RAM boot of kernel. Adapt flash_dtb aswell.
      [U-BOOT] APF6: 2014.07+: add ramboot script to ease linux+ramdisk boot
      [U-BOOT] APF6: 2014.07+: flash_firmware script is loading firmware not flashing it, so rename it.
      [U-BOOT] APF6: 2014.07+: makes kernel image name configurable ('kernelimg' variable) and default it to classic apf6-linux.bin
      [BUILDROOT] Introduces 2 new image files: boot.ext4 and user_data.ext4, for platforms with eMMC, like the APF6. This way, eMMC recover from U-Boot is eased.
      [BUILDROOT] apf6/genimage.cfg: fixes boot partition offset in eMMC
      [BUILDROOT] post_build.sh: when existing create a dtbs/ symlink in boot filesystem to be compatible with pre-6.0 U-Boots
      [BUILDROOT] bump apf-config version
      [BUILDROOT] APF6: all defconfigs: add host-genimage package to build new .ext4 images
      [U-BOOT] 2014.07+: APF6: fixes rootfs partition offset in eMMC
      [U-BOOT] 2014.07+: APF6: add a script to update whole Boot partition (update_boot). Adapt dtb/kernel updating messages.
      [U-BOOT] 2014.07+: APF6: add a script to update whole eMMC User Data partition (update_userdata)
      [U-BOOT] 2014.07+: APF6: add a script to (partially) erase eMMC User Data partition (erase_userdata).
      [U-BOOT] 2014.07+: APF6: remove the usage of dtbs/ directory to store .dtb files, to be similar with other APF boards
      [BUILDROOT] APF6: all defconfig: add pv and host-e2tools packages
      [BUILDROOT] APF6: generate a new image for SD/MMC only usage (rootfs-for-sd.ext4) and cleanup /boot directory of eMMC's rootfs image
      Fixes some more .gitignore for BR 2015.02
      [BUILDROOT] Fixes 026-armadeus-install-ldd-with-external-toolchains.patch
      [BUILDROOT] e2rm usage to remove stuff in /boot of rootfs.ext4 image seems not very ext4 friendly, so hold on this feature for upcoming 6.0 release
      [BUILDROOT] Bump apf-config version
      [U-BOOT] 2014.07+: APF6: add a script to (partially) erase rootfs partition content (only for test for the moment)
      [LINUX] APF6: 3.14.29 -> 3.14.48, 3.18.7 -> 3.18.19, 4.0.5 -> 4.0.9
      [TOOLS] uboot_recover: add 'BLINK' color
      [TOOLS] uboot_recover: APF6: warn user about U-Boot update might be needed after recovery
      [U-BOOT] 2014.07+: APF6: really clear 10MB in run erase_rootfs
      [BUILDROOT] Fixes mke2img options when building boot.ext4, to avoid U-Boot errors when doing update_kernel after update_boot
      Updates Changelog and /etc/armadeus-version for 6.0 release
      [BUILDROOT] APF6: all defconfigs: give a volume name (ROOTFS) to rootfs.ext4 image)
      [U-BOOT] APF6: 2014.07+: set APF6 eMMC boot partition size to 48Mbytes and not 24. Updates related tools accordingly.
