[Armadeus-commitlog] armadeus annotated tag, armadeus-5.3-rc1, created. armadeus-5.3-rc1
Brought to you by:
sszy
Menu
▾
▴
[Armadeus-commitlog] armadeus annotated tag, armadeus-5.3-rc1, created. armadeus-5.3-rc1
|
From: jorasse <jo...@us...> - 2013-11-15 09:54:13
|
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "armadeus".
The annotated tag, armadeus-5.3-rc1 has been created
at ff4becf0078e9a04f6be5b2c0e09a80ca841f6b6 (tag)
tagging 36d45d5a51afc36a4b1d7a4d45bae4d44f9d96c0 (commit)
replaces armadeus-5.2
tagged by Eric Jarrige
on Fri Nov 15 10:53:44 2013 +0100
- Log -----------------------------------------------------------------
Armadeus release candidate v5.3-rc1
Andrey Valyaev (1):
Linux:APF51: manage useless write protection microSD pin
Cedric Grimault (1):
arm/imx/gpio: add spinlock protection
Eric Jarrige (179):
[OTHER] start software GIT development for the next release
[UBOOT] update patchwork to support U-Boot 2012.10
[UBOOT] 2012.10: add APF board configuration files for U-Boot 2012.10
[UBOOT] 2012.10/apf27: update configuration - fix script flash_reset_env
[UBOOT] 2012.10/apf28: speed up U-Boot by forcing code relocation into cached memory
[UBOOT] 2012.10/apf27: speed up U-Boot by forcing code relocation into cached memory
Merge branch 'master' of ssh://armadeus.git.sourceforge.net/gitroot/armadeus/armadeus
[UBOOT] 2012.10: build user friendly continuous multi RAMs memory mapping - add U-Boot feature to support non contiguous RAM banks
[UBOOT] 2012.10/apf9328: update configuration - fix script flash_reset_env
[UBOOT] 2012.10/apf28: update configuration - fix script flash_reset_env - fix SD pin drive strength
[UBOOT] 2012.10/apf51: update configuration - fix script flash_reset_env - no NFS support due to the boot memory constraints
[UBOOT] APF27: 2012.10: update to support the new APF27 patch refactoring
[BUILROOT] prepare migration to the next BR release
[BUILROOT] Add updated BR patches to support the next BR release and to push some patches to BR mainline
[BUILROOT] add config files for busybox 1.20.2 and uClibc 0.9.33.2
[BUILROOT] fix armadeus package .mk files to support new and legacy BR version
[BUILROOT] fix PPS package .mk files to support new and legacy BR version
[BUILROOT] update the upcoming compatibility with BR 2012.11
[BUILROOT] update ussp patch and cleanup_buildroot script
[BUILROOT] uclibc : patch cleanup and extand accept4 patches to uclibc 0.9.33.2 - to fix QT compilation issue
[BUILD] Fix uClibc-0.9.33.2.config and busybox-1.20.2 .config hard link - Thx Victor
[BUILD] Add the missing file busybox-1.20.config - Thx Victor
[LINUX] apf28: fix capabilities to drive multiple PWM lines
[BILDROOT] 2012.11: update to support next BR release
[BILDROOT] 2012.11: partial cleanup
[BILDROOT] 2012.11: partial cleanup
[BILDROOT] 2012.11: partial cleanup
[BILDROOT] 2012.11: partial cleanup
[BILDROOT] 2012.11: partial cleanup
[BILDROOT] boost: copy author comment and signed-off into enclosed patch
[BUILDROOT] 2012.11: Fix dbus installation when var/lib does not exist yet
[BUILD] remove useless check of BASH shell. Recent versions of Buildroot have fixed issues with DASH
[BUILD] update patches for BR 2012.11.1
[UBOOT] 2012.04: APF27: add I2C driver and support for I2C multibus
[UBOOT] 2012.10: APF27: add I2C driver with support for I2C multibus
[LINUX] 2.6.35: APF28:Â disable by default DMA mode for Application UART - DMA mode may be source of extra delays with communication based on too few amount of bytes : terminal, GPS, GSM/GPRS..
