[Alsa-user] Edirol UA-1EX help needed
Brought to you by:
perex
From: Jason G. <jga...@la...> - 2008-09-07 17:00:53
|
All, Bought this device, due to the recommendation that it was complete supported. I plugged it and it worked. That's great. However, I want to use the spdif output. I am either at a configuration issue or lack of understanding. This works and comes out the analog RCA: aplay -D default sound.wav aplay -L shows me this: default:CARD=UA1EX UA-1EX, USB Audio Default Audio Device front:CARD=UA1EX,DEV=0 UA-1EX, USB Audio Front speakers surround40:CARD=UA1EX,DEV=0 UA-1EX, USB Audio 4.0 Surround output to Front and Rear speakers surround41:CARD=UA1EX,DEV=0 UA-1EX, USB Audio 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=UA1EX,DEV=0 UA-1EX, USB Audio 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=UA1EX,DEV=0 UA-1EX, USB Audio 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=UA1EX,DEV=0 UA-1EX, USB Audio 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=UA1EX,DEV=0 UA-1EX, USB Audio IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) If I try to put anything out iec958 (aplay -D iec958) I receive this error: aplay: set_params:954: Sample format non available I really do not have an asound.conf or .asoundrc. I've messed with a few for awhile, but I don't seem to be able to do anything with them. Looking for some advice. I'm ultimately trying to accomplish ALL sounds to go out the spdif, and reading a Myth wiki on this. However, I can't even get to the point I can verify spdif. Thanks |