[Armadeus-commitlog] armadeus branch, master, updated. armadeus-5.3-280-g66eaf06

[jorasse <jo...@us...>]

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "armadeus".

The branch, master has been updated
       via  66eaf06a5578596bed1a657768b6e5054fd5b6f8 (commit)
      from  fddab1c0e77239099c8f24c939a3877e4ec34a2f (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit 66eaf06a5578596bed1a657768b6e5054fd5b6f8
Author: Eric Jarrige <eri...@ar...>
Date:   Mon Jun 16 14:42:05 2014 +0200

    [UBOOT] 2014.04: pps27: add board configuration

-----------------------------------------------------------------------

Summary of changes:
 .../device/armadeus/pps/pps-u-boot-2014.04.h       |  939 ++++++++++++++++++++
 1 files changed, 939 insertions(+), 0 deletions(-)
 create mode 100644 buildroot/target/device/armadeus/pps/pps-u-boot-2014.04.h

diff --git a/buildroot/target/device/armadeus/pps/pps-u-boot-2014.04.h b/buildroot/target/device/armadeus/pps/pps-u-boot-2014.04.h
new file mode 100644
index 0000000..8a5d811
--- /dev/null
+++ b/buildroot/target/device/armadeus/pps/pps-u-boot-2014.04.h
@@ -0,0 +1,939 @@
+/*
+ *
+ * Configuration settings for the Armadeus Project motherboard PPS27
+ *
+ * Copyright (C) 2008-2014 Eric Jarrige <eri...@ar...>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_ENV_VERSION 	12
+#define CONFIG_IDENT_STRING	" pps patch 3.20"
+#define CONFIG_BOARD_NAME	pps
+#define CONFIG_SYS_GENERIC_BOARD
+#define __APF27_H	/* force overide apf27.h defines */
+
+/*
+ * SoC configurations
+ */
+#define CONFIG_ARM926EJS		/* this is an ARM926EJS CPU */
+#define CONFIG_MX27			/* in a Freescale i.MX27 Chip */
+#define CONFIG_MACH_TYPE	1698	/* APF27 */
+
+/*
+ * Enable the call to miscellaneous platform dependent initialization.
+ */
+#define CONFIG_SYS_NO_FLASH	/* to be define before <config_cmd_default.h> */
+
+/*
+ * Board display option
+ */
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_DISPLAY_CPUINFO
+
+/*
+ * SPL
+ */
+/* Copy SPL+U-Boot here	     */
+#define CONFIG_SPL
+#define CONFIG_SPL_TARGET	"u-boot-with-spl.bin"
+#define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
+#define CONFIG_SPL_MAX_SIZE	2048
+#define CONFIG_SPL_TEXT_BASE    0xA0000000
+
+/* NAND boot config */
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x800
+#define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	CONFIG_SYS_MONITOR_LEN - 0x800
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+
+#define CONFIG_HOSTNAME	CONFIG_BOARD_NAME
+#define CONFIG_ROOTPATH	"/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root"
+
+/*
+ * U-Boot Commands
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV	/* ask for env variable		*/
+#define CONFIG_CMD_BSP		/* Board Specific functions	*/
+#define CONFIG_CMD_CACHE	/* icache, dcache		*/
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP		/* DHCP Support			*/
+#define CONFIG_CMD_DNS
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT		/* FAT support			*/
+#define CONFIG_CMD_IMX_FUSE	/* imx iim fuse                 */
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII		/* MII support			*/
+/*#define CONFIG_CMD_MMC*/
+#define CONFIG_CMD_MTDPARTS	/* MTD partition support	*/
+#define CONFIG_CMD_NAND		/* NAND support			*/
+#define CONFIG_CMD_NAND_LOCK_UNLOCK
+#define CONFIG_CMD_NAND_TRIMFFS
+#define CONFIG_CMD_NFS		/* NFS support			*/
+#define CONFIG_CMD_PING		/* ping support			*/
+#define CONFIG_CMD_SETEXPR	/* setexpr support		*/
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+
+/*
+ * Memory configurations
+ */
+#define CONFIG_NR_DRAM_POPULATED 1
+#define CONFIG_NR_DRAM_BANKS	2
+
+#define ACFG_SDRAM_MBYTE_SYZE 64
+
+#define PHYS_SDRAM_1			0xA0000000
+#define PHYS_SDRAM_2			0xB0000000
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (2 * 1024 * 1024))
+#define CONFIG_SYS_MEMTEST_START	0xA0000000	/* memtest test area  */
+#define CONFIG_SYS_MEMTEST_END		0xA0300000	/* 3 MiB RAM test */
+
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_SDRAM_BASE	\
+		+ PHYS_SDRAM_1_SIZE - 0x0100000)
+
+#define CONFIG_SYS_TEXT_BASE		0xA0000800