[UBOOT] initial bump to U-Boot 2013.01.01
[LINUX] 2.6.38: fix MCP49x2 DAC trigger conversion and add capabilites to select condition to start DAC conversion
[LINUX] 2.6.38: wm8960: Fix registers definition, PLL, clocks.. errors; also add audio input feature
[LINUX] 2.6.38: update apf51_dev board to support wm8960 new audio input/ouput capabilities
[TEST] apf51: audio: Fix audio capture default parameter
[ROOTFS] WiFi: add WPA config and scripts files
[BUILDROOT] add wpa_supplicant package to all config supporting wireless tools
[ROOTFS] update wpa-cli script to avoid multiple instance of udhcpc deamon
[ROOTFS] disable syslogd and klog from inittab. They are alreay running from S01logging script
[BUILD] use BUILDROOT_DL_DIR (if defined) to avoid multiple download of Buildroot tool
Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
[BUILD] use BUILDROOT_DL_DIR (if defined) to avoid multiple download of Buildroot tool
[BUILDROOT] 2013.02: initial support of BR 2013.02
[BUILDROOT] Busybox 1.21.0: Fix busybox default configuration
[BUILDROOT] 2013.02: cleanup and fix armadeus patch hunk and fuzz
[UBOOT] cleanup obsolete U-Boot version of patches: 2011.12
[OTHER] Busybox: Disable RS485 path in order to fix APF27 and APF9328 compilation errors
[BUILDROOT] 2013.02: Add option to disable management frame protection (IEEE 802.11w)
[BUILDROOT] 2013.02: update apf51 and apf28 config to support management frame protection (IEEE 802.11W)
[OTHER] Busybox: cleanup obsolete patch
[BUILDROOT] preliminary migration to BR 2013.05
[BUILDROOT] cleanup BR 2012.11.1 patches
[UBOOT] 2013.04: start update
[UBOOT] 2013.04: add apf27 config file
[UBOOT] 2013.01.01: add apf27 config file
[UBOOT] 2013.01.01: add apf27 config file
[UBOOT] 2013.04: add apf27 config file
[UBOOT] 2013.04: update apf27 FEC config and re-enable CONFIG_SYS_DIRECT_FLASH_TFTP
[UBOOT] cleanup 2012.10 patchwork
[UBOOT] 2013.04: add apf9328 config file - cleanup 2012.10 config
[UBOOT] 2013.04: fix apf28 compilation errors
[UBOOT] 2013.04: add apf28 configuration file
[UBOOT] 2012.10: cleanup
[UBOOT] 2013.04: workaround to fix APF27 PHY power on reset issue: disable CONFIG_PHYLIB
[BUILDROOT] bump to BuildRoot 2013.05 - may require a git clean -dfx to rebuild the world. do not forget to backup your work in progress
[LINUX] 2.6.38: fix runtime excpetion when building with gcc 4.7..
[BUILDROOT] apf51: update to binutils version 2.23.2 - GCC 4.7.3 (BR default internal GCC release)
[BUILDROOT] apf28: update to binutils version 2.23.2 - GCC 4.7.3 (BR default internal GCC release)
Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
[BUILDROOT] apf27: update to binutils version 2.23.2 - GCC 4.7.3 (BR default internal GCC release)
[BUILDROOT] apf9328: update to binutils version 2.23.2 - GCC 4.7.3 (BR default internal GCC release)
[BUILDROOT] apf27: bump to U-Boot 2013.04
[BUILDROOT] apf28: bump to U-Boot 2013.04
[BUILDROOT] apf9328: bump to U-Boot 2013.04
[UBOOT] 2013.04: apf51: Add new SPL supporting bigger U-Boot memory footprint
[UBOOT] apf51: add U-Boot 2013.04 configuration file - first draft
[UBOOT] 2013.04: apf51: patch clean-up
[UBOOT] 2013.04: apf51: extend SDRAM pin init - and new clean-up
[BUILDROOT] make U-Boot custom config option generic to be submited upstream
[BUILDROOT] add U-Boot option to build any binary file format
[BUILDROOT] update patch supporting the Safe Boot file format
[OTHER] update makefiles according to the new U-Boot option
[BUILD] all apf/pps boards: update default config file to support the new option added to BUILDROOT
[UBOOT] 2013.04: apf51: Update default - configuration - environment variables to use the new U-Boot file format u-boot-with-nand-spl.imx
[UBOOT] 2013.04: apf51: Update I2C & SD/MMC configuration - work in progress
[UBOOT] 2013.04: apf51: fix last nand lock/unlock bug - update to patch revision 2.1
[BUILDROOT] apf51: bump to U-Boot 2013.04
[UBOOT] cleanup non supported version and config
[BUILDROOT] patchwork 2013.02: cleanup non supported version
[UBOOT] 2013.04: remove spartan6 patch. now natively supported by U-Boot
[UBOOT] 2013.04: apf51: fix mmc card detect
[UBOOT] 2013.04: cleanup / replace config file full header by SPDX-Licence-identifier
[OTHER] add GNU GPL version 2 licence information
[UBOOT] apf51: recover settings dammaged with last commit
[BUILDROOT] add an external environment to be used by U-Boot
[BUILDROOT] apf51: update config to build apf51-u-boot-env.bin
[BUILDROOT] apf27: update config to build apf27-u-boot-env.bin
Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
[UBOOT] enhance FPGA / firmware management scripts.