      Updates Changelog for 6.0 release (2nd try)

Nicolas Colombain (11):
      [LINUX] fix micron nand support for apf28i
      [UBOOT] fix apf51 random crashes during startup
      Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
      [uboot] complete fix concerning random crashes during startup
      [UBOOT] add apf6 fpga initial support
      [UBOOT] add apf6 fpga initial support
      Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
      [LINUX] add APF6 fpgaloader first version
      Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
      [LINUX] add apf6SP support to load_fpga
      [UBOOT] fix error in 128MB DDR parameters

Philippe Reynes (190):
      [BUILDROOT] linux: use tar.xz instead of tar.bz2
      [LINUX] 3.13: move to 3.13-rc7
      [LINUX] 3.10: move to 3.10.26
      [LINUX] 3.12: move to 3.12.7
      [LINUX] 3.13: move to 3.13-rc8
      [LINUX] 3.12: move to 3.12.8
      [LINUX] 3.10: move to 3.10.27
      [LINUX] 3.13: move to 3.13
      [LINUX] 3.12: move to 3.12.9
      [LINUX] 3.10: move to 3.10.28
      [LINUX] 3.13: move to 3.13.1
      [LINUX] 3.13: move to 3.13.2
      [LINUX] 3.11: remove support of 3.11.2, 3.11.3 and 3.11.7
      [LINUX] 3.12: remove support of 3.12.1 and 3.12.2
      [LINUX] 3.10: move to 3.10.29
      [LINUX] 3.11: move to 3.11.10 (EOL)
      [LINUX] 3.12: move to 3.12.10
      [LINUX] 3.14: move to 3.14-rc2
      [LINUX] 3.10: move to 3.10.30
      [LINUX] 3.12: move to 3.12.11
      [LINUX] 3.13: move to 3.13.3
      [LINUX] 3.10: move to 3.10.31
      [LINUX] 3.12: move to 3.12.12
      [LINUX] 3.13: move to 3.13.4
      [LINUX] 3.10: move to 3.10.32
      [LINUX] 3.12: move to 3.12.13
      [LINUX] 3.13: move to 3.13.5
      [LINUX] apf27: move to 3.14-rc4
      [LINUX] apf28: remove useless configuration for 3.14-rc2
      [LINUX] 3.10: move to 3.10.33
      [LINUX] 3.13: move to 3.13.6
      [LINUX] 3.12: move to 3.12.14
      [LINUX] 3.14: move to 3.14-rc6
      [LINUX] 3.4: remove useless link 3.4.6
      [LINUX] 3.10: move to 3.10.34
      [LINUX] 3.13: move to 3.13.7
      [LINUX] 3.14: move to 3.14-rc8
      [LINUX] 3.12: move to 3.12.15
      [LINUX] 3.14: move to stable 3.14 (remove 3.14-rc8)
      [LINUX] 3.13: move to 3.13.8
      [LINUX] 3.13: move to 3.13.9
      [LINUX] 3.12: move to 3.12.16
      [LINUX] 3.10: move to 3.10.36
      [LINUX] 3.12: move to 3.12.17
      [LINUX] 3.14: move to 3.14.1
      [LINUX] 3.13: move to 3.13.10
      [LINUX] 3.10: move to 3.10.37
      [LINUX] 3.15: move to 3.15-rc2
      [LINUX] 3.13: move to 3.13.11
      [LINUX] 3.12: move to 3.12.18
      [LINUX] 3.14: move to 3.14.2
      [BUILDROOT] Add a config for mainline xenomai on APF27
      [LINUX] 3.15: move to 3.15-rc3
      [LINUX] 3.10: move to 3.10.38
      [LINUX] 3.14: move to 3.14.3
      [LINUX] 3.10: move to 3.10.39
      [LINUX] 3.12: move to 3.12.19
      [LINUX] 3.15: move to 3.15-rc5
      [LINUX] 3.10: move to 3.10.40
      [LINUX] 3.14: move to 3.14.4
      [LINUX] 3.12: move to 3.12.20
      [LINUX] 3.14: move to 3.14.5
      [LINUX] 3.10: move to 3.10.41
      [LINUX] 3.12: move to 3.12.21
      [LINUX] 3.10: move to 3.10.42
      [LINUX] 3.14: move to 3.14.6
      [LINUX] 3.10: move to 3.10.45
      [LINUX] 3.12: move to 3.12.23
      [LINUX] 3.14: move to 3.14.9
      [LINUX] 3.15: move to 3.15.2
      [LINUX] pod_gpio: fix compilation by adding module.h
      [LINUX] 3.10: move to 3.10.47
      [LINUX] 3.12: move to 3.12.24
      [LINUX] 3.14: move to 3.14.11
