Re: [Alsa-user] SB audigy SE support?

[<ch...@fr...>]

Selon ch...@fr...:

> Quoting James Courtier-Dutton <jam...@gm...>:
[...]
> > Please post the output of dmesg when trying to "modprobe snd-ca0106"
> > Also, the output from "cat /proc/asound/cards"
> guest@demudi:~$ dmesg | tail -n5
> [drm] Initialized drm 1.0.0 20040925
> [drm] Initialized r128 2.5.0 20030725 on minor 0: ATI Technologies Inc =
Rage
> 128
> Pro Ultra TF
> gameport: kgameportd exiting
> PCI: Found IRQ 10 for device 0000:00:0d.0
> Model 100a Rev 00000000 Serial 100a1102
> guest@demudi:~$ cat /proc/asound/cards
> 0 [CA0106         ]: CA0106 - CA0106
>                      AudigyLS [Unknown] at 0xe800 irq 10
> guest@demudi:~$ cat /proc/asound/version
> Advanced Linux Sound Architecture Driver Version 1.0.9b.
> Compiled on Sep 16 2005 for kernel 2.6.13.

I think this board look like an SB Live! 24 bits pci, they have the same
technical specs (EAX Advanced HD 3.0, 96kHz/24bits, SNR 100db, CMSS 7.1).
However, it is a board from the audigy 1 serie not the audigy 2 serie (al=
saconf
see it as audigy 2 LS)

Another interesting point is that if you look at the PCB details of a aud=
igy SE
and a live! 24 bits, there are lots of similarity, not only on the dimens=
ion of
the board itself, but on the compnents too.
Lot of components are the same *and* have the same reference number.

For example the power supply part (at the rigth of the board), is the sam=
e, same
chips, same placement, same reference (this is true for IC, diodes, resis=
tors,
capacitors...)

The main change (that is visual) is the DAC, the "live! 24" have a CS4382=
 and
the "SE" have a ??? (seems to be a WMXXXX i will look tonigth at home).
Both cards have the ca0106 DSP and the WM8775 ADC (24-bit, 96kHz).

Does anyone have the ca0106 datasheet? Any ideas/point out to start tryin=
g
adding supprt for this card?

Christian.

http://images.europe.creative.com/iss/images/artwork/a5_rgb/sb_live24pci_=
c.jpg
http://images.europe.creative.com/iss/images/artwork/A5_RGB/Audigy_SE_c.j=
pg



>
> I attach the output of alsa-debug too.
>
> Christian
> >
>
>
>