[UBOOT] apf27: update to use external environment scripts.
[UBOOT] apf51: fix nand lock/unlock page alignement and access to IP registers
[UBOOT] improvement environment scripts
[UBOOT] spartan: Fix FPGA download issue when firmware is not valid - also add user inerface to stop download using ctrl-c
[UBOOT] apf51: update to use external environment scripts.
[UBOOT] apf27: simplify FPGA management and improve download reliability
[UBOOT] apf27: Fix FPGA state after abort action
[UBOOT] apf9328: update to use external environment scripts.
[UBOOT] apf51: FPGA cleanup
[UBOOT] apf27: FPGA cleanup
[UBOOT] apf28: update to use external environment scripts.
[BUILDROOT] update pps config to BuidlRoot 2013.05 and U-Boot 3012.04
[BUILDROOT] update pps51 config to BuidlRoot 2013.05 and U-Boot 3012.04
Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
[BUILDROOT] fpga_firmware: add option to use some custom fpga firmware and provide a link to be used by U-Boot
[BUILDROOT] apf51: export dual UART FPGA firmware for GSM/GPS to be handle by U-Boot
[BUILDROOT] apf9328: update config to export fpga firmware blinking_led by default to be handle by U-Boot
[BUILDROOT] apf27: update config to export fpga firmware blinking_led by default to be handle by U-Boot
[UBOOT] apf51: Fix FPGA capability to re-load firmware multiple time
[BUILDROOT] add linux hooks to support linux kernel and DTB bin files for the Armadeus boards
[UBOOT] change to handle linux DTB file - do not update environment by default
[BUILDROOT] remove most of the armadeus patch concerning linux - customization managed by dedidacted hook rules.
[UBOOT] remove the unused variable cpu_name.
[BUILDROOT] fix custom kernel/dtb install script when building non device tree kernel
[BUILDROOT] small cleanup to enforce apply BR patches again after previous commit that removed some other patches
[UBOOT] apf27: fix init dcache boot issue
[LINUX] apf28: update config to support linux 3.10.7
[UBOOT] apf9328: update U-Boot script: update_all
[UBOOT] scripts: fix script log message: flash_dtb
[LINUX] apf28: update config for kernel 3.10.9
[LINUX] apf27: update config for kernel 3.10.9
[LINUX] apf51: update config for kernel 3.10.9
[BUILDROOT] Fix typo and update apf51/pps51 default configs
Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
[BUILDROOT] remove fbtest - use BR fb-test instead
[BUILDROOT] disable broken patchs -- they should be fixed or will be deleted for the next release
[BUILD] fix command for a make apfxx_autoconf
[BUILD] fix sdl_water patch cleanup
[BUILDROOT] fix apf27test config
[BUILDROOT] apf51: update and fix test config
Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
[BUILDROOT] apf28: update and fix test config
[BUILDROOT] apf27: update and fix test config
[BUILDROOT] apf28: update again test config
[BUILDROOT] apf28: fix again test config
[TEST] apf51: update framebuffer test script
[TEST] apf51: disable gstreamer (not used) to build the test config
[LINUX] 3.10: apf28: update to 3.10.11
[LINUX] 3.10: apf51: update to 3.10.11
[UBOOT] 2013.04: restore command env param compatitbility
[BUILDROOT] Fix rootfs name for the apf boards
[UBOOT] apf27: Fix ubifsmount command
[UBOOT] apf51: cleanup
[LINUX] apf51, apf27: align NAND BBT description to the linux/UBoot mainline
[LINUX] 2.6.38: patch cleanup
[UBOOT] 2013.04: move back all the env. variables to U-Boot default configuration
[UBOOT] keep external environment file as an exemple of customization
[UBOOT] apf9328: Fix double boot
[TOOLS] apf9328: Fix U-Boot recover tool capabilities to reset env variables - enhance to download U-Boot binary image from our server
[TOOLS] apf9328: use defined u-boot binary finename
[TOOLS] apf27: Fix U-Boot recover tool capabilities to reset env variables - enhance to download U-Boot binary image from our server
[LINUX] 3.x: update apf28 & apf51 to 3.10.12 3.11.2