      [LINUX] 3.15: move to 3.15.4
      [LINUX] 3.15: disable usb
      [LINUX] 3.10: move to 3.10.48
      [LINUX] 3.14: move to 3.14.12
      [LINUX] 3.15: move to 3.15.5
      [LINUX] 3.10: move to 3.10.49
      [LINUX] 3.14: move to 3.14.13
      [LINUX] 3.15: move to 3.15.6
      [LINUX] 3.12: move to 3.12.25
      [LINUX] 3.16: move to 3.16-rc5
      [LINUX] 3.10: move to 3.10.50
      [LINUX] 3.14: move to 3.14.14
      [LINUX] 3.15: move to 3.15.7
      [LINUX] 3.10: move to 3.10.51
      [LINUX] 3.14: move to 3.14.15
      [LINUX] 3.15: move to 3.15.8
      [LINUX] 3.12: move to 3.12.26
      [LINUX] 3.10: move to 3.10.52
      [LINUX] 3.14: move to 3.14.16
      [LINUX] 3.15: move to 3.15.9
      [LINUX] 3.10: move to 3.10.53
      [LINUX] 3.14: move to 3.14.17
      [LINUX] 3.15: move to 3.15.10
      [LINUX] 3.16: move to 3.16.1
      xilinx-fpga-loader: fix compilation for 3.17
      [LINUX] 3.17: add initial support of 3.17-rc1
      [LINUX] 3.17: move to 3.17-rc2
      [LINUX] apf27: fix linux config file on xenomai mainline configuration
      [LINUX] 3.17: move to 3.17-rc3
      [LINUX] 3.12: move to 3.12.27
      [LINUX] 3.10: move to 3.10.54
      [LINUX] 3.14: move to 3.14.18
      [LINUX] 3.16: move to 3.16.2
      [LINUX] 3.12: move to 3.12.28
      [LINUX] 3.17: move to 3.17-rc4
      [LINUX] 3.17: move to 3.17-rc5
      [LINUX]  3.10: move to 3.10.55
      [LINUX] 3.14: move to 3.14.19
      [LINUX] 3.16: move to 3.16.3
      [LINUX] 3.17: move to 3.17-rc6
      [LINUX] 3.17: move to 3.17-rc7
      [LINUX] 3.12: move to 3.12.29
      [LINUX] 3.17: move to 3.17
      [LINUX] 3.16: move to 3.16.4
      [LINUX] 3.14: move to 3.14.20
      [LINUX] 3.12: move to 3.12.30
      [LINUX] 3.10: move to 3.10.56
      [LINUX] 3.10: move to 3.10.57
      [LINUX] 3.16: move to 3.16.5
      [LINUX] 3.14: move to 3.14.21
      [LINUX] 3.17: move to 3.17.1
      [LINUX] 3.16: move to 3.16.6
      [LINUX] 3.14: move to 3.14.22
      [LINUX] 3.10: move to 3.10.58
      [LINUX] 3.18: add initial support of 3.18-rc1
      [LINUX] 3.10: move to 3.10.59
      [LINUX] 3.12: move to 3.12.31
      [LINUX] 3.14: move to 3.14.23
      [LINUX] 3.16: move to 3.16.7
      [LINUX] 3.17: move to 3.17.2
      [LINUX] 3.10: move to 3.10.60
      [LINUX] 3.12: move to 3.12.32
      [LINUX] 3.14: move to 3.14.24
      [LINUX] 3.17: update to 3.17.3
      [LINUX] 3.10: move to 3.10.61
      [LINUX] 3.12: move to 3.12.33
      [LINUX] 3.14: move to 3.14.25
      [LINUX] 3.17: move to 3.17.4
      [LINUX] 3.10: move to 3.10.62
      [LINUX] 3.12: move to 3.12.35
      [LINUX] 3.14: move to 3.14.26
      [LINUX] 3.17: move to 3.17.6
      [LINUX] 3.10: move to 3.10.63
      [LINUX] 3.14: move to 3.14.27
      [LINUX] 3.17: move to 3.17.7
      [LINUX] 3.18: move to 3.18.1
      [LINUX] apf27/28/51: 3.10: move to 3.10.64
      [LINUX] apf6/51/27/28: 3.14: move to 3.14.28
      [LINUX] apf27/28/51: 3.17: move to 3.17.8
      3.10: move to 3.10.65
      3.12: move to 3.12.36
      [LINUX] 3.14: apf27/28/51/6: move to 3.14.29
      [LINUX] 3.10: move to 3.10.66
      [LINUX] 3.14: move to 3.14.31
      [LINUX] 3.18: move to 3.18.5
      [LINUX] 3.10: move to 3.10.67
      [LINUX] 3.12: move to 3.12.37
      [LINUX] 3.10: move to 3.10.69
      [LINUX] 3.14: move to 3.14.33
      3.10: move to 3.10.71
      3.12: move to 3.12.38
      3.14: move to 3.14.35
      3.18: move to 3.18.9
      3.19: move to 3.19.1
      [LINUX] 3.10: move to 3.10.72
      [LINUX]  3.12: move to 3.12.39
