Re: [Alsa-user] Problem with several Creative Labs soundcards, possibly more?
Brought to you by:
perex
From: Nazo <na...@gm...> - 2005-10-22 17:24:12
|
I'm not sure what "top post" means. The cc thing was just carelessness as I clicked the wrong reply button and didn't realize it. Anyway, the two log files you wanted me to check don't exist in this I'm afraid. I think I'll try reinstalling Mandriva later. And I did "install" the new kernel correctly, I just made a mistake and removed something apparently vital for keyboard support. Without a keyboard, I couldnt' log in or reboot, so was forced to do a hardboot. And yes linux CAN handle lockups/forced reboots better. If windows can do it, linux can do it better. Problem is, linux doesn't have the practice at it. You know every time I do a hardboot in linux, major damage occurs, but, I've had the same copy of XP installed since I got this system. I'm not sure that nForce 3 counts as "bleeding edge" though one could maybe argue that san diego is pretty new-ish. Still, it doesn't have many features versus older A64s. Mainly just SSE3 (which isn't saying much.) On 10/22/05, Lee Revell <rlr...@jo...> wrote: > On Sat, 2005-10-22 at 02:24 -0500, Nazo wrote: > > I was trying to compile another kernel and messed > > up one thing so that when I booted it I was forced to do a hard reset. > > Linux prevents lockups and other such problems like a dream, but, the > > moment a problem occurs it handles it so terribly it's not even > > funny. > > You probably didn't install the kernel properly. It's impossible to > handle this any better. This is not supposed to be done by end users > anyway. > > The dmesg is incomplete - I need the full log. Try > checking /var/log/kernel or /var/log/kern.log and post all the messages > since boot. > > Lee > > On 10/22/05, Lee Revell <rlr...@jo...> wrote: > Also, please don't top post, and please don't remove alsa-user and > alsa-devel from the cc: list. > > I still think it's a kernel problem because you have bleeding edge > hardware (Athlon64) with relatively unknown specs (Nforce chipset). > > On Sat, 2005-10-22 at 02:24 -0500, Nazo wrote: > > Firstly, the reason I really wonder if it's a kernel bug is the fact > > that it's shown up in so many different kernels. That said, if you > > honestly think I should report it, can you tell me how to do so? I've > > never even thought about reporting a kernel bug before, so have no > > idea where even to go. > > > > Anyway, bad news. I was trying to compile another kernel and messed > > up one thing so that when I booted it I was forced to do a hard reset. > > Linux prevents lockups and other such problems like a dream, but, the > > moment a problem occurs it handles it so terribly it's not even funny. > > Simply put, it no longer boots the normal kernel either due to severe > > filesystem damage and the repairs are beyond the scope of what I know > > to do, so I'd have to simply reinstall again (I swear my luck with > > linux is horrible.) This takes a while and I'd rather not do it > > tonight. If you really need me to I will, but, I wondered if maybe > > the results from GeeXBoX would do? It doesn't do the hardware loop > > thing, but, this is the first place I get no sound (and, if it's a > > seperate issue then this just goes right back to the fact that that's > > the issue I REALLY want to fix.) So, here are the outputs from > > GeeXBoX: > > > > Ok, first of all, the interrupts. It probably doesn't do any good, > > but, I thought I'd paste them. The only difference I saw between the > > before and after was the second number (which I presume is something > > more along the lines of how much information it has been used for?) > > CPU0 > > 0: 214447 IO-APIC-edge timer > > 1: 1021 IO-APIC-edge i8042 > > 8: 8552 IO-APIC-edge rtc > > 9: 1 IO-APIC-level acpi > > 14: 30997 IO-APIC-edge ide0 > > 15: 696 IO-APIC-edge ide1 > > 16: 20396 IO-APIC-level eth0 > > 17: 3 IO-APIC-level ohci1394 > > 18: 3 IO-APIC-level ehci_hcd:usb1 > > 19: 0 IO-APIC-level ohci_hcd:usb2 > > 20: 50 IO-APIC-level ohci_hcd:usb3 > > 21: 326 IO-APIC-level EMU10K1 > > NMI: 0 > > LOC: 214348 > > ERR: 0 > > MIS: 0 > > > > And dmesg (apparently part got cut off, sorry, but, it got cut off > > before getting to the sound relate stuff): > > e driver v2.3 > > Initializing USB Mass Storage driver... > > usbcore: registered new driver usb-storage > > USB Mass Storage support registered. > > usbcore: registered new driver usbhid > > drivers/usb/input/hid-core.c: v2.01:USB HID core driver > > usb 3-1: new low speed USB device using ohci_hcd and address 2 > > input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on > > usb-0000:00:02.1-1 > > usb 3-2: new full speed USB device using ohci_hcd and address 3 > > usbcore: registered new driver xpad > > drivers/usb/input/xpad.c: X-Box pad driver:v0.0.5 > > pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver > > usbcore: registered new driver pegasus > > drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (20= 04/08/27) > > usbcore: registered new driver rtl8150 > > gameport: EMU10K1 is pci0000:02:09.1/gameport0, io 0xc400, speed 1217kH= z > > Advanced Linux Sound Architecture Driver Version 1.0.9b (Thu Jul 28 > > 12:20:13 2005 UTC). > > ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 > > ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (level, > > low) -> IRQ 21 > > Installing spdif_bug patch: Audigy 2 ZS [SB0350] > > ALSA device list: > > #0: Audigy 2 ZS [SB0350] (rev.4, serial:0x20021102) at 0xc000, irq 21 > > NET: Registered protocol family 2 > > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > > TCP bind hash table entries: 65536 (order: 6, 262144 bytes) > > TCP: Hash tables configured (established 131072 bind 65536) > > TCP reno registered > > TCP bic registered > > NET: Registered protocol family 1 > > NET: Registered protocol family 17 > > powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.3= ) > > powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x6 (1400 mV) > > powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x8 (1350 mV) > > powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa (1300 mV) > > powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) > > cpu_init done, current fid 0xc, vid 0x6 > > Using IPI Shortcut mode > > ACPI wakeup devices: > > HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI > > ACPI: (supports S0 S1 S3 S4 S5) > > RAMDISK: Compressed image found at block 0 > > input: AT Translated Set 2 keyboard on isa0060/serio0 > > VFS: Mounted root (ext2 filesystem). > > Freeing unused kernel memory: 300k freed > > ReiserFS: hda1: warning: sh-2021: reiserfs_fill_super: can not find > > reiserfs on hda1 > > VFS: Can't find ext3 filesystem on dev hda1. > > VFS: Can't find an ext2 filesystem on dev hda1. > > ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c01510815d7] > > ReiserFS: hda2: warning: sh-2021: reiserfs_fill_super: can not find > > reiserfs on hda2 > > VFS: Can't find ext3 filesystem on dev hda2. > > VFS: Can't find an ext2 filesystem on dev hda2. > > attempt to access beyond end of device > > hda3: rw=3D0, want=3D18, limit=3D2 > > ReiserFS: hda3: warning: sh-2006: read_super_block: bread failed (dev > > hda3, block 8, size 1024) > > attempt to access beyond end of device > > hda3: rw=3D0, want=3D130, limit=3D2 > > ReiserFS: hda3: warning: sh-2006: read_super_block: bread failed (dev > > hda3, block 64, size 1024) > > ReiserFS: hda3: warning: sh-2021: reiserfs_fill_super: can not find > > reiserfs on hda3 > > attempt to access beyond end of device > > hda3: rw=3D0, want=3D4, limit=3D2 > > EXT3-fs: unable to read superblock > > attempt to access beyond end of device > > hda3: rw=3D0, want=3D4, limit=3D2 > > EXT2-fs: unable to read superblock > > FAT: bogus number of reserved sectors > > VFS: Can't find a valid FAT filesystem on dev hda3. > > attempt to access beyond end of device > > hda3: rw=3D0, want=3D66, limit=3D2 > > isofs_fill_super: bread failed, dev=3Dhda3, iso_blknum=3D16, block=3D32 > > attempt to access beyond end of device > > hda3: rw=3D0, want=3D3, limit=3D2 > > HFS+-fs: unable to find HFS+ superblock > > attempt to access beyond end of device > > hda3: rw=3D0, want=3D3, limit=3D2 > > VFS: Can't find a HFS filesystem on dev hda3. > > NTFS-fs error (device hda3): read_ntfs_boot_sector(): Primary boot > > sector is invalid. > > NTFS-fs error (device hda3): read_ntfs_boot_sector(): Mount option > > errors=3Drecover not used. Aborting without trying to recover. > > NTFS-fs error (device hda3): ntfs_fill_super(): Not an NTFS volume. > > You didn't specify the type of your ufs filesystem > > > > mount -t ufs -o > > ufstype=3Dsun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|netxstep-cd|opens= tep > > ... > > > > >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufs= type=3Dold > > attempt to access beyond end of device > > hda3: rw=3D0, want=3D18, limit=3D2 > > attempt to access beyond end of device > > hda3: rw=3D0, want=3D68, limit=3D2 > > attempt to access beyond end of device > > hda3: rw=3D0, want=3D1252, limit=3D2 > > attempt to access beyond end of device > > hda3: rw=3D0, want=3D1028, limit=3D2 > > UDF-fs: No partition found (1) > > ReiserFS: hda5: warning: sh-2021: reiserfs_fill_super: can not find > > reiserfs on hda5 > > VFS: Can't find ext3 filesystem on dev hda5. > > VFS: Can't find an ext2 filesystem on dev hda5. > > FAT: bogus number of reserved sectors > > VFS: Can't find a valid FAT filesystem on dev hda5. > > Unable to identify CD-ROM format. > > HFS+-fs: unable to find HFS+ superblock > > VFS: Can't find a HFS filesystem on dev hda5. > > NTFS volume version 3.1. > > ReiserFS: hda6: warning: sh-2021: reiserfs_fill_super: can not find > > reiserfs on hda6 > > ext3: No journal on filesystem on hda6 > > ReiserFS: hda7: warning: sh-2021: reiserfs_fill_super: can not find > > reiserfs on hda7 > > VFS: Can't find ext3 filesystem on dev hda7. > > VFS: Can't find an ext2 filesystem on dev hda7. > > FAT: invalid media value (0x7c) > > VFS: Can't find a valid FAT filesystem on dev hda7. > > Unable to identify CD-ROM format. > > HFS+-fs: unable to find HFS+ superblock > > VFS: Can't find a HFS filesystem on dev hda7. > > NTFS-fs warning (device hda7): is_boot_sector_ntfs(): Invalid boot > > sector checksum. > > NTFS-fs error (device hda7): read_ntfs_boot_sector(): Primary boot > > sector is invalid. > > NTFS-fs error (device hda7): read_ntfs_boot_sector(): Mount option > > errors=3Drecover not used. Aborting without trying to recover. > > NTFS-fs error (device hda7): ntfs_fill_super(): Not an NTFS volume. > > You didn't specify the type of your ufs filesystem > > > > mount -t ufs -o > > ufstype=3Dsun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|netxstep-cd|opens= tep > > ... > > > > >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufs= type=3Dold > > ufs_read_super: bad magic number > > UDF-fs: No VRS found > > ReiserFS: hdc: warning: sh-2021: reiserfs_fill_super: can not find > > reiserfs on hdc > > VFS: Can't find ext3 filesystem on dev hdc. > > VFS: Can't find an ext2 filesystem on dev hdc. > > FAT: bogus number of reserved sectors > > VFS: Can't find a valid FAT filesystem on dev hdc. > > ISO 9660 Extensions: Microsoft Joliet Level 3 > > ISO 9660 Extensions: RRIP_1991A > > usbcore: registered new driver rtusb > > InterWave soundcard not found or device busy > > Sound Blaster 16 soundcard not found or device busy > > In case, if you have AWE card, try snd-sbawe module > > Sound Blaster 16 soundcard not found or device busy > > In case, if you have AWE card, try snd-sbawe module > > lirc_dev: IR Remote Control driver registered, at major 61 > > > > lirc_atiusb: USB remote driver for LIRC v0.4 > > lirc_atiusb: Paul Miller <pmi...@us...> > > usbcore: registered new driver lirc_atiusb > > CIFS VFS: No response buffer > > CIFS VFS: cifs_mount failed w/return code =3D -112 > > ReiserFS: hda2: warning: sh-2021: reiserfs_fill_super: can not find > > reiserfs on hda2 > > VFS: Can't find ext3 filesystem on dev hda2. > > VFS: Can't find an ext2 filesystem on dev hda2. > > atkbd.c: Unknown key pressed (translated set 2, code 0xbc on isa0060/se= rio0). > > atkbd.c: Use 'setkeycodes