Hi Jon
Please try1757 just posted.
Previous was generating an error for first time install only, its fixed. Users installing over old versions would never get this error, but all good to go.
Cheers
Robert
Last edit: brownrb 2016-06-04
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello Robert,
First of all I want to thank you and congratulate you for sharing this excellent project
recently we finished building our focuser based on FOCUSERV144IR_DRV8825_F version, everything works perfect except the acquisition of the temperature is always mark 20 degrees, the dallas sensor is ok, because I tried it with another circuit and works fine
Thanks a lot!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi Robert,
I read the firmware Changlog and I have the answer of my question, but I need to download the v1.45_XXX 30082015 version and I don´t find to make some test
I try to instal the last version but I have problems with the drivers
thanks
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi
email me at nnnnnnnnnnnnn and I will work with you to resolve any issues you have. I do recommend starting with the latest firmware, and latest windows app.
Please uninstall all myfocuser drivers and applications first, restart the computer, then install the new ones.
I will need to know the nature of the problem, the firmware filename you are using and the Windows app version (which I will asssume to be the latest). If you email me the firmware file you have uploaded to your focuser that can be a big help/
Also I will assume that you have installed the LCD library (see LCD library Issues) and that you are using Arduino Version 1.6.4 of the compiler.
Looking forward to resolving your issues
Robert
Last edit: brownrb 2016-06-09
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi
Symatec is using a false positive on the Windows file. There is no malicious code or adware in the application. Symatec does this when the number of users are small. The windows application zip file can be sent by you to symatec for clearing so that it no longer is flagged by Symatec, the procedure is on this link. I cannot do that as I so not use symatec for virus protection. One needs a symatec account in order to submit programs for review. There is no charge for this service (other than having a paid subscription)
Hi Jon
Please try1757 just posted.
Previous was generating an error for first time install only, its fixed. Users installing over old versions would never get this error, but all good to go.
Cheers
Robert
Last edit: brownrb 2016-06-04
Hello Robert,
First of all I want to thank you and congratulate you for sharing this excellent project
recently we finished building our focuser based on FOCUSERV144IR_DRV8825_F version, everything works perfect except the acquisition of the temperature is always mark 20 degrees, the dallas sensor is ok, because I tried it with another circuit and works fine
Thanks a lot!
Hi Robert,
I read the firmware Changlog and I have the answer of my question, but I need to download the v1.45_XXX 30082015 version and I don´t find to make some test
I try to instal the last version but I have problems with the drivers
thanks
Hi
email me at nnnnnnnnnnnnn and I will work with you to resolve any issues you have. I do recommend starting with the latest firmware, and latest windows app.
Please uninstall all myfocuser drivers and applications first, restart the computer, then install the new ones.
I will need to know the nature of the problem, the firmware filename you are using and the Windows app version (which I will asssume to be the latest). If you email me the firmware file you have uploaded to your focuser that can be a big help/
Also I will assume that you have installed the LCD library (see LCD library Issues) and that you are using Arduino Version 1.6.4 of the compiler.
Looking forward to resolving your issues
Robert
Last edit: brownrb 2016-06-09
Hi
Symatec is using a false positive on the Windows file. There is no malicious code or adware in the application. Symatec does this when the number of users are small. The windows application zip file can be sent by you to symatec for clearing so that it no longer is flagged by Symatec, the procedure is on this link. I cannot do that as I so not use symatec for virus protection. One needs a symatec account in order to submit programs for review. There is no charge for this service (other than having a paid subscription)
https://support.symantec.com/en_US/article.TECH102419.html
Cheers
Robert