      [LINUX] 3.14: move to 3.14.36
      [LINUX] 3.10: move to 3.10.73
      [LINUX] 3.14: move to 3.14.37
      [LINUX] 3.18: move to 3.18.10
      [LINUX] 3.12: move to 3.12.40
      [LINUX] 3.18: move to 3.18.11
      [LINUX] 3.10: move to 3.10.78
      [LINUX] 3.12: move to 3.12.42
      [LINUX] 3.14: move to 3.14.42
      [LINUX] 3.18: move to 3.18.13
      [LINUX] 3.19: move to 3.19.8
      [LINUX] apf6: move to 3.19.8
      [LINUX] APF27: apf27xenomaimainline: bump kernel to 3.14.39-arm-9
      [BUILDROOT] 2015.02: backport patches from mainline to support linux headers 4.x
      3.10: move to 3.10.84
      3.12: move to 3.12.45
      3.14: move to 3.14.48
      3.18: move to 3.18.19
      4.0: move to 4.0.9
      4.0-rt: move to 4.0.8-rt6

Sebastien Royen (5):
      [LINUX] 3.16: log imx2 watchdog bootstatus at probe
      [LINUX] 3.11: log imx2 watchdog bootstatus at probe
      [LINUX] 3.17: log imx2 watchdog bootstatus at probe
      [BUILDROOT] mainline move to kernel 3.16.2
      [buildroot] add some python packages and nss-pam-ldapd

Sébastien Szymanski (211):
      [LINUX] 3.12: apf51: dts: add bluetooth support.
      [LINUX] 3.13: apf51: dts: add bluetooth support.
      [LINUX] 3.12: apf6q: usefull patches for imx6.
      [BUILDROOT] add mmc-utils package.
      [LINUX] 3.12: apf6q: fix mmc driver to be able to enable emmc boot
      [LINUX] 3.12: add author name and details on patch 0480.
      [BUILDROOT] mmc-utils: add largefile dependency
      [LINUX] 3.12: dts: add GSM, GPS, User button and User led
      [LINUX] 3.12: apf6q: add wifi and bluetooth to device tree
      [BUILDROOT] apf6q: move to linux 3.13-rc8
      [LINUX] 3.13: apf6q: add pcie to device tree.
      [LINUX] 3.13: apf6q: this patch fixes a lockdep warning
      [LINUX] 3.13: apf6q: add author and details on patch 0481
      [BUILDROOT] apf6q: add linux default config file
      [BUILDROOT] apf6q: rename linux default config file and a symlink to it
      [BUILDROOT] apf6q: move to linux 3.13
      [LINUX] 3.13: apf6q: add usb otg to device tree
      [LINUX] 3.13: apf6q: enable watchdog nowayout option in default config
      [LINUX] 3.13: apf6q: split device tree in two file: imx6-apf6.dtsi and
      [LINUX] 3.13: apf6q: add PWM3 to device tree
      [LINUX] imx6q: apf6: move pwm3 node from apf6 device tree to apf6dev device tree.
      [LINUX] 3.13: apf6q: add bluetooth drivers to default linux config file
      [BUILDROOT] apf6q: add bluez to default config file.
      [LINUX] 3.13: apf6q: add HCILL protocol support.
      [BUILDROOT] apf6: add wireless drivers to default linux config file.
      [LINUX] 3.13: apf6: split device trees and add apf6dl device tree.
      [LINUX] 3.13: apf6: add device tree support to wl12xx drivers. These
      [BUILDROOT] apf6: enable CONFIG_NL80211_TESTMODE and CONFIG_CFG80211_WEXT by
      [LINUX] 3.13: apf6: add wifi to device tree.
      [LINUX]: apf6q: move to 3.14-rc1
      [BUILDROOT] apf6: make buildroot and linux default config files common
      [BUILDROOT] apf6: move to linux 3.14-rc2
      [BUILDROOT] apf6: Fix CONFIG_CMDLINE default value.
      [LINUX] 3.14: mmc: sdhci: a few fixes on timeout and max_discard_to
      [BUILDROOT] apf6: add apf6failsafe_defconfig
      [LINUX] 3.14: apf6: add WL_EN and BT_EN muxing to device tree
      [BUILDROOT] 2013.11: qt: move to version 4.8.5
      [BUILDROOT] apf6: move to linux 3.14-rc3
      [BUILD] Fix Qt version detection to set ARMADEUS_QT_VERSION variable.