[BUILDROOT] apf9328: Fix test config
[UBOOT] apf51: 2013.04: make it compatible with recover tool
[TOOLS] apf51: Fix U-Boot recover tool capabilities to reset env variables - enhance to download U-Boot binary image from our server
[LINUX] 3.10: apf28: move to 3.10.15
[LINUX] 3.10: apf51: move to 3.10.15
[LINUX] 3.11: apf51/apf28: move to 3.11.4
[LINUX] 3.10: apf28: move to 3.10.16
[LINUX] 3.10: apf51: move to 3.10.16
[LINUX] 3.11: apf28: move to 3.11.6
[LINUX] 3.11: apf51: move to 3.11.6
[BUILDROOT] cleanup patchwork
[BUILDROOT] tslib: fix ubuntu 13.10 compil error
Fabien Marteau (26):
[buildroot][package] adding python-crc16 module
[kernel][fpga][pod_gpio] adding irq number information when probed
Merge branch 'master' of ssh://armadeus.git.sourceforge.net/gitroot/armadeus/armadeus
[kernel] Adding mcp7940x rtc driver
[debug][imxregs] adding some registers for apf51
Merge branch 'master' of ssh://armadeus.git.sourceforge.net/gitroot/armadeus/armadeus
[U-BOOT][2012.04][APF51] increase DDR RAM timings
[linux][imx28] adding_spi3
[software][uboot] nitpick in uboot_recover python code
Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
[buildroot] Gnokii: add sms management program gnokii
[apf28][kernel] refresh touch status only on touch detection
[kernel][irq_ocore] Fix irq manager bug for FPGA
[kernel][module][fpga][virtual_component][irq_ocore] remove properly
Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
[buildroot][package] adding python-pyro 3.14 module
[buildroot][package] cleanup python pyro package
[buildroot][package] Adding beremiz runtime side package
[buildroot][package] Adding matIEC compilator for host side
[buildroot] cleanup matiec package
[buildroot][package][beremiz] install beremiz host side
linux: driver: rtc: mcp7940x manage alarm
kernel:mcp7940x: adding driver for kernel 2.6.38 and 2.6.35
[linux] microSD bug correction (patch 2.6.39-stable backport)
as_devices: fix as_gpio.h comments
firmware:pod_scripts: exit scripts
Gwenhael Goavec-Merou (79):
[LINUX] APF28: Add 3.7-rc3 kernel config file
[LINUX][3.7-rc3] APF28: import patch 0419
[LINUX][3.7-rc3] APF28: adapt patches 0403, 0418, 0419 from 3.6
[LINUX][3.7] apf9328: adapt patches 0021, 0024 from 2.6.38
[LINUX][3.7] apf9328: correct dma clock shift register
[LINUX][3.7] apf9328: fix patch 0029b
[LINUX][3.7] apf9328: add linux 3.7 and 3.7-rc6 kernel config
[LINUX][3.7] mx27: add a clock gate to activate SPLL clock
[LINUX][3.7] mx27: enable EHCI PER clock
[LINUX][3.7] APF27: config: Add ehci and scsi disk support by default
[LINUX][3.7] APF27: Update lcd support
[LINUX][3.7] APF27: config: Add imx framebuffer support by default
[LINUX][3.7] mx27: backlight: fix constrast pwm issue
Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
[LINUX][3.7] mx27: SPI: rename ipg clock and add per clock
[LINUX][3.7] adapt patches 073* and 074* from 2.6.38
[LINUX][3.7] apf27-dev: update SPI support
[LINUX][3.7] apf27 config: select touchscreen by default
[LINUX][3.8] imx-fb: modifies platform device name
[LINUX][3.8] imx-fb: fix imxfb_info configuration order
[DEBUG] Add HW_PINCTRL_DRIVERxx register to imxregs (APF28)
[LINUX][APF28] kernel config: EHCI support must be set to have chipidea host support
[LINUX] 3.8: move rc4 support to rc5
[LINUX][3.8] adapt patch 0203
[LINUX][3.8] suppress now mainlined patches 0206 and 0207
Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
[LINUX][3.8] mxs: gpio-mxs: Add IRQ_TYPE_EDGE_BOTH support
[LINUX][3.8] mxs: gpio-mxs: Use EDGE instead of LEVEL
[LINUX][3.7] imx: allows to use pwm-imx without device tree
[LINUX][3.7] imx: update platform mxc-pwm to register driver with device id instead of driver name
[LINUX][3.7] imx27: pwm: adds the mandatory macro to select this peripheral
[LINUX][3.7] imx27: pwm: rename ipg clock and add per clock
[LINUX][3.7] apf27: add pwm support
