26-03-2023
I have uploaded a zip file concerning the calculation of Critical Focus Zone, with a client exercise. This is suitable for refractors and newtonians.
Nextion tft file myFocuserPro2N06.tft will not load on new NX4832K035_011 device.
Error message indicates "File version too low". It looks like this resource must be created with the Nextion editor version v1.63.3 or later
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Robert,
Thanks for the Nextion display tft firmware update. This does resolve the issue loading firmware onto the Nextion display. The Nextion FAQ page explains why this is necessary for the newer devices and includes a notice with the device that the editor version be 1.63 or above.
Thanks for all your work on this amazing project.
Regards,
Dave
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi Dave
I have not kept up with the FAQ for Nextion - as you can see, I get kept more than busy on other projects. My display I bought back some time ago, and still prefer it to all but the key matix focuser I have. So its firmware I guess is pretty old, but still chugging along fine.
regards
Robert
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
07-May-2023
I am working on the next firmware release which will be 326.
Also, the myFP2 Mini application has been completely rewritten and will be available soon. (some screen shots attached)
The current myFP2 Windows app (larger version) will also be updated at the same.
If interested in testing any of these, please send me an email to the gmail address in the pdf etc.
Also in this folder are some DIY PCB for those that would make their own board. If anyone wants the PDF files to make their own board, just ask via email. They are not here because of the file sizes involved.
Regards
Robert
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
27-05-2023
Information:
Slotted to release very soon are the following
Firmware 326 (myFP2, myFP2M and myFP2N)
Add Number of display pages to serialcomms.h
Rewrite logic for Home Position
Fix compiler error for Defines file (Linux)
Fix for NOKIA displays
Fix for incorrect data on LCD2004 (Philippe)
Fix for HomePositionSwitch lag time in updating hpsw state
Fix invalid display checks
Windows Application 2500
Add update Position when moving
Add Japanese Language
Update language messages
Update language labels for every control on every tab
Fix for Jogging not stopping on Mouse Up
Fix for Keymap Clear not working correctly
Windows Mini Application 2402
2.4.0.2
Fix Relative Move not moving x2 when step double is enabled
Change name to myFP2Mini
2.4.0.1 09-05-2023
Remove test code re Regional Locale
2.4.0.0 08-05-2023
Major update
New Guid
Add tab control, remove extra settings form
Change control placement on tabs
Rewrite code that handles controller comms and updating ofsettings/values
Rewrite Settings menu
Change LogFile extensions to txt
Locale Regional settings applies to StepSize, Temperature Offset and writing to log files.
ASCOM DRIVER v300
Language support updated
Add Japanese Language
Add support for Profiles
Update language messages
Regional Locale changes
Improvements to Layout and arrangement of SetupDialog controls
Updated PDF
regards
Robert
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
WARNING
This is a major update. The update is designed to work with Firmware v328 and has not been tested on older firmware.
Use Control Panel to remove the current ASCOM drivers for myFP2 (myFocuserPro2)
After removing your current ASCOM driver,
please check that there are no left over files for myFocuserPro2 (or the myFP2 folder) at this location
C:\Program Files (x86)\Common Files\ASCOM\Focuser
If there are, delete them.
To install these run the .exe installer. If you are only using 1 ASCOM driver run the myFP2ASCOMSetup300.exe installer.
Regards
Robert
300 27-May-2023
Language support updated
Add Japanese Language
Add support for Profiles
Update language messages
Regional Locale changes
Improvements to Layout and arrangement of SetupDialog controls
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
This is a major update. The update is designed to work with Firmware v328 and has been minimally tested on older firmware. There are significant code changes to these applications.
Use Control Panel to remove the current Windows Applications
The PDF guide for the Mini Application is now in a separate document.
Regards
Robert
myFP2 Windows Application
Copyright R Brown, 2014-2023
All Rights Reserved
Permission is granted for personal and Academic/Educational use only.