+
+/*
+ * FLASH organization
+ */
+#define	ACFG_MONITOR_OFFSET		0x00000000
+#define	CONFIG_SYS_MONITOR_LEN		0x00100000	/* 1MiB */
+#define CONFIG_ENV_IS_IN_NAND
+#define	CONFIG_ENV_OVERWRITE
+#define	CONFIG_ENV_OFFSET		0x00100000	/* NAND offset */
+#define	CONFIG_ENV_SIZE			0x00020000	/* 128kB  */
+#define CONFIG_ENV_RANGE		0X00080000	/* 512kB */
+#define	CONFIG_ENV_OFFSET_REDUND	\
+		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)	/* +512kB */
+#define	CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE	/* 512kB */
+#define	CONFIG_FIRMWARE_OFFSET		0x00200000
+#define	CONFIG_FIRMWARE_SIZE		0x00080000	/* 512kB  */
+#define	CONFIG_KERNEL_OFFSET		0x00300000
+#define	CONFIG_ROOTFS_OFFSET		0x00800000
+
+#define CONFIG_MTDMAP			"mxc_nand.0"
+#define MTDIDS_DEFAULT			"nand0=" CONFIG_MTDMAP
+#define MTDPARTS_DEFAULT	"mtdparts=" CONFIG_MTDMAP \
+				":1M(u-boot)ro," \
+				"512K(env)," \
+				"512K(env2)," \
+				"512K(firmware)," \
+				"512K(dtb)," \
+				"5M(kernel)," \
+				"-(rootfs)"
+
+/*
+ * U-Boot general configurations
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT		"BIOS> "	/* prompt string */
+#define CONFIG_SYS_CBSIZE		2048		/* console I/O buffer */
+#define CONFIG_SYS_PBSIZE		\
+				(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+						/* Print buffer size */
+#define CONFIG_SYS_MAXARGS		16		/* max command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+						/* Boot argument buffer size */
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_HUSH_PARSER			/* enable the "hush" shell */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "	/* secondary prompt string */
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_PREBOOT			"run check_flash checknload_firmware " \
+					"check_env ;"
+
+
+/*
+ * Boot Linux
+ */
+#define CONFIG_CMDLINE_TAG		/* send commandline to Kernel	*/
+#define CONFIG_SETUP_MEMORY_TAGS	/* send memory definition to kernel */
+#define CONFIG_INITRD_TAG		/* send initrd params	*/
+
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_BOOTDELAY	1
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define	CONFIG_BOOTFILE		__stringify(CONFIG_BOARD_NAME) "-linux.bin"
+#define CONFIG_BOOTARGS		"console=" __stringify(ACFG_CONSOLE_DEV) "," \
+			__stringify(CONFIG_BAUDRATE) " " MTDPARTS_DEFAULT \
+			" ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs "
+
+#define ACFG_CONSOLE_DEV	ttySMX0
+#define CONFIG_BOOTCOMMAND	"run ubifsboot"
+#define CONFIG_SYS_AUTOLOAD	"no"
+/*
+ * Default load address for user programs and kernel
+ */
+#define CONFIG_LOADADDR			0xA0000000
+#define	CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+/*
+ * Extra Environments
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"env_version="		__stringify(CONFIG_ENV_VERSION)		"\0" \
+	"consoledev="		__stringify(ACFG_CONSOLE_DEV)		"\0" \
+	"mtdparts="		MTDPARTS_DEFAULT			"\0" \
+	"partition=nand0,6\0"						\
+	"u-boot_addr="		__stringify(ACFG_MONITOR_OFFSET)	"\0" \
+	"env_addr="		__stringify(CONFIG_ENV_OFFSET)		"\0" \
+	"firmware_addr="	__stringify(CONFIG_FIRMWARE_OFFSET)	"\0" \
+	"firmware_size="	__stringify(CONFIG_FIRMWARE_SIZE)	"\0" \
+	"kernel_addr="		__stringify(CONFIG_KERNEL_OFFSET)	"\0" \
+	"rootfs_addr="		__stringify(CONFIG_ROOTFS_OFFSET)	"\0" \
+	"board_name="		__stringify(CONFIG_BOARD_NAME)		"\0" \
+	"kernel_addr_r=A0000000\0" \
+	"extrabootargs=otg_mode=device\0" 				\
+	"check_env=if test -n ${flash_env_version}; "			\
+		"then env default env_version; "			\
+		"else env set flash_env_version ${env_version}; env save; "\
+		"fi; "							\
+		"if itest ${flash_env_version} < ${env_version}; then " \
+			"echo \"*** Warning - Environment version"	\
+			" change suggests: run flash_reset_env; reset\"; "\
+			"env default flash_reset_env; "			\
+		"else exit; fi; \0"					\
+	"check_flash=nand lock; nand unlock ${env_addr}; \0"		\
+	"flash_reset_env=env default -f -a && saveenv &&"		\
+		"echo Flash environment variables erased!\0"		\
+	"download_uboot=tftpboot ${loadaddr} ${board_name}"		\
+		"-u-boot-with-spl.bin\0"				\
+	"flash_uboot=nand unlock ${u-boot_addr} ;"			\