[LINUX][3.7] apf27 config: select pwm-imx by default
[LINUX][3.8] mxs: adapt linaro patch for touchscreen support through lradc
[LINUX][3.8] apf28dev: dts: add support for touchscreen
[LINUX][3.8] imx51-apf51dev: Add APF51dev DT support
[LINUX][3.8] imx51: adapt patch 427 from 3.0
[LINUX][3.8] apf51dev: Add fsl,no_sdio_irq property for esdhci2
[LINUX][3.8] apf51: add support for led trigger and heartbeat
[LINUX][3.8] apf51dev: DT: Add imx51-apf51dev to dts Makefile
[LINUX][3.8] imx51: DT: add ecspi2 pinmux
[LINUX][3.8] apf51dev: DT: add basic support for ecspi
[BUILDROOT] xenomai: DL_DIR must be used instead of BR2_DL_DIR (thanks Victor)
[LINUX][3.8] imx51: dt: add second pinctrl group for i2c2
[LINUX][3.8] apf51dev: dt: add basic support for i2c2
Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
[LINUX][3.10] apf27, apf51: Add support for 3.10-rc2
[LINUX][3.10] adapts patches 0200, 0400, 0401 and 0442 from 3.8
[LINUX][3.10] copy patches from 3.8
[LINUX][3.10] Add 3.10-rc2 patches support
[LINUX][3.10] 3.10-rc2: add apf28 config
[LINUX][3.11][3.11-rc1] Add apf51 support
[LINUX][3.11] apf51: Add USB support
[LINUX][3.11] imx51: Add USB pinctrl
[LINUX][3.11] imx51: chipidea: first draft to add imx51 chipidea support (tested only with host2)
[LINUX][3.11] imx: pinctrl: backport and adapt pinctrl support from linaro
[LINUX][3.11] imx27-apf27dev.dts: Add hog pinctrl support
[LINUX][3.11] patch 0206-b: the IS_ENABLED parameter must have CONFIG_
[LINUX][3.11] move APF27 support to 3.11-rc4
[LINUX][3.11] imx27: dt: backport framebuffer support
[LINUX][3.11] imx27: dt: add framebuffer pinctrl
[LINUX][3.11] imx27-apf27dev: add framebuffer and display support
[LINUX][3.11] imxfb: dt: add pwmr attribute
[LINUX][3.11] 0204: update hook to dt
[LINUX][3.11] imx27 dt: fix CSPI PER clock id
[LINUX][3.11] imx27 dt: add CSPI pinctrl
[LINUX][3.11] imx27: dt: add pinctrl for CSPI and SHDCI
[LINUX][3.11] imx27: dt: add pinctrl for CSPI node
[LINUX][3.11] imx27-apf27dev: dt: add SDHCI support
[LINUX][3.11] apf51: usbh1 & usbh2 phys have a reset pin
[LINUX] APF28: add 3.11 / 3.11.1 support
[LINUX] APF28: fix mac address detection
[LINUX][3.12] Add support for 3.12(-rc1)
[LINUX][3.12] imx27: Update patches 0206* with latest version provided
[LINUX][3.12] adapt patches 0209, 0213, 0214, 0404, 0408, 0409, 0441, 0443 from 3.11
[LINUX][3.12] Add APF28 config for 3.12(-rc1)
[LINUX][3.12] apf27 & apf27dev: dts: Add pinctrl for peripherals
[LINUX][3.12] apf27 & apf27dev: dts: Add pinctrl for peripherals
Janos Angeli (12):
Fix nanocom download URL
Add minicom terminal program
[BUILDROOT] Add Joe's Own Editor program
[LINNUX] 2.6.35: APF28/MX28: Add RS485 support to mxs-auart driver
[BUILDROOT] BusyBox 1.19.4 stty add RS485 config options
[LINUX] 2.6.35: Add OneWire GPIO Bus Master Device to APF28DEV
[BUILDROOT] 2012.02: BusyBox coreutils stty: Add RS485 config options
[BUILDROOT] 2013.02: BusyBox: Fix daily snapshot config file
[BUILDROOT] 2013.02: BusyBox coreutils stty: Add RS485 config options
[BUILDROOT] 2013.02: update Buildroot cleanuop script
[BUILDROOT] Busybox coreutils stty and RS485 patch fix for Buildroot 2013.05
[BUILDROOT] 2013.05: Add joe packege
Jeremie Scheer (13):
[BUILDROOT] Add package CUnit in patch 197.
[BUILDROOT] Add package qextserialport.
[BUILDROOT] Update Qt's FTP URL in patch 132.
[BUILDROOT] Update Qwt patch 133 to version 6.0.1 with BR mainline patch.
Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
[BUILDROOT] Map Keys Meta and Menu in Qt QWS Server's keyboard maps.
[BUILDROOT] Fix IW package download URL in patch 200.
[BUILDROOT] Use generic kernel mirror in IW download URL (patch 200).
Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
[BUILDROOT] Update QT sources URL.
[BUILDROOT] Fix Marble package compilation.
[BUILDROOT] Add package Poppler for Qt.