2.5.0.4 05-Jun-2023
Fix for Preset tab, CurrentPos not working
Fix for Preset tab, Go not working
Add to Preset tab, Focuser Position value
2.5.0.3 30-May-2023
Fix for Step Mode showing invalid values on FocuserTab
Fix for Normal-Double steps, not setting move buttons correctly
2.5.0.2 30-May-2023
Fix for motor speed
2.5.0.1 29-May-2023
Public Release
2.4.9.6 20-May-2023
Add update Position when jogging
Add Japanese Language
Update language messages
Update language labels for every control on every tab
Fix for Jogging not stopping on Mouse Up
Fix for Keymap Clear not working correctly
2.4.9.5 21-Apr-2023
Fix for Temperate Conmpensation Enable (Philippe)
Fix for TempOffsetvalue being set to that of Step Size
Rewrite Temperature, Temperature Offset, Stepsize to handle Windows Locale correctly
2.4.9.4 18-Apr-2023
Fix for stepsize locale error
2.4.9.3 21-03-2023
Add Key mappings tab
2.4.9.2 17-030203
Rewrite error handling code
Remove pesky pop-ups when comms error occurs
Rewrite get temperature code
Rewrite all comms code to match new comms handler
myFP2Mini Windows Application ChangeLog
Robert Brown 2014-2023. All Rights Reserved.
Permission is granted for personal and Educational/Academic use only.
Application Changes
2.4.0.6 05-June-2023
Fix for Preset tab, CurrentPos not working
Fix for Preset tab, Go not working
Add to Preset tab, Focuser Position value
2.4.0.5 03-June-2023
Add Jog Control to Focuser tab
2.4.0.4 31-May-2023
Deprecate Change in Step Mode warning from Settings menu
Deprecate Number of Steps to Move from Settings menu
Public Release
2.4.0.3 29-May-2023
Add Profiles Load/Save/Send
Change layout on Focuser tab
Change layout on Connection tab
2.4.0.2 28-May-2023
Fix Relative Move not moving x2 when step double is enabled
Change name to myFP2Mini
2.4.0.1 09-05-2023
Remove test code re Regional Locale
2.4.0.0 08-05-2023
Major update
New Guid
Add tab control, remove extra settings form
Change control placement on tabs
Rewrite code that handles controller comms and updating ofsettings/values
Rewrite Settings menu
Change LogFile extensions to txt
Locale Regional settings applies to StepSize, Temperature Offset and writing to log files.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
There are significant code changes to this firmware. Please do not use this firmware
with older Windows apps and ASCOM Drivers. Please use the NEW Windows apps
and ASCOM drivers uploaded today.
WARNING
Before installing this new firmware update, please run the program ClearEEPROM
to erase any saved data.
Warning
Please run the ClearEEPROM test program before using the 328 firmware. You may get strange results if you do not. Remember to save or write down your focuser settings before running ClearEEPROM. as all the focuser settings in EEPROM will be wiped.
CHANGES
328 06-Jun-2023
Fix for display initialisation
327 30-May-2023
Clean up code in loop()
Change LED mode when moving
Rewrite portions of Motor control code myBoards.cpp
Rewrite Push Button code
Except myFP2F_TMC2209SG_327 and myFP2F_TMC2225_327 [Software Serial clash]
Fix for get stepmode
Fix for Write EEPROM
Fix for Delay After Move
Deprecate delayeddisplayupdatestatus
326 05-May-2023
Add Number of display pages to serialcomms.h
Rewrite logic for Home Position
Fix compiler error for Defines file (Linux)
Fix for NOKIA displays
Fix for incorrect data on LCD2004 (Philippe)
Fix for HomePositionSwitch lag time in updating hpsw state
Fix invalid display checks
325-3 27-03-2023
Add A4998 GSC firmware
325-2 26-03-2023
Fix for ULN2003 firmware compiler error no endif
Last edit: brownrb 2023-06-11
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
11-Jun-2023
There has been a report (thanks Erik for the heads-up) that to install the new Windows App you might need to stop Norton anti-virus. Rest assured there is no virus in the application; it is a one-click application created with VS 2022 using the same certificate credentials as previously (all my apps use the same credentials).