+		"nand erase.part u-boot;"		\
+		"if nand write.trimffs ${fileaddr} ${u-boot_addr} ${filesize};"\
+			"then nand lock; nand unlock ${env_addr};"	\
+				"echo Flashing of uboot succeed;"	\
+			"else echo Flashing of uboot failed;"		\
+		"fi; \0"						\
+	"update_uboot=run download_uboot flash_uboot\0"			\
+	"download_env=tftpboot ${loadaddr} ${board_name}"		\
+		"-u-boot-env.txt\0"					\
+	"flash_env=env import -t ${loadaddr} && env save; \0"		\
+	"update_env=run download_env flash_env\0"			\
+	"download_firmware=tftpboot ${loadaddr} ${board_name}-firmware.bin\0"\
+	"flash_firmware=nand erase.part firmware;"			\
+		"if nand write.trimffs ${fileaddr} ${firmware_addr} "	\
+			"${filesize};"					\
+		"then echo Flashing of Firmware succeed;"		\
+		"else echo Flashing of Firmware failed;"		\
+		"fi\0"							\
+	"update_firmware=run download_firmware flash_firmware\0"	\
+	"load_firmware=nand read ${loadaddr} firmware && "		\
+		"fpga loadb 0 ${loadaddr} ${firmware_size} || "		\
+		"fpga load 0 ${loadaddr} ${firmware_size}; "		\
+		"if test $? -eq 0; "					\
+		"then echo Firmware successfully loaded;"		\
+		"else echo Loading firmware failed!;"			\
+		"fi;\0"							\
+	"checknload_firmware=if test -n ${firmware_autoload};"		\
+				"then run load_firmware; else exit; fi;\0"\
+	"download_dtb=tftpboot ${loadaddr} ${board_name}.dtb\0"		\
+	"flash_dtb=nand erase.part dtb;"				\
+		"if nand write.trimffs ${fileaddr} dtb ${filesize};"	\
+		"then echo Flashing dtb succeed;"			\
+		"else echo Flashing dtb failed;"			\
+		"fi;\0"							\
+	"update_dtb=run download_dtb flash_dtb\0"			\
+	"download_kernel=tftpboot ${loadaddr} ${board_name}-linux.bin\0"\
+	"flash_kernel=nand erase.part kernel;"				\
+		"if nand write.trimffs ${fileaddr} ${kernel_addr} "	\
+			"${filesize};"					\
+		"then echo Flashing of kernel succeed;"			\
+		"else echo Flashing of kernel failed;"			\
+		"fi\0"							\
+	"update_kernel=run download_kernel flash_kernel\0"		\
+	"download_rootfs=tftpboot ${loadaddr} ${board_name}-rootfs.ubi\0"\
+	"flash_rootfs=nand erase.part rootfs;"				\
+		"if nand write.trimffs ${fileaddr} ${rootfs_addr} "	\
+			"${filesize};"					\
+		"then echo Flashing of rootfs succeed;"			\
+		"else echo Flashing of rootfs failed;"			\
+		"fi\0"							\
+	"update_rootfs=run download_rootfs flash_rootfs\0"		\
+	"update_all=run update_kernel update_rootfs update_uboot &&"	\
+		"if test -n ${fdt_addr_r};"				\
+		"then run update_dtb; else exit; fi &&"			\
+		"if test -n ${firmware_autoload};"			\
+		"then run update_firmware; else exit; fi;\0"		\
+	"addipargs=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:"\
+		"${gatewayip}:${netmask}:${hostname}:eth0:off\0"	\
+	"addmmcargs=setenv bootargs ${bootargs} root=/dev/mmcblk0p1 "	\
+		"rootfstype=ext2\0"					\
+	"mmcboot=setenv bootargs console=${consoledev},${baudrate} "	\
+		"${mtdparts} ${extrabootargs}; run addmmcargs addipargs;"\
+		"mmc dev 0 &&"						\
+		"if test -n ${fdt_addr_r} ;"				\
+		"then ext2load mmc 0 ${fdt_addr_r} "			\
+			"/boot/${board_name}.dtb;"			\
+		"else echo no fdt_addr_r;"				\
+		"fi &&"							\
+		"ext2load mmc 0 ${kernel_addr_r} "			\
+			"/boot/${board_name}-linux.bin &&"		\
+		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
+	"addnfsargs=setenv bootargs ${bootargs} root=/dev/nfs rw "	\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"nfsboot=setenv bootargs console=${consoledev},${baudrate} "	\
+		"${mtdparts} ${extrabootargs}; run addnfsargs addipargs;"\
+		"nfs ${kernel_addr_r} ${serverip}:${rootpath}/boot/"	\
+			"${board_name}-linux.bin &&"			\
+		"if test -n ${fdt_addr_r};"				\
+		"then nfs ${fdt_addr_r} ${serverip}:${rootpath}/boot/"	\
+			"${board_name}.dtb;"				\
+		"else echo no fdt_addr_r;"				\
+		"fi &&"							\
+		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
+	"addubifsargs=setenv bootargs ${bootargs} ubi.mtd=rootfs "	\
+		"root=ubi0:rootfs rootfstype=ubifs\0"			\
+	"ubifsboot=setenv bootargs console=${consoledev},${baudrate} "	\
+		"${mtdparts} ${extrabootargs};run addubifsargs addipargs;"\