[BUILDROOT] Fix Cups and Fbgrab site URLs.
Julien Boibessot (121):
[LINUX] 3.6: APF28, fixes NAND partitions size
[DEMOS] capture: fixes soft rgb565_to_yuv420 conversion
[LINUX] APF28: 3.6.2 kernel version is out
[LINUX] APF27 / 3.6: fixes net devices support in default config
[LINUX] APF28: remove 3.4 support, APF27: move 3.4 support to 3.7-rc4
[LINUX] APF27: remove 3.5 support
[LINUX] APF27: remove 3.7-rc3 support
[LINUX] APF27: remove 3.6 support (default experimental one in now 3.7)
[LINUX] Remove 3.4 support
Linux configs are symlinks
[LINUX] Removes 3.6 support (now default experimental kernel is 3.7)
We don't want DOS format on text files
[LINUX] renamed patches/linux/3.7/200-armadeus-add_apf27_module.patch
Merge branch 'master' of ssh://armadeus.git.sourceforge.net/gitroot/armadeus/armadeus
[U-BOOT] 2012.10: remove : character in patches name
[LINUX] 3.7: Add (incomplete) minimal APF27Dev support (non DT)
Revert commit 01aa78625af2fa48c062bac12c0167ab7c430f2b
[BUILDROOT] 2012.02: Add compat-wireless package (experimental)
[BUILD] Refine some APF28 specific hacks in scripts/quiltify.sh
[TOOLS] (Minor) Fix of uboot_recover instructions on APF27 & APF9328 (U-Boot filename)
[BUILDROOT] 2012.02: Improves 199-compat-wireless-add_package.patch
[BUILD] Fixes make linux-clean target
[BUILDROOT] 2012.02: Fixes compat-wireless continuous rebuild
[BUILDROOT] 2012.02: compat-wireless: makes 2012-11-18 patches only apply when 2012-11-18 version is selected
[LINUX] APF28 : add support for 3.8-rc1 kernel (experimental)
[LINUX] APF27: add support for 3.8-rc1 kernel
[LINUX] APF27/28/9328: bump Linux 3.7 support to 3.7.1
[LINUX] 3.7: fixes build of recent commits and rename some patches
[LINUX] 3.7: add some FPGA drivers to default config and fixes build
[LINUX] 3.8: APF27: improve FPGA related drivers support
[LINUX] 3.8 : Add (non working) APF51 DT support
[LINUX] Fixes target/linux/modules/pwm/pwm.c build with recent kernels
[LINUX] 3.8 : APF51 : Fixes NAND ECC/OOB/BBT to be compatible with older kernels
[LINUX] 3.7: fixes build of fpgaloader
[LINUX] 3.8: bump to 3.8-rc2 (experimental)
Fixes comments
[TEST] Fixes mplayer test on APF28 (thanks Nouchi)
[LINUX] 3.8: APF51: fix default config so that DTB is bootable
[LINUX] 3.8: move rc2 support to rc4
[BUILD] Add a comment to armadeus_env.sh generated file
[LINUX] Move 3.7 support to 3.7.4
[LINUX] 3.x: Add Armadeus boot logo support (create patches/linux/common/ for this purpose)
[LINUX] 3.0: 3.0.33 is the latest APF51 validated kernel so move to it
[TEST] Fixes RTC test
[TEST] Makes RS232 test a little more generic
[TEST] Makes test_backlight.sh works on recent kernels (APF27/APF9328)
[DEBUG] imx5regs: add M4IF_CR register
[LINUX] 3.7: APF27: fixes kernel oops when rebooting after LCD timed out
[TEST] Makes test_wifi.sh a little more generic
[LINUX] 3.7: 3.7.5 is out so move to it
[BUILDROOT] target_skeleton/etc/inittab: deactivate by default the login and log on LCD. User can activate them after boot if needed.
[LINUX] 3.8: 3.8-rc6 is out
[AS_DEVICES] Fixes some build warnings (and indentation while we are at it)
[AS_DEVICES] Fixes C++ wrapper installation (to have .hpp in staging/ under Buildroot)
[BUILD] Fixes quiltify for U-Boot
[LINUX] 3.7.6 is out
[LINUX] 3.7: move to 3.7.9
Typo
[LINUX] Fixes fpga_irq_mngr build with 3.7.9+ kernels
[LINUX] 3.8 is out
[LINUX] Fixes Armadeus custom PWM driver build with recent kernels
[TEST] Factorize PWM test instructions and make it usable on non APFxxDev platforms
[LINUX] 3.7/3.8: we do not use JFFS2 on APF28
[LINUX] 2.6.38: fixes PMIC LEDs colour declaration on APF51Dev
[TESTS] Makes test_backlight usable on custom APF platforms
[DEBUG] imx28regs: add PWM registers
[LINUX] 3.8: all boards: add possibility to use 3.8.4 kernel
[BUILDROOT] Fixes 2012.02 build due to gnokii package recent adding and makes this package also available for 2013.02
[BUILDROOT] 2012.02: add a fix to allow kernel+initrd image generation
[LINUX] 3.8: move to 3.8.6
[LINUX] Fixes some FPGA drivers build with 3.8+ kernels
[LINUX] 3.8: allows i.MX28 RTC to wakeup the system if powered with battery
[SCRIPTS] Small fix in quiltify.sh
[BUILDROOT] 2012.02: Add (preliminary) support for smstools3
[BUILDROOT] 2013.02: fixes gnokii package
[BUILDROOT] 2012.02: Add opkg package manager (BR mainline backport)
[TEST] Improve media_perf.sh to be called by non-root user and generate a report file
[TEST] Fixes call to media_perf in test_release
[TEST] Add test helpers to echo in red/green/bold
[DEBUG] Add a version number to imxregs
[BUILDROOT] 2011.02: makes imx-lib compile again (vpu only) on i.MX27
[BUILDROOT] 2013.05: port armadeus modifications to imx-lib
[LINUX] 3.4: re-introduce 3.4 Linux support (for APF28 only), to have a xenomai working version on APF28.
[LINUX] 3.4: add spidev on SPI2 of APF28Dev
[BUILDROOT] 2013.05: ltrace: fix download URL
[BUILDROOT] 2013.05: ti-utils: fix github tarball to use commit id (backport from BR mainline)
[BUILDROOT] 2013.05: add SMS Server Tools 3 package
[LINUX] 3.4: Add 3.4.6 support to APF28 to have a Xenomai ready configuration
[BUILDROOT] gpsd: add the possibility to define other options than serial device.
[LINUX] 3.11: move APF51 experimental support to 3.11-rc4
[BUILDROOT] Add patch to allow 3.10+ kernels compilation with uClibc 0.9.33.2
[BUILDROOT] [2013.05] Fixes patch 201 (gnokii)
[TOOLS] Allow to export linux config to a given filename
[LINUX] 3.7 : apf27 : Makes FPGA and armadeus custom drivers compiles better with 3.7+ kernels
[BUILDROOT][2013.05] Makes sdl_water package compiles again
[BUILDROOT][2013.05] Remove obsolete allegro patch, as we won't support this package anymore (in short term)
[BUILDROOT][2013.05] fpga_firmware: add some precisions to help (more than one FPGA firmware can be installed at a time in linux rootfs) and fixes a bug for FPGA symlink in output/images/
[BUILDROOT][2013.05] Fixes slideshow package compilation
[BUILDROOT][2013.05] Fixes gpm package compilation
[BUILDROOT][2013.05] Fixes wolf4sdl compilation
[BUILDROOT] [2013.05] Fixes snes9x compilation
[BUILDROOT][2013.05] Fixes opentyrian build
[BUILDROOT][2013.05] Fixes lbreakout2 build
[BUILDROOT][2013.05] Fixes ltris build
[BUILDROOT][2013.05] Fixes madplay build
[BUILDROOT] Add a config to build Linux 3.11/mainline based APF51 system
[BUILDROOT][2013.05] Fixes pywebradio package installation
[BUILDROOT][2013.05] Mark patches 211 as a BR upstream one
[BUILDROOT][2013.05] Makes initrd generation works again with armadeus adaptations to BR
[BUILDROOT][2013.05] Remove hacks to rename rootfs images and use BR normal way of doing it
[U-BOOT] 2012.04: fixes comment when flashing dtb
[BUILDROOT] 2013.05: busybox: fixes an ifplugd problem with recent Linux kernels
[LINUX] Common: Makes mcp7940x RTC driver also works on recent kernels
[LINUX] 3.11: Add support for mcp7940x RTC
[LINUX] Add possibility to use 3.11.3 kernels on APF51
[LINUX] [COMMON] Makes mcp7940x RTC driver compiles again on non device tree kernels
[LINUX] [3.11+] APF51: makes OTG USB port work better.