As background
I changed the GUID in this release, so if you could not un-install the previous version you should still be able to install this one. Please be aware that the new app will not be installed in the same place as before (AppData folder) - not my doing - Windows is in control of that.
The other change is that all apps and ascom drivers henceforth use Framework 4.8 as a prequisite (previous was 4.5.1 Client). The reason for this change has to do with ASCOM.
regards
Robert
Last edit: brownrb 2023-06-11
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
10-Sep-2023
A new update for the Windows application.
v2507
Fix for Temperature coefficient not setting correct value.
When the temperature coefficient was set on the Temp tab, the value was not sent to the controller correctly when the Set button is clicked.
11-Sep-2023
A new update for the Windows application.
v2508
2.5.0.8 10-Sep-2023
Fix for Set Temp Comp State when controller does not support temperature probe.
The application was not updating its own settings after sending the request to change the temp compensation state in the controller.
0011-1 18-Sep-2023
Fix for tempoffset and stepsize - could not enter float value
Fix for wrong error log messages
Fix for GetFirmwareBtn not parsing focuser response correctly
Fix for GetTemperatureButtonClick not parsing focuser response correctly
Increase text font sizes for better readability
Rename Main tab as Focuser tab
Minimize text in form title bar
Regards
Robert
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
26-03-2023
I have uploaded a zip file concerning the calculation of Critical Focus Zone, with a client exercise. This is suitable for refractors and newtonians.
Critical-Focus-Zone-Exercise.zip
Found in Files / Documents
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Critical-Focus-Zone-Exercise.zip/download
Regards
Robert
Nextion tft file myFocuserPro2N06.tft will not load on new NX4832K035_011 device.
Error message indicates "File version too low". It looks like this resource must be created with the Nextion editor version v1.63.3 or later
Hi David
Not sure what you mean by NX4832K035_011 device?
Please try attached generated with 1.65.1
regards
Robert
Robert,
Thanks for the Nextion display tft firmware update. This does resolve the issue loading firmware onto the Nextion display. The Nextion FAQ page explains why this is necessary for the newer devices and includes a notice with the device that the editor version be 1.63 or above.
Thanks for all your work on this amazing project.
Regards,
Dave
Dave
Did you find out if there was a way to update the firmware of the Nextion display?
I looked through the pages/faq but did not find it.
regards
Robert
Hi Dave
In the nextion 328 update I have also provided an update to the Nextion tft file (07)
Regards
Robert
Hi Dave
I have not kept up with the FAQ for Nextion - as you can see, I get kept more than busy on other projects. My display I bought back some time ago, and still prefer it to all but the key matix focuser I have. So its firmware I guess is pretty old, but still chugging along fine.
regards
Robert
07-May-2023
I am working on the next firmware release which will be 326.
Also, the myFP2 Mini application has been completely rewritten and will be available soon. (some screen shots attached)
The current myFP2 Windows app (larger version) will also be updated at the same.
If interested in testing any of these, please send me an email to the gmail address in the pdf etc.
regards
Robert
08-May-2023
For those that no not use PCB, I have updated all the available stripboards. The location is the same, which is
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/STRIPBOARDS/
Also in this folder are some DIY PCB for those that would make their own board. If anyone wants the PDF files to make their own board, just ask via email. They are not here because of the file sizes involved.
Regards
Robert
27-05-2023
Information:
Slotted to release very soon are the following
Firmware 326 (myFP2, myFP2M and myFP2N)
Add Number of display pages to serialcomms.h
Rewrite logic for Home Position
Fix compiler error for Defines file (Linux)
Fix for NOKIA displays
Fix for incorrect data on LCD2004 (Philippe)
Fix for HomePositionSwitch lag time in updating hpsw state
Fix invalid display checks
Windows Application 2500
Add update Position when moving
Add Japanese Language
Update language messages
Update language labels for every control on every tab
Fix for Jogging not stopping on Mouse Up
Fix for Keymap Clear not working correctly
Windows Mini Application 2402
2.4.0.2
Fix Relative Move not moving x2 when step double is enabled
Change name to myFP2Mini
2.4.0.1 09-05-2023
Remove test code re Regional Locale
2.4.0.0 08-05-2023
Major update
New Guid
Add tab control, remove extra settings form
Change control placement on tabs
Rewrite code that handles controller comms and updating ofsettings/values
Rewrite Settings menu
Change LogFile extensions to txt
Locale Regional settings applies to StepSize, Temperature Offset and writing to log files.