+		"if test -n ${fdt_addr_r};"				\
+		"then nand read ${fdt_addr_r} dtb;"			\
+		"else echo no fdt_addr_r;"				\
+		"fi &&"							\
+		"nboot ${kernel_addr_r} kernel;bootm ${kernel_addr_r} - "\
+			"${fdt_addr_r}\0"				\
+	"unlock_regs=mw 10000008 0; mw 10020008 0\0"			\
+
+/*
+ * Serial Driver
+ */
+#define CONFIG_MXC_UART
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_MXC_UART_BASE		UART1_BASE
+
+/*
+ * GPIO
+ */
+#define CONFIG_MXC_GPIO
+
+/*
+ * NOR
+ */
+
+/*
+ * NAND
+ */
+#define CONFIG_NAND_MXC
+
+#define CONFIG_MXC_NAND_REGS_BASE	0xD8000000
+#define CONFIG_SYS_NAND_BASE		CONFIG_MXC_NAND_REGS_BASE
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+
+#define CONFIG_MXC_NAND_HWECC
+#define CONFIG_SYS_NAND_LARGEPAGE
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
+#define CONFIG_SYS_NAND_PAGE_SIZE	2048
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
+#define CONFIG_SYS_NAND_PAGE_COUNT	CONFIG_SYS_NAND_BLOCK_SIZE / \
+						CONFIG_SYS_NAND_PAGE_SIZE
+#define CONFIG_SYS_NAND_SIZE		(256 * 1024 * 1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	11
+#define NAND_MAX_CHIPS			1
+
+
+#define CONFIG_SYS_DIRECT_FLASH_TFTP
+#define CONFIG_FLASH_SHOW_PROGRESS	45
+#define CONFIG_SYS_NAND_QUIET		1
+
+/*
+ * Partitions & Filsystems
+ */
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SUPPORT_VFAT
+
+/*
+ * UBIFS
+ */
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+
+/*
+ * Ethernet (on SOC imx FEC)
+ */
+#define CONFIG_FEC_MXC
+/*#define CONFIG_PHYLIB
+#define CONFIG_PHY_SMSC*/
+#define CONFIG_FEC_MXC_PHYADDR		0x1f
+#define CONFIG_MII				/* MII PHY management	*/
+
+/*
+ * FPGA
+ */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_FPGA
+#endif
+#define CONFIG_FPGA_COUNT		1
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_SPARTAN3
+#define CONFIG_SYS_FPGA_WAIT		250 /* 250 ms */
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
+#define CONFIG_SYS_FPGA_CHECK_CTRLC
+#define CONFIG_SYS_FPGA_CHECK_ERROR
+
+/* FPGA program pin configuration */
+#define ACFG_FPGA_PWR	(GPIO_PORTF | 19)	/* FPGA prog pin  */
+#define ACFG_FPGA_PRG	(GPIO_PORTF | 11)	/* FPGA prog pin  */
+#define ACFG_FPGA_CLK	(GPIO_PORTF | 15)	/* FPGA clk pin   */
+#define ACFG_FPGA_RDATA	0xD6000000		/* FPGA data addr */
+#define ACFG_FPGA_WDATA	0xD6000000		/* FPGA data addr */
+#define ACFG_FPGA_INIT	(GPIO_PORTF | 12)	/* FPGA init pin  */
+#define ACFG_FPGA_DONE	(GPIO_PORTF | 9)	/* FPGA done pin  */
+#define ACFG_FPGA_RW	(GPIO_PORTF | 21)	/* FPGA done pin  */
+#define ACFG_FPGA_CS	(GPIO_PORTF | 22)	/* FPGA done pin  */
+#define ACFG_FPGA_SUSPEND (GPIO_PORTF | 10)	/* FPGA done pin  */
+#define ACFG_FPGA_RESET	(GPIO_PORTF | 7)	/* FPGA done pin  */
+
+/*
+ * Fuses - IIM
+ */
+#ifdef CONFIG_CMD_IMX_FUSE
+#define IIM_MAC_BANK		0
+#define IIM_MAC_ROW		5
+#define IIM0_SCC_KEY		11
+#define IIM1_SUID		1
+#endif
+
+/*
+ * I2C
+ */
+
+#ifdef CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_MXC_I2C1_SPEED	100000	/* 100 kHz */
+#define CONFIG_SYS_MXC_I2C1_SLAVE	0x7F
+#define CONFIG_SYS_MXC_I2C2_SPEED	100000	/* 100 kHz */
+#define CONFIG_SYS_MXC_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_I2C_NOPROBES		{ }
+
+#ifdef CONFIG_CMD_EEPROM
+# define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM 24LC02 */
+# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* bytes of address */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* msec */
+#endif /* CONFIG_CMD_EEPROM */
+#endif /* CONFIG_CMD_I2C */
+
+/*
+ * SD/MMC
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MXC_MMC
+#define CONFIG_MXC_MCI_REGS_BASE	0x10014000
+#define PC_PWRON	(GPIO_PORTF | 16)
+#endif
+
+/*
+ * RTC
+ */
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_DS1374
+#define CONFIG_SYS_RTC_BUS_NUM		0
+#endif /* CONFIG_CMD_DATE */
+
+/*
+ * PLL
+ *
+ *  31 | x  |x| x x x x |x x x x x x x x x x |x x|x x x x|x x x x x x x x x x| 0
+ *     |CPLM|X|----PD---|--------MFD---------|XXX|--MFI--|-----MFN-----------|
+ */
+#define CONFIG_MX27_CLK32		32768	/* 32768 or 32000 Hz crystal */
+
+/*
+ * MPU CLOCK source before PLL