[BUILDROOT] apf51mainline_defconfig: move to 3.11.6 kernel
[LINUX] [3.11+] APF51: Add possibility to declare UART1 pins without CTS/RTS
[LINUX] All: 3.11.7 -> 3.11.8
[BUILDROOT] APF51: 3.11.8 is now the default kernel for apf51mainline_defconfig
Nicolas Colombain (2):
[DEBUG] imxregs: Add i.MX28 RTC registers
[UBOOT] fix FPGA programming hang up
Philippe Reynes (52):
apf27: add kernel configuration for linux 3.6
apf27: add support for kernel 3.6.3
[UBOOT] APF27: 2012.10: refactor U-Boot patches to be pushed on the U-Boot mainline - Thanks Trem
kernel: add support for the kernel 3.7-rc3
Add device tree file for the armadeus apf27
update apf27 kernel 3.7 patch to v4
Add support of linux-3.7-rc6
[LINUX] apf27: add support of kernel 3.7-rc7
apf27: add support of kernel 3.7-rc8
apf27: add configuration for linux 3.9-rc2
apf27: update linux config to 3.9-rc4
[LINUX] 3.8: APF27: move 3.8.6 to 3.8.13
[LINUX] 3.8: fix network declaration on dts
[LINUX] port 3.8 patches to 3.9
[LINUX] 3.9: add support of the 3.9.3
[LINUX] 3.9: add support of the 3.9.4
[LINUX] apf27: 3.10: move to 3.10-rc5
[LINUX] apf27: 3.9: move to 3.9.6
[LINUX] 3.10: apf27: move to 3.10-rc6
[LINUX] 3.10: apf27dev: add rtc ds1374 to the dts
[LINUX] apf27: 3.9: move to 3.9.7
[LINUX] 3.10: imx27: fpga: define base addr even with dt
[LINUX] 3.10: imx27: fpga_loader: add support of 3.10
[LINUX] 3.10: enable driver fpga_loader
[LINUX] 3.10: move to 3.10-rc7
[LINUX] 3.9: move to 3.9.8
[LINUX] 3.9: move to 3.9.9
[LINUX] 3.9: move to 3.9.10
[LINUX] 3.10: move to 3.10 (remove 3.10-rc7)
[LINUX] 3.10: move to 3.10.1
[LINUX] 3.11: move to 3.11-rc1
[LINUX] 3.11: move to 3.11-rc2
[LINUX] 3.10: move to 3.10.3
[LINUX] 3.11: move to 3.11-rc3
[LINUX] 3.10: move to 3.10.5
[LINUX] 3.10: move to 3.10.6
[LINUX] 3.10: move to 3.10.7
[LINUX] 3.10: move to 3.10.10
[LINUX] 3.11: remove 3.11-rc4
[LINUX] 3.10: move to 3.10.11
[LINUX] 3.11: move to 3.11.1
[LINUX] 3.10: move to 3.10.12
[LINUX] 3.11: move to 3.11.2
[LINUX] 3.10: move to 3.10.14
[LINUX] 3.10: move to 3.10.15
[LINUX] 3.11: apf27: move to 3.11.4
[LINUX] 3.10: apf27: move to 3.10.16
[LINUX] 3.11: apf27: move to 3.11.6
[LINUX] 3.10: move to 3.10.17
[LINUX] 3.10: move to 3.10.18
[LINUX] 3.11: move to 3.11.7
[LINUX] 3.12: move to 3.12
Samuel Martin (4):
[BUILDROOT] 2012.11: clean-up for BR upstream integration. Thx Smartin
[BUILDROOT] 2012.11: clean-up openobe and ussp-push for BR upstream integration. Thx Smartin
[BUILDROOT] 2012.11: clean-up URG package for BR upstream integration. Thx Smartin
[BUILDROOT] 2012.11: clean-up package libcanfestival for BR upstream integration. Thx Smartin
Sebastien Royen (2):
[as_devices] add fake_root via AS_DEVICES_ROOT env variable (use to
[as_devices] add basic power_supply interface (limited)
Sébastien SZYMANSKI (2):
[APF51][LINUX 3.10] Add backlight to device tree
Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
Thomas Chardin (1):
[BUILDROOT] Fixes freescale-tools build
Victor Hiairrassary (7):
Copy and paste this patch for the actual linux release
Add support for armadeus drivers on current linux release
Linux 3.7 is out, so remove symlinks related to linux 3.7-rc*
[LINUX] cleanup custom Armadeus drivers config and make fpgaloader compiles again on > 3.7
0.9.33: add backtrace support in default config
boost: bump version to 1.53.0
xenomai: bump to version 2.6.2.1
seb (7):
[BUILDROOT] as_devices_cpp could be build with external toolchain
[as_devices] complete i2c_eeprom capabilities
Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
[as_devices] add as_led : basic support for leds
Merge branch 'master' of ssh://git.code.sf.net/p/armadeus/code
[as_devices] add iio bus for adc + backlight not limited to imx-bl
[as_devices] fix as_backlight sys access
vic...@gm... (1):
boost: bump to version 1.52.0
-----------------------------------------------------------------------
hooks/post-receive
--
armadeus
|