ASCOM DRIVER v300
Language support updated
Add Japanese Language
Add support for Profiles
Update language messages
Regional Locale changes
Improvements to Layout and arrangement of SetupDialog controls
Updated PDF
regards
Robert
07-Jun-2023
Released today
myFP2 PDF v328
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/myFP2-328.pdf/download
myFP2M Ready Made Controller PDF v328
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2M/myFocuserPro2M-UserManual-327.pdf/download
myFP2N Nextion PDF 328
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2N%20NEXTION%20TFT%20DISPLAY/myFP2N-Nextion-328.pdf/download
myFP2 Protocol v327
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/myFP2%20Comms%20Protocol%20327.pdf/download
Regards
Robert
Last edit: brownrb 2023-06-06
07-Jun-2023
NEW ASCOM DRIVERS
WARNING
This is a major update. The update is designed to work with Firmware v328 and has not been tested on older firmware.
Use Control Panel to remove the current ASCOM drivers for myFP2 (myFocuserPro2)
After removing your current ASCOM driver,
please check that there are no left over files for myFocuserPro2 (or the myFP2 folder) at this location
C:\Program Files (x86)\Common Files\ASCOM\Focuser
If there are, delete them.
I have uploaded the following,
ASCOM Driver v300
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/ASCOM%20DRIVERS/myFP2ASCOMSetup300.exe/download
ASCOM1 Driver v300
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/ASCOM%20DRIVERS/myFP2ASCOM1Setup300.exe/download
To install these run the .exe installer. If you are only using 1 ASCOM driver run the myFP2ASCOMSetup300.exe installer.
Regards
Robert
300 27-May-2023
Language support updated
Add Japanese Language
Add support for Profiles
Update language messages
Regional Locale changes
Improvements to Layout and arrangement of SetupDialog controls
07-Jun-2023
NEW WINDOWS APPLICATIONS
WARNING
This is a major update. The update is designed to work with Firmware v328 and has been minimally tested on older firmware. There are significant code changes to these applications.
Use Control Panel to remove the current Windows Applications
I have uploaded the following,
Windows Application v2.5.0.4
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/WINDOWS/MainApp/myFocuserPro2_2_5_0_4.zip/download
Windows Mini Application v2.4.0.6
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/WINDOWS/MiniApp/myFP2Mini_2_4_0_6.zip/download
Windows Mini Application User Guide PDF v327.2
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/WINDOWS/MiniApp/myFP2Mini_User_Guide-327-2.pdf/download
To install the applications installer
The PDF guide for the Mini Application is now in a separate document.
Regards
Robert
myFP2 Windows Application
Copyright R Brown, 2014-2023
All Rights Reserved
Permission is granted for personal and Academic/Educational use only.
2.5.0.4 05-Jun-2023
Fix for Preset tab, CurrentPos not working
Fix for Preset tab, Go not working
Add to Preset tab, Focuser Position value
2.5.0.3 30-May-2023
Fix for Step Mode showing invalid values on FocuserTab
Fix for Normal-Double steps, not setting move buttons correctly
2.5.0.2 30-May-2023
Fix for motor speed
2.5.0.1 29-May-2023
Public Release
2.4.9.6 20-May-2023
Add update Position when jogging
Add Japanese Language
Update language messages
Update language labels for every control on every tab
Fix for Jogging not stopping on Mouse Up
Fix for Keymap Clear not working correctly
2.4.9.5 21-Apr-2023
Fix for Temperate Conmpensation Enable (Philippe)
Fix for TempOffsetvalue being set to that of Step Size
Rewrite Temperature, Temperature Offset, Stepsize to handle Windows Locale correctly
2.4.9.4 18-Apr-2023
Fix for stepsize locale error
2.4.9.3 21-03-2023
Add Key mappings tab
2.4.9.2 17-030203
Rewrite error handling code
Remove pesky pop-ups when comms error occurs
Rewrite get temperature code
Rewrite all comms code to match new comms handler
myFP2Mini Windows Application ChangeLog
Robert Brown 2014-2023. All Rights Reserved.