+ * ACFG_CLK_FREQ (2/3 MPLL clock or ext 266 MHZ)
+ */
+#define ACFG_MPCTL0_VAL		0x01EF15D5	/* 399.000 MHz */
+#define ACFG_MPCTL1_VAL		0
+#define CONFIG_MPLL_FREQ	399
+
+#define ACFG_CLK_FREQ	(CONFIG_MPLL_FREQ*2/3) /* 266 MHz */
+
+/* Serial clock source before PLL (should be named ACFG_SYSPLL_CLK_FREQ)*/
+#define ACFG_SPCTL0_VAL		0x0475206F	/* 299.99937 MHz */
+#define ACFG_SPCTL1_VAL		0
+#define CONFIG_SPLL_FREQ	300		/* MHz */
+
+/* ARM bus frequency (have to be a CONFIG_MPLL_FREQ ratio) */
+#define CONFIG_ARM_FREQ		399	/* up to 400 MHz */
+
+/* external bus frequency (have to be a ACFG_CLK_FREQ ratio) */
+#define CONFIG_HCLK_FREQ	133	/* (ACFG_CLK_FREQ/2) */
+
+#define CONFIG_PERIF1_FREQ	16	/* 16.625 MHz UART, GPT, PWM */
+#define CONFIG_PERIF2_FREQ	33	/* 33.25 MHz CSPI and SDHC */
+#define CONFIG_PERIF3_FREQ	33	/* 33.25 MHz LCD */
+#define CONFIG_PERIF4_FREQ	33	/* 33.25 MHz CSI */
+#define CONFIG_SSI1_FREQ	66	/* 66.50 MHz SSI1 */
+#define CONFIG_SSI2_FREQ	66	/* 66.50 MHz SSI2 */
+#define CONFIG_MSHC_FREQ	66	/* 66.50 MHz MSHC */
+#define CONFIG_H264_FREQ	66	/* 66.50 MHz H264 */
+#define CONFIG_CLK0_DIV		3	/* Divide CLK0 by 4 */
+#define CONFIG_CLK0_EN		1	/* CLK0 enabled */
+
+/* external bus frequency (have to be a CONFIG_HCLK_FREQ ratio) */
+#define CONFIG_NFC_FREQ		44	/* NFC Clock up to 44 MHz wh 133MHz */
+
+/* external serial bus frequency (have to be a CONFIG_SPLL_FREQ ratio) */
+#define CONFIG_USB_FREQ		60	/* 60 MHz */
+
+/*
+ * SDRAM
+ */
+#if (ACFG_SDRAM_MBYTE_SYZE == 64) /* micron MT46H16M32LF -6 */
+/* micron 64MB */
+#define PHYS_SDRAM_1_SIZE		0x04000000 /* 64 MB */
+#define PHYS_SDRAM_2_SIZE		0x04000000 /* 64 MB */
+#define ACFG_SDRAM_NUM_COL		9  /* 8, 9, 10 or 11
+					    * column address bits
+					    */
+#define ACFG_SDRAM_NUM_ROW		13 /* 11, 12 or 13
+					    * row address bits
+					    */
+#define ACFG_SDRAM_REFRESH		3  /* 0=OFF 1=2048
+					    * 2=4096 3=8192 refresh
+					    */
+#define ACFG_SDRAM_EXIT_PWD		25 /* ns exit power
+					    * down delay
+					    */
+#define ACFG_SDRAM_W2R_DELAY		1  /* write to read
+					    * cycle delay > 0
+					    */
+#define ACFG_SDRAM_ROW_PRECHARGE_DELAY	18 /* ns */
+#define ACFG_SDRAM_TMRD_DELAY		2  /* Load mode register
+					    * cycle delay 1..4
+					    */
+#define ACFG_SDRAM_TWR_DELAY		1  /* LPDDR: 0=2ck 1=3ck
+					    * SDRAM: 0=1ck 1=2ck
+					    */
+#define ACFG_SDRAM_RAS_DELAY		42 /* ns ACTIVE-to-PRECHARGE delay */
+#define ACFG_SDRAM_RRD_DELAY		12 /* ns ACTIVE-to-ACTIVE delay */
+#define ACFG_SDRAM_RCD_DELAY		18 /* ns Row to Column delay */
+#define ACFG_SDRAM_RC_DELAY		70 /* ns Row cycle delay (tRFC
+					    * refresh to command)
+					    */
+#define ACFG_SDRAM_CLOCK_CYCLE_CL_1	0 /* ns clock cycle time
+					   * estimated fo CL=1
+					   * 0=force 3 for lpddr
+					   */
+#define ACFG_SDRAM_PARTIAL_ARRAY_SR	0  /* 0=full 1=half 2=quater
+					    * 3=Eighth 4=Sixteenth
+					    */
+#define ACFG_SDRAM_DRIVE_STRENGH	0  /* 0=Full-strength 1=half
+					    * 2=quater 3=Eighth
+					    */
+#define ACFG_SDRAM_BURST_LENGTH		3  /* 2^N BYTES (N=0..3) */
+#define ACFG_SDRAM_SINGLE_ACCESS	0  /* 1= single access
+					    * 0 = Burst mode
+					    */
+#endif
+
+#if (ACFG_SDRAM_MBYTE_SYZE == 128)
+/* micron 128MB */
+#define PHYS_SDRAM_1_SIZE		0x08000000 /* 128 MB */
+#define PHYS_SDRAM_2_SIZE		0x08000000 /* 128 MB */
+#define ACFG_SDRAM_NUM_COL		9  /* 8, 9, 10 or 11
+					    * column address bits
+					    */
+#define ACFG_SDRAM_NUM_ROW		14 /* 11, 12 or 13
+					    * row address bits
+					    */
+#define ACFG_SDRAM_REFRESH		3  /* 0=OFF 1=2048
+					    * 2=4096 3=8192 refresh
+					    */
+#define ACFG_SDRAM_EXIT_PWD		25 /* ns exit power
+					    * down delay
+					    */
+#define ACFG_SDRAM_W2R_DELAY		1  /* write to read
+					    * cycle delay > 0
+					    */
+#define ACFG_SDRAM_ROW_PRECHARGE_DELAY	18 /* ns */
+#define ACFG_SDRAM_TMRD_DELAY		2  /* Load mode register
+					    * cycle delay 1..4
+					    */
+#define ACFG_SDRAM_TWR_DELAY		1  /* LPDDR: 0=2ck 1=3ck
+					    * SDRAM: 0=1ck 1=2ck
+					    */