      [LINUX] 3.14-rc3: apf6: move fec node from apf6dev device tree to apf6
      [LINUX] 3.14-rc3: apf6: add aliases for can interfaces
      [LINUX] 3.14-rc3: apf6 config: enable CAN Bus
      [LINUX] 3.14-rc3: apf6: dts: enable CAN Bus
      [LINUX] 3.14: apf6 config: add AT803x PHYs support
      [LINUX] 3.14-rc3: apf6: dts: enable SPI
      [LINUX] 3.14-rc3: apf6: dts: add reset gpio to fec node
      [LINUX] 3.14: apf6 config: enable CONFIG_MMC_UNSAFE_RESUME
      [LINUX] 3.14: apf6: move to linux 3.14-rc4
      Revert "[LINUX] 3.14-rc3: apf6: dts: add reset gpio to fec node"
      [BUILDROOT] 2013.11: toolchain-external: add Sourcery ARM 2013.11,
      [BUILDROOT] apf6: move to Sourcery CodeBench ARM 2013.11 toolchain
      [LINUX] 3.14-rc4: apf28dev: otg: add PIN ID muxing.
      [LINUX] apf28dev: add linux 3.14-rc4 config file.
      [LINUX] 3.14-rc4: apf28dev: fix touchscreen statemachine
      [LINUX] apf28: move to linux 3.14-rc5
      [LINUX] 3.13: apf28: use symlink for 3.13.5 config
      [LINUX] 3.13: apf27 and apf51: use symlink for 3.13.5 config
      [LINUX] 3.13: move to 3.14-rc7
      [TEST SUITE] test_ethernet.sh: Pass the iterface name to test as second argument
      [TEST] apf28: fix tty name when kernel is not 2.6.35.3
      [LINUX] apf6: move to 3.14
      [LINUX] 3.14: apf28: add pm_power_off function
      [LINUX] 3.14: apf6: add driver for rtc and touchscreen controller.
      [LINUX] 3.14: apf6: dts: update device trees
      [LINUX] 3.15: add 3.15-rc1
      [LINUX] apf6: move to 3.15-rc2
      [LINUX] 3.15: apf6: dts: fix pinctrl of uart4
      [BUILDROOT] 2013.11: imagemagick bump to version 6.8.9-0
      [LINUX] apf6: move to linux 3.15-rc3
      [LINUX] apf6: move to linux 3.15-rc4
      [LINUX] 3.15: move to 3.15-rc4
      [LINUX] 3.15: apf6: move to 3.15-rc5
      [LINUX] 3.15: dts: apf6: Few fixes in devicetrees
      [LINUX] 3.15: move to 3.15-rc6
      [LINUX] 3.15: move to 3.15-rc7
      [LINUX] 3.15: move to 3.15-rc8.
      [LINUX] 3.15: apf6: dts: fix gsm muxing and add gpios node
      [LINUX] 3.15: move to 3.15
      [LINUX] 3.16: add linux 3.16-rc2
      [LINUX] 3.16: apf6: move to linux 3.16-rc2
      [UBOOT] 2014.07: add preliminary apf6 support.
      [LINUX] 3.16: apf6: move to linux 3.16-rc5
      [LINUX] 3.16: apf6: fix a hard machine hang.
      [LINUX] 3.1{5,6}: apf28: move the usb0 id pin muxing node at the right
      [BUILDROOT] apf6: move to kernel 3.16-rc7
      [LINUX] 3.16: enable IPUv3 driver
      [LINUX] 3.16: apf51: enable IPUv3 driver
      [LINUX] 3.1{5,6}: apf51: remove patch 0412
      [LINUX] 3.16: apf51: dts: rework dts files for apf51 v2 module.
      [LINUX] 3.16: apf51: add MC13892 touchscreen support.
      [LINUX] 3.16: apf51: enable MC13892 PMIC drivers
      [LINUX] move to kernel 3.16
      [LINUX] apf51-v2: 3.16: dts: add gpo2 and gpo3
      [U-BOOT] 2014.07: apf6: fix ethernet.
      [LINUX] 3.16: apf6: dts: fix ethernet pin muxing.
