[Alsa-user] Need help with Delta44 + on-board multi setup

[Eric <ef...@ya...>]

Hello,

I am trying to figure out how to create an .asoundrc that will allow me to use Jack in the following manner:

Use my Delta44 (ice1712) card as the primary capture/playback device. Use my on-board Intel 82801 (AudioPCI ?) as a secondary playback device, both of which I want to access through qjackctl at the same time.

I have tried many of the suggested methods using alsa "multi" but without any luck.

I am having a difficult time understanding how to properly do this.

jackd -d alsa -d playback
jackd 0.102.20
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details

JACK compiled with System V SHM support.
loading driver ..
creating alsa driver ... playback|playback|1024|2|48000|0|0|nomon|swmeter|-|32bit
configuring for 48000Hz, period = 1024 frames, buffer = 2 periods
ALSA: no playback configurations available (Invalid argument)
ALSA: cannot configure capture channel
cannot load driver module alsa
no message buffer overruns


Here is some of my setup...

pcm.multi
{
        type multi;
        slaves.a.pcm "hw:0";
        slaves.a.channels 10;
        slaves.b.pcm "hw:1";
        slaves.b.channels 2;

        bindings.0.slave a;
        bindings.0.channel 0
        bindings.1.slave a;
        bindings.1.channel 1
        bindings.2.slave a;
        bindings.2.channel 2
        bindings.3.slave a;
        bindings.3.channel 3
        bindings.4.slave a;
        bindings.4.channel 4
        bindings.5.slave a;
        bindings.5.channel 5
        bindings.6.slave a;
        bindings.6.channel 6
        bindings.7.slave a;
        bindings.7.channel 7
        bindings.8.slave a;
        bindings.8.channel 8
        bindings.9.slave a;
        bindings.9.channel 9

        bindings.10.slave b;
        bindings.10.channel 0;
        bindings.11.slave b;
        bindings.11.channel 1;
}

ctl.multi
{
        type hw;
        card 0;
}

pcm.playback
{
        type route;
        slave.pcm "multi";
        ttable.0.0 1;
        ttable.1.1 1;
        ttable.2.2 1;
        ttable.3.3 1;
        ttable.4.4 1;
        ttable.5.5 1;
        ttable.6.6 1;
        ttable.7.7 1;
        ttable.8.8 1;
        ttable.9.9 1;
        ttable.10.10 1;
        ttable.11.11 1;

}

ctl.playback
{
        type hw;
        card 0;
}

 0 [M44            ]: ICE1712 - M Audio Delta 44
                      M Audio Delta 44 at 0x14c0, irq 18
 1 [I82801AAICH    ]: ICH - Intel 82801AA-ICH
                      Intel 82801AA-ICH with AD1885 at 0x2000, irq 19
 2 [UM2            ]: USB-Audio - UM-2
                      EDIROL UM-2 at usb-0000:00:1f.2-2, full speed

  2:        : timer
  3:        : sequencer
  4: [ 0- 0]: digital audio playback
  5: [ 0- 0]: digital audio capture
  6: [ 0]   : control
  7: [ 2- 0]: raw midi
  8: [ 2]   : control
  9: [ 1- 1]: digital audio capture
 10: [ 1- 0]: digital audio playback
 11: [ 1- 0]: digital audio capture
 12: [ 1]   : control

00-00: ICE1712 multi : ICE1712 multi : playback 1 : capture 1
01-01: Intel ICH - MIC ADC : Intel 82801AA-ICH - MIC ADC : capture 1
01-00: Intel ICH : Intel 82801AA-ICH : playback 1 : capture 1


 
---------------------------------
Need Mail bonding?
Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users.