+#define ACFG_SDRAM_RAS_DELAY		42 /* ns ACTIVE-to-PRECHARGE delay */
+#define ACFG_SDRAM_RRD_DELAY		12 /* ns ACTIVE-to-ACTIVE delay */
+#define ACFG_SDRAM_RCD_DELAY		18 /* ns Row to Column delay */
+#define ACFG_SDRAM_RC_DELAY		70 /* ns Row cycle delay (tRFC
+					    * refresh to command)
+					    */
+#define ACFG_SDRAM_CLOCK_CYCLE_CL_1	0 /* ns clock cycle time
+					   * estimated fo CL=1
+					   * 0=force 3 for lpddr
+					   */
+#define ACFG_SDRAM_PARTIAL_ARRAY_SR	0  /* 0=full 1=half 2=quater
+					    * 3=Eighth 4=Sixteenth
+					    */
+#define ACFG_SDRAM_DRIVE_STRENGH	0  /* 0=Full-strength 1=half
+					    * 2=quater 3=Eighth
+					    */
+#define ACFG_SDRAM_BURST_LENGTH		3  /* 2^N BYTES (N=0..3) */
+#define ACFG_SDRAM_SINGLE_ACCESS	0  /* 1= single access
+					    * 0 = Burst mode
+					    */
+#endif
+
+#if (ACFG_SDRAM_MBYTE_SYZE == 256)
+/* micron 256MB */
+#define PHYS_SDRAM_1_SIZE		0x10000000 /* 256 MB */
+#define PHYS_SDRAM_2_SIZE		0x10000000 /* 256 MB */
+#define ACFG_SDRAM_NUM_COL		10  /* 8, 9, 10 or 11
+					     * column address bits
+					     */
+#define ACFG_SDRAM_NUM_ROW		14 /* 11, 12 or 13
+					    * row address bits
+					    */
+#define ACFG_SDRAM_REFRESH		3  /* 0=OFF 1=2048
+					    * 2=4096 3=8192 refresh
+					    */
+#define ACFG_SDRAM_EXIT_PWD		25 /* ns exit power
+					    * down delay
+					    */
+#define ACFG_SDRAM_W2R_DELAY		1  /* write to read cycle
+					    * delay > 0
+					    */
+#define ACFG_SDRAM_ROW_PRECHARGE_DELAY	18 /* ns */
+#define ACFG_SDRAM_TMRD_DELAY		2  /* Load mode register
+					    * cycle delay 1..4
+					    */
+#define ACFG_SDRAM_TWR_DELAY		1  /* LPDDR: 0=2ck 1=3ck
+					    * SDRAM: 0=1ck 1=2ck
+					    */
+#define ACFG_SDRAM_RAS_DELAY		42 /* ns ACTIVE-to-PRECHARGE delay */
+#define ACFG_SDRAM_RRD_DELAY		12 /* ns ACTIVE-to-ACTIVE delay */
+#define ACFG_SDRAM_RCD_DELAY		18 /* ns Row to Column delay */
+#define ACFG_SDRAM_RC_DELAY		70 /* ns Row cycle delay (tRFC
+					    * refresh to command)
+					    */
+#define ACFG_SDRAM_CLOCK_CYCLE_CL_1	0 /* ns clock cycle time
+					   * estimated fo CL=1
+					   * 0=force 3 for lpddr
+					   */
+#define ACFG_SDRAM_PARTIAL_ARRAY_SR	0  /* 0=full 1=half 2=quater
+					    * 3=Eighth 4=Sixteenth
+					    */
+#define ACFG_SDRAM_DRIVE_STRENGH	0  /* 0=Full-strength
+					    * 1=half
+					    * 2=quater
+					    * 3=Eighth
+					    */
+#define ACFG_SDRAM_BURST_LENGTH		3  /* 2^N BYTES (N=0..3) */
+#define ACFG_SDRAM_SINGLE_ACCESS	0  /* 1= single access
+					    * 0 = Burst mode
+					    */
+#endif
+
+/*
+ * External interface
+ */
+/*
+ * CSCRxU_VAL:
+ * 31| x | x | x x |x x x x| x x | x | x  |x x x x|16
+ *   |SP |WP | BCD |  BCS  | PSZ |PME|SYNC|  DOL  |
+ *
+ * 15| x x  | x x x x x x | x | x x x x | x x x x |0
+ *   | CNC  |     WSC     |EW |   WWS   |   EDC   |
+ *
+ * CSCRxL_VAL:
+ * 31|  x x x x  | x x x x  | x x x x  | x x x x  |16
+ *   |    OEA    |   OEN    |   EBWA   |   EBWN   |
+ * 15|x x x x| x |x x x |x x x x| x | x | x  | x  | 0
+ *   |  CSA  |EBC| DSZ  |  CSN  |PSR|CRE|WRAP|CSEN|
+ *
+ * CSCRxA_VAL:
+ * 31|  x x x x  | x x x x  | x x x x  | x x x x  |16
+ *   |   EBRA    |   EBRN   |   RWA    |   RWN    |
+ * 15| x | x x |x x x|x x|x x|x x| x | x | x  | x | 0
+ *   |MUM| LAH | LBN |LBA|DWW|DCT|WWU|AGE|CNC2|FCE|
+ */
+
+/* CS0 configuration for 16 bit nor flash */
+#define ACFG_CS0U_VAL	0x0000CC03
+#define ACFG_CS0L_VAL	0xa0330D01
+#define ACFG_CS0A_VAL	0x00220800
+
+#define ACFG_CS1U_VAL	0x00000f00
+#define ACFG_CS1L_VAL	0x00000D01
+#define ACFG_CS1A_VAL	0
+
+#define ACFG_CS2U_VAL	0
+#define ACFG_CS2L_VAL	0
+#define ACFG_CS2A_VAL	0
+
+#define ACFG_CS3U_VAL	0
+#define ACFG_CS3L_VAL	0
+#define ACFG_CS3A_VAL	0
+
+#define ACFG_CS4U_VAL	0
+#define ACFG_CS4L_VAL	0
+#define ACFG_CS4A_VAL	0
+
+/* FPGA 16 bit data bus */
+#define ACFG_CS5U_VAL	0x00000600
+#define ACFG_CS5L_VAL	0x00000D01
+#define ACFG_CS5A_VAL	0
+
+#define ACFG_EIM_VAL	0x00002200
+
+
+/*
+ * FPGA specific settings
+ */
+
+/* CLKO */
+#define ACFG_CCSR_VAL 0x00000305
+/* drive strength CLKO set to 2 */
+#define ACFG_DSCR10_VAL 0x00020000