Permission is granted for personal and Educational/Academic use only.
Application Changes
2.4.0.6 05-June-2023
Fix for Preset tab, CurrentPos not working
Fix for Preset tab, Go not working
Add to Preset tab, Focuser Position value
2.4.0.5 03-June-2023
Add Jog Control to Focuser tab
2.4.0.4 31-May-2023
Deprecate Change in Step Mode warning from Settings menu
Deprecate Number of Steps to Move from Settings menu
Public Release
2.4.0.3 29-May-2023
Add Profiles Load/Save/Send
Change layout on Focuser tab
Change layout on Connection tab
2.4.0.2 28-May-2023
Fix Relative Move not moving x2 when step double is enabled
Change name to myFP2Mini
2.4.0.1 09-05-2023
Remove test code re Regional Locale
2.4.0.0 08-05-2023
Major update
New Guid
Add tab control, remove extra settings form
Change control placement on tabs
Rewrite code that handles controller comms and updating ofsettings/values
Rewrite Settings menu
Change LogFile extensions to txt
Locale Regional settings applies to StepSize, Temperature Offset and writing to log files.
07-Jun-2023
myFP2 NEW FIRMWARE
WARNING
There are significant code changes to this firmware. Please do not use this firmware
with older Windows apps and ASCOM Drivers. Please use the NEW Windows apps
and ASCOM drivers uploaded today.
WARNING
Before installing this new firmware update, please run the program ClearEEPROM
to erase any saved data.
ARDUINO FIRMWARE v328
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/ARDUINO%20FIRMWARE/
Regards
Robert
07-Jun-2023
myFP2M NEW FIRMWARE
For myFP2M ready made controllers ONLY.
Do not program a myFP2M controller with the main firmware.
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2M/Arduino%20Firmware%20for%20myFP2M%20Prebuilt%20Controllers%20Only/
WARNING
Before installing this new firmware update, please run the program ClearEEPROM
to erase any saved data.
myFP2M USER GUIDE
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2M/myFocuserPro2M-UserManual-327.pdf/download
ASCOM Drivers
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/ASCOM%20DRIVERS/
WINDOWS
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/WINDOWS/
Regards
Robert
07-Jun-2023
myFP2N NEXTION NEW FIRMWARE
For myFP2N Nextion conrollers ONLY.
Do not program a myFP2N Nextion controller with the main firmware.
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2N%20NEXTION%20TFT%20DISPLAY/Firmware_myFP2N_328.zip/download
WARNING
Before installing this new firmware update, please run the program ClearEEPROM
to erase any saved data.
myFP2N NEXTION GUIDE
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2N%20NEXTION%20TFT%20DISPLAY/myFP2N-Nextion-328.pdf/download
ASCOM Drivers
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/ASCOM%20DRIVERS/
WINDOWS
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/WINDOWS/
Regards
Robert
07-06-2023
Please look at this thread (messages above) for todays uploads
myFP2
myFP2M Ready Made Controllers
myFP2N Nextion Controller
ASCOM Updates
Firmware Updates
Windows Updates
11-Jun-2023
myFP2 NEW FIRMWARE 328
Warning
Please run the ClearEEPROM test program before using the 328 firmware. You may get strange results if you do not. Remember to save or write down your focuser settings before running ClearEEPROM. as all the focuser settings in EEPROM will be wiped.
myFP2 Firmware 328
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/ARDUINO%20FIRMWARE/Firmware_myFP2_328.zip/download
myFP2M Readymade Firmware 328
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2M/Arduino%20Firmware%20for%20myFP2M%20Prebuilt%20Controllers%20Only/Firmware_myFP2M_328.zip/download
myFP2N Nextion Firmware 328
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2N%20NEXTION%20TFT%20DISPLAY/Firmware_myFP2N_328.zip/download
regards
Robert
CHANGES
328 06-Jun-2023
Fix for display initialisation
327 30-May-2023
Clean up code in loop()
Change LED mode when moving
Rewrite portions of Motor control code myBoards.cpp
Rewrite Push Button code
Except myFP2F_TMC2209SG_327 and myFP2F_TMC2225_327 [Software Serial clash]
Fix for get stepmode
Fix for Write EEPROM
Fix for Delay After Move
Deprecate delayeddisplayupdatestatus
326 05-May-2023
Add Number of display pages to serialcomms.h
Rewrite logic for Home Position
Fix compiler error for Defines file (Linux)
Fix for NOKIA displays
Fix for incorrect data on LCD2004 (Philippe)
Fix for HomePositionSwitch lag time in updating hpsw state
Fix invalid display checks
325-3 27-03-2023
Add A4998 GSC firmware
325-2 26-03-2023
Fix for ULN2003 firmware compiler error no endif
Last edit: brownrb 2023-06-11
11-Jun-2023
There has been a report (thanks Erik for the heads-up) that to install the new Windows App you might need to stop Norton anti-virus. Rest assured there is no virus in the application; it is a one-click application created with VS 2022 using the same certificate credentials as previously (all my apps use the same credentials).
As background
I changed the GUID in this release, so if you could not un-install the previous version you should still be able to install this one. Please be aware that the new app will not be installed in the same place as before (AppData folder) - not my doing - Windows is in control of that.
The other change is that all apps and ascom drivers henceforth use Framework 4.8 as a prequisite (previous was 4.5.1 Client). The reason for this change has to do with ASCOM.
regards
Robert
Last edit: brownrb 2023-06-11
29-Jun-2023
I have uploaded a new Windows app, release 2_5_0_6
This release has fixes for
Profiles
File Save/Restore Focuser Settings
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/WINDOWS/MainApp/
Regards
Robert
10-Sep-2023
A new update for the Windows application.
v2507
Fix for Temperature coefficient not setting correct value.
When the temperature coefficient was set on the Temp tab, the value was not sent to the controller correctly when the Set button is clicked.
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/WINDOWS/MainApp/myFocuserPro2W_2_5_0_7.zip/download
regards
Robert
11-Sep-2023
A new update for the Windows application.
v2508
2.5.0.8 10-Sep-2023
Fix for Set Temp Comp State when controller does not support temperature probe.
The application was not updating its own settings after sending the request to change the temp compensation state in the controller.
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/WINDOWS/MainApp/myFocuserPro2_2_5_0_8.zip/download
This is an application error.
reqards
Robert
11-Sep-2023
Update for myFP2ASCOM Test application
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/ASCOM%20DRIVER%20TESTER/myFP2ASCOMApp_1_3_2_3.zip/download
regards
Robert
20-Sep-2023
New update for myFP2L Linux application source
Version 0011
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/LINUX/
0011-1 18-Sep-2023
Fix for tempoffset and stepsize - could not enter float value
Fix for wrong error log messages
Fix for GetFirmwareBtn not parsing focuser response correctly
Fix for GetTemperatureButtonClick not parsing focuser response correctly
Increase text font sizes for better readability
Rename Main tab as Focuser tab
Minimize text in form title bar
Regards
Robert
17-Oct-2023
Firmware update 329.
myFP2
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/ARDUINO%20FIRMWARE/myFP2-Firmware-329.zip/download
myFP2N
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2N%20NEXTION%20TFT%20DISPLAY/Firmware_myFP2N_329.zip/download
myFP2M
No changes, use Firmware myFP2M v328
Changes
329 09-Oct-2023
Improve hpsw code, move update from loop() to myBoards.cpp
Fix for Compiler warnings
Regards
Robert