      [SCRIPTS] quiltify.sh: add a no build option
      [LINUX] APF6 (3.10-legacy): fix ethernet pin muxing
      [LINUX] 3.10.mx6_legacy: apf6: dts: remove phy-reset-gpios
      [LINUX] 3.16: apf6: dts: set proper ethernet phy reset duration (10ms)
      [LINUX] 3.16: apf51: dts: rename imx51-apf51dev-v1.dts to imx51-apf51dev.dts
      [UBOOT] 2014.07: apf6: seek uboot image in boot partition.
      [LINUX] 3.17: copy patch 0506-armadeus-change_mmc_numbering.patch from linux 3.16
      [LINUX] 3.17: move APF6 to linux 3.17
      [UBOOT] 2014.07: apf6: useful commands, usb and usb gadget support
      [LINUX] 3.17: apf6: add patches to have a working pcie.
      [BUILDROOT] 2013.11: apf6: update linaro toolchain.
      [BUILDROOT] apf6: add some useful packages by default.
      [BUILDROOT] APF6: add iperf and gzip (used by update-pciis) to default
      [UBOOT] 2014.07: apf6: add pcie support
      [UBOOT] 2014.07: apf6: fix update_uboot command and don't give ip args
      [BUILDROOT] 2013.11: bump linaro toolchain to 2014.09
      [LINUX] 3.17: apf6: update default config file
      [LINUX] add Linux 3.18-rc1
      [LINUX] apf6: move to linux 3.18-rc1
      [BUILDROOT] apf6: remove imx and gpu libraries from default config
      [BUILDROOT] Remove U-Boot hooks (post_configure and post_install_images) for the apf6 board
      [LINUX] 3.18: apf6: move to 3.18-rc2
      [BUILDROOT] apf6: use Armadeus skeleton
      [TESTS] Update a few tests to make them work on APF6
      [BUILDROOT] Create /etc/machine file in post_build.sh
      [BUILDROOT] apf6: Use BR2_CPU_NAME to disable U-BOOT hooks
      [LINUX] 3.18: move to 3.18-rc3
      [BUILDROOT] apf6: Create apf6-u-boot.img symlink to u-boot.img image
      [LINUX] 3.18: apf6: move to 3.18-rc3
      [LINUX] apf51: fix linux 3.1{6,7,8} config files
      [LINUX] 3.18: apf6: fix user key definition in dts
      [LINUX] 3.18: apf6: config file minor updates
      [LINUX] 3.18: move to 3.18-rc4
      [LINUX] 3.18: move to 3.18-rc5
      [LINUX] 3.1{7,8}: apf{51,6}: fix pixel clock polarity.
      [LINUX] 3.18: apf6: add wandcam support.
      [LINUX] 3.18: apf6: dts: set wifi chip as non-removable
      [BUILDROOT] Update cleanup_buildroot.sh and update it automatically.
      [BUILDROOT] Remove unused ARMADEUS_SDL_DIR and ARMADEUS_XENOMAI_DIR
      [BUILDROOT] Add ARMADEUS_TOOLCHAIN_PREFIX env var and make demos compile
      [LINUX] 2.6.38: apf51v2: add MC13892 PMIC support
      [LINUX] 2.6.38: apf51v2: move mc13892's gpo lines in a gpio driver
      [BUILDROOT] Update buildroot patches for BR 2014.11
      [LINUX] 3.18: move to 3.18-rc7
      [LINUX] 2.6.38: apf51v2: enable MC13892 PMIC
      [BUILDROOT] move imx-usb-loader in buildroot package directory
      [SOFTWARE] apf6: add uboot recovery script
      [LINUX] 3.18: move to 3.18
      [BUILDROOT] 201{3,4}.11: fix imx-usb-loader build
      [U-BOOT] 2014.07: use mmcpart and mmcdev vars in flash_kernel and
      [UBOOT] 2014.07: apf6: enable hdmi, netconsole and fix OTG pin ID
      [LINUX] 3.19: move to 3.19-rc3
      [LINUX] 3.19: move to 3.19-rc4
      [LINUX] 2.6.38: apf51v2: add ADC of MC13892 PMIC support
      [LINUX] 2.6.38: apf51v2: add button of PMIC MC13892 support
      [LINUX] 2.6.38: apf51: add pm_power_off function
      [LINUX] 3.18: move to 3.18.2
      [LINUX] 3.1{8,9}: apf28: dts: add CAN support
      [LINUX] 3.1{8,9}: apf28: dts: enable UART0
      [LINUX] 3.19: move to 3.19-rc5
      [LINUX] 3.18: move to 3.18.3
      [SCRIPT] quiltify.sh: do not try to delete or remove target dir if it does
      [SCRIPT] quiltify.sh: do not try to delete or remove target dir if
      [AS_DEVICES] as_led: Fix comment and Armadeus name
      [LINUX] APF6 (legacy): update
      [LINUX] 3.19: move to 3.19
      [UBOOT] 2014.07: apf6: don't use env vars in bootstrap
      [BUILDROOT] Update buildroot patches for BR 2015.02
      [BUILDROOT] 2015.02: fix patches 017 and 018
      [BUILDROOT] add lib and usr/lib dirs to rootfs skeleton.
      [BUILDROOT] 2015.02: fix patch 221
      [BUILDROOT] 2013.11: bump busybox to 1.23.1
      [U-BOOT] 2014.07: rework dtb handling
      [BUILDROOT] 2015.02: move to 2015.02-rc3
      [BUILDROOT] 2013.11/2015.02: linux: add support for 4.x versions
      [LINUX] apf6: add linux 4.0-rc1 support
      [BUILDROOT] 2015.02: add 2015.02 support
      [BUILDROOT] Remove 2014.11 patches
      [BUILDROOT] apf6legacy_defconfig: set i.MX6 as default platform for
      [BUILDROOT] apf6legacy_defconfig: add host imx-usb-loader package
      [BUILDROOT] 2013.11: fix can-utils repository url
      [BUILDROOT] cleanup buildroot/target/device/armadeus/Makefile.in
      [BUILDROOT] 2015.02: remove linux patches hook, use a BR patch instead
      [BUILDROOT] 2015.02: APF28: strace 4.9: fixes build with old kernels
      [SCRIPTS] quiltify.sh: add LC_ALL=C to sort command
      [BUILDROOT] 2015.02: fix apf28test_defconfig build
      [BUILDROOT] 2013.11: remove linux patches hook, use a BR patch instead
      [BUILDROOT] 2015.02/2013.11: linux: stop if one linux patch doesn't
      [LINUX] 3.10.mx6_legacy: add LCD support
      [LINUX] 3.10.mx6_legacy: fix default_ifmt value in lcd node
      [LINUX] 3.19/4.0: apf6: dts: Update some muxing configs...
      [BUILDROOT] 2015.02: openssl bump to version 1.0.2a
      [BUILDROOT] package: pppd: fix url
      [LINUX] 3.10 (legacy): apf6: dts: Update some muxing configs..
      [LINUX] apf6 legacy: backport touchscreen driver
      [BUILDROOT] 2015.02: mmc-utils: bump to latest commit
      [LINUX] 3.19: apf6: enable sata_ref_100M clock.
      [DEBUG] imxregs: add apf6 support
      [LINUX] 3.19: apf6: dts: add uart5
      [LINUX] 3.19: apf6: dts: add lcd backlight
      [LINUX] 3.10 (legacy): apf6: dts: add backlight and uart5
      [LINUX] 4.0: apf6: dts: add backlight and uart5
      [BUILDROOT] apf6 (legacy): add linux preempt rt config
      [LINUX] apf6 (legacy): add support for eMMC 5.0
      [LINUX] apf6 (legacy): add PCIe support (backport PCIe driver from 3.14)
      [LINUX] apf6 (legacy): add Armadeus drivers
      [LINUX] apf6 (legacy): fix fpgaloader building.
      [LINUX] apf6 (legacy): do not change PCIe clock frequency
      [BUILDROOT] openssl: bump to version 1.0.2c
      [DEMOS] pcie_msi: use Armadeus vars
      [LINUX] 3.19/4.0: apf28: add Tianma TM035 support
      [BUILDROOT] 2015.02: owfs: bump to latest version
      [BUILDROOT] 2015.02: libpng: bump to version 1.6.17
      [BUILDROOT] APF6: defconfig: add iproute2 package
      [BUILDROOT] APF6: apf6legacy_defconfig: add iproute2 package
      [BUILDROOT] post_build.sh: add -n option when creating dtbs symlink

Yvan Roch (1):
      [LINUX] 3.12.6: APF27: Touchscreen tsc210x: support with device tree

-----------------------------------------------------------------------


hooks/post-receive
-- 
armadeus