+/* drive strength A1..A12 set to 2 */
+#define ACFG_DSCR3_VAL 0x02AAAAA8
+/* drive strength ctrl */
+#define ACFG_DSCR7_VAL 0x00020880
+/* drive strength data */
+#define ACFG_DSCR2_VAL 0xAAAAAAAA
+
+
+/*
+ * Default configuration for GPIOs and peripherals
+ */
+#define ACFG_DDIR_A_VAL		0x00000000
+#define ACFG_OCR1_A_VAL		0x00000000
+#define ACFG_OCR2_A_VAL		0x00000000
+#define ACFG_ICFA1_A_VAL	0xFFFFFFFF
+#define ACFG_ICFA2_A_VAL	0xFFFFFFFF
+#define ACFG_ICFB1_A_VAL	0xFFFFFFFF
+#define ACFG_ICFB2_A_VAL	0xFFFFFFFF
+#define ACFG_DR_A_VAL		0x00000000
+#define ACFG_GIUS_A_VAL		0xFFFFFFFF
+#define ACFG_ICR1_A_VAL		0x00000000
+#define ACFG_ICR2_A_VAL		0x00000000
+#define ACFG_IMR_A_VAL		0x00000000
+#define ACFG_GPR_A_VAL		0x00000000
+#define ACFG_PUEN_A_VAL		0xFFFFFFFF
+
+#define ACFG_DDIR_B_VAL		0x000001F0
+#define ACFG_OCR1_B_VAL		0x0003ff00
+#define ACFG_OCR2_B_VAL		0x00000000
+#define ACFG_ICFA1_B_VAL	0xFFFC00FF
+#define ACFG_ICFA2_B_VAL	0xFFFFFFFF
+#define ACFG_ICFB1_B_VAL	0xFFFC00FF
+#define ACFG_ICFB2_B_VAL	0xFFFFFFFF
+#define ACFG_DR_B_VAL		0x000001F0
+#define ACFG_GIUS_B_VAL		0xFF3FFFF0
+#define ACFG_ICR1_B_VAL		0x00000000
+#define ACFG_ICR2_B_VAL		0x00000000
+#define ACFG_IMR_B_VAL		0x00000000
+#define ACFG_GPR_B_VAL		0x00000000
+#define ACFG_PUEN_B_VAL		0xFFFFFE0F
+
+#define ACFG_DDIR_C_VAL		0x00000000
+#define ACFG_OCR1_C_VAL		0x00000000
+#define ACFG_OCR2_C_VAL		0x00000000
+#define ACFG_ICFA1_C_VAL	0xFFFFFFFF
+#define ACFG_ICFA2_C_VAL	0xFFFFFFFF
+#define ACFG_ICFB1_C_VAL	0xFFFFFFFF
+#define ACFG_ICFB2_C_VAL	0xFFFFFFFF
+#define ACFG_DR_C_VAL		0x00000000
+#define ACFG_GIUS_C_VAL		0xFFFFC07F
+#define ACFG_ICR1_C_VAL		0x00000000
+#define ACFG_ICR2_C_VAL		0x00000000
+#define ACFG_IMR_C_VAL		0x00000000
+#define ACFG_GPR_C_VAL		0x00000000
+#define ACFG_PUEN_C_VAL		0xFFFFFF87
+
+#define ACFG_DDIR_D_VAL		0x00000000
+#define ACFG_OCR1_D_VAL		0x00000000
+#define ACFG_OCR2_D_VAL		0x00000000
+#define ACFG_ICFA1_D_VAL	0xFFFFFFFF
+#define ACFG_ICFA2_D_VAL	0xFFFFFFFF
+#define ACFG_ICFB1_D_VAL	0xFFFFFFFF
+#define ACFG_ICFB2_D_VAL	0xFFFFFFFF
+#define ACFG_DR_D_VAL		0x00000000
+#define ACFG_GIUS_D_VAL		0xFFFFFFFF
+#define ACFG_ICR1_D_VAL		0x00000000
+#define ACFG_ICR2_D_VAL		0x00000000
+#define ACFG_IMR_D_VAL		0x00000000
+#define ACFG_GPR_D_VAL		0x00000000
+#define ACFG_PUEN_D_VAL		0xFFFFFFFF
+
+#define ACFG_DDIR_E_VAL		0x00000000
+#define ACFG_OCR1_E_VAL		0x00000000
+#define ACFG_OCR2_E_VAL		0x00000000
+#define ACFG_ICFA1_E_VAL	0xFFFFFFFF
+#define ACFG_ICFA2_E_VAL	0xFFFFFFFF
+#define ACFG_ICFB1_E_VAL	0xFFFFFFFF
+#define ACFG_ICFB2_E_VAL	0xFFFFFFFF
+#define ACFG_DR_E_VAL		0x00000000
+#define ACFG_GIUS_E_VAL		0xFCFFCCF8
+#define ACFG_ICR1_E_VAL		0x00000000
+#define ACFG_ICR2_E_VAL		0x00000000
+#define ACFG_IMR_E_VAL		0x00000000
+#define ACFG_GPR_E_VAL		0x00000000
+#define ACFG_PUEN_E_VAL		0xFFFFFFFF
+
+#define ACFG_DDIR_F_VAL		0x00000000
+#define ACFG_OCR1_F_VAL		0x00000000
+#define ACFG_OCR2_F_VAL		0x00000000
+#define ACFG_ICFA1_F_VAL	0xFFFFFFFF
+#define ACFG_ICFA2_F_VAL	0xFFFFFFFF
+#define ACFG_ICFB1_F_VAL	0xFFFFFFFF
+#define ACFG_ICFB2_F_VAL	0xFFFFFFFF
+#define ACFG_DR_F_VAL		0x00000000
+#define ACFG_GIUS_F_VAL		0xFF7F8000
+#define ACFG_ICR1_F_VAL		0x00000000
+#define ACFG_ICR2_F_VAL		0x00000000
+#define ACFG_IMR_F_VAL		0x00000000
+#define ACFG_GPR_F_VAL		0x00000000
+#define ACFG_PUEN_F_VAL		0xFFFFFFFF
+
+/* Enforce DDR signal strengh & enable USB/PP/DMA burst override bits */
+#define ACFG_GPCR_VAL		0x0003000F
+
+#define ACFG_ESDMISC_VAL	ESDMISC_LHD+ESDMISC_MDDREN
+
+/* FMCR select num LPDDR RAMs and nand 16bits, 2KB pages */
+#if (CONFIG_NR_DRAM_BANKS == 1)
+#define ACFG_FMCR_VAL 0xFFFFFFF9
+#elif (CONFIG_NR_DRAM_BANKS == 2)
+#define ACFG_FMCR_VAL 0xFFFFFFFB
+#endif
+
+#define ACFG_AIPI1_PSR0_VAL	0x20040304
+#define ACFG_AIPI1_PSR1_VAL	0xDFFBFCFB
+#define ACFG_AIPI2_PSR0_VAL	0x00000000
+#define ACFG_AIPI2_PSR1_VAL	0xFFFFFFFF
+
+/* PCCR enable DMA FEC I2C1 IIM SDHC1 */
+#define ACFG_PCCR0_VAL		0x05070410
+#define ACFG_PCCR1_VAL		0xA14A0608
+
+/*
+ * From here, there should not be any user configuration.
+ * All Equations are automatic
+ */
+
+/* fixme none integer value (7.5ns) => 2*hclock = 15ns */
+#define ACFG_2XHCLK_LGTH	(2000/CONFIG_HCLK_FREQ)	/* ns */
+
+/* USB 60 MHz ; ARM up to 400; HClK up to 133MHz*/
+#define CSCR_MASK 0x0300800D
+
+#define ACFG_CSCR_VAL						\
+	(CSCR_MASK						\
+	|((((CONFIG_SPLL_FREQ/CONFIG_USB_FREQ)-1)&0x07) << 28)	\
+	|((((CONFIG_MPLL_FREQ/CONFIG_ARM_FREQ)-1)&0x03) << 12)	\
+	|((((ACFG_CLK_FREQ/CONFIG_HCLK_FREQ)-1)&0x03) << 8))
+
+/* SSIx CLKO NFC H264 MSHC */
+#define ACFG_PCDR0_VAL\
+	(((((ACFG_CLK_FREQ/CONFIG_MSHC_FREQ)-1)&0x3F)<<0)	\
+	|((((CONFIG_HCLK_FREQ/CONFIG_NFC_FREQ)-1)&0x0F)<<6)	\
+	|(((((ACFG_CLK_FREQ/CONFIG_H264_FREQ)-2)*2)&0x3F)<<10)\
+	|(((((ACFG_CLK_FREQ/CONFIG_SSI1_FREQ)-2)*2)&0x3F)<<16)\
+	|(((CONFIG_CLK0_DIV)&0x07)<<22)\
+	|(((CONFIG_CLK0_EN)&0x01)<<25)\
+	|(((((ACFG_CLK_FREQ/CONFIG_SSI2_FREQ)-2)*2)&0x3F)<<26))
+
+/* PERCLKx  */
+#define ACFG_PCDR1_VAL\
+	(((((ACFG_CLK_FREQ/CONFIG_PERIF1_FREQ)-1)&0x3F)<<0)	\
+	|((((ACFG_CLK_FREQ/CONFIG_PERIF2_FREQ)-1)&0x3F)<<8)	\
+	|((((ACFG_CLK_FREQ/CONFIG_PERIF3_FREQ)-1)&0x3F)<<16)	\
+	|((((ACFG_CLK_FREQ/CONFIG_PERIF4_FREQ)-1)&0x3F)<<24))
+
+/* SDRAM controller programming Values */
+#if (((2*ACFG_SDRAM_CLOCK_CYCLE_CL_1) > (3*ACFG_2XHCLK_LGTH)) || \
+	(ACFG_SDRAM_CLOCK_CYCLE_CL_1 < 1))
+#define REG_FIELD_SCL_VAL 3
+#define REG_FIELD_SCLIMX_VAL 0
+#else
+#define REG_FIELD_SCL_VAL\
+	((2*ACFG_SDRAM_CLOCK_CYCLE_CL_1+ACFG_2XHCLK_LGTH-1)/ \
+		ACFG_2XHCLK_LGTH)
+#define REG_FIELD_SCLIMX_VAL REG_FIELD_SCL_VAL
+#endif
+
+#if ((2*ACFG_SDRAM_RC_DELAY) > (16*ACFG_2XHCLK_LGTH))
+#define REG_FIELD_SRC_VAL 0
+#else
+#define REG_FIELD_SRC_VAL\
+	((2*ACFG_SDRAM_RC_DELAY+ACFG_2XHCLK_LGTH-1)/ \
+		ACFG_2XHCLK_LGTH)
+#endif
+
+/* TBD Power down timer ; PRCT Bit Field Encoding; burst length 8 ; FP = 0*/
+#define REG_ESDCTL_BASE_CONFIG (0x80020485\
+				| (((ACFG_SDRAM_NUM_ROW-11)&0x7)<<24)\
+				| (((ACFG_SDRAM_NUM_COL-8)&0x3)<<20)\
+				| (((ACFG_SDRAM_REFRESH)&0x7)<<13))
+
+#define ACFG_NORMAL_RW_CMD	((0x0<<28)+REG_ESDCTL_BASE_CONFIG)
+#define ACFG_PRECHARGE_CMD	((0x1<<28)+REG_ESDCTL_BASE_CONFIG)
+#define ACFG_AUTOREFRESH_CMD	((0x2<<28)+REG_ESDCTL_BASE_CONFIG)
+#define ACFG_SET_MODE_REG_CMD	((0x3<<28)+REG_ESDCTL_BASE_CONFIG)
+
+/* ESDRAMC Configuration Registers : force CL=3 to lpddr */
+#define ACFG_SDRAM_ESDCFG_REGISTER_VAL (0x0\
+	| (((((2*ACFG_SDRAM_EXIT_PWD+ACFG_2XHCLK_LGTH-1)/ \
+		ACFG_2XHCLK_LGTH)-1)&0x3)<<21)\
+	| (((ACFG_SDRAM_W2R_DELAY-1)&0x1)<<20)\
+	| (((((2*ACFG_SDRAM_ROW_PRECHARGE_DELAY+ \
+		ACFG_2XHCLK_LGTH-1)/ACFG_2XHCLK_LGTH)-1)&0x3)<<18) \
+	| (((ACFG_SDRAM_TMRD_DELAY-1)&0x3)<<16)\
+	| (((ACFG_SDRAM_TWR_DELAY)&0x1)<<15)\
+	| (((((2*ACFG_SDRAM_RAS_DELAY+ACFG_2XHCLK_LGTH-1)/ \
+		ACFG_2XHCLK_LGTH)-1)&0x7)<<12) \
+	| (((((2*ACFG_SDRAM_RRD_DELAY+ACFG_2XHCLK_LGTH-1)/ \
+		ACFG_2XHCLK_LGTH)-1)&0x3)<<10) \
+	| (((REG_FIELD_SCLIMX_VAL)&0x3)<<8)\
+	| (((((2*ACFG_SDRAM_RCD_DELAY+ACFG_2XHCLK_LGTH-1)/ \
+		ACFG_2XHCLK_LGTH)-1)&0x7)<<4) \
+	| (((REG_FIELD_SRC_VAL)&0x0F)<<0))
+
+/* Issue Mode register Command to SDRAM */
+#define ACFG_SDRAM_MODE_REGISTER_VAL\
+	((((ACFG_SDRAM_BURST_LENGTH)&0x7)<<(0))\
+	| (((REG_FIELD_SCL_VAL)&0x7)<<(4))\
+	| ((0)<<(3)) /* sequentiql access */ \
+	/*| (((ACFG_SDRAM_SINGLE_ACCESS)&0x1)<<(1))*/)
+
+/* Issue Extended Mode register Command to SDRAM */
+#define ACFG_SDRAM_EXT_MODE_REGISTER_VAL\
+	((ACFG_SDRAM_PARTIAL_ARRAY_SR<<0)\
+	| (ACFG_SDRAM_DRIVE_STRENGH<<(5))\
+	| (1<<(ACFG_SDRAM_NUM_COL+ACFG_SDRAM_NUM_ROW+1+2)))
+
+/* Issue Precharge all Command to SDRAM */
+#define ACFG_SDRAM_PRECHARGE_ALL_VAL (1<<10)
+
+#endif /* __CONFIG_H */


hooks/post-receive
-- 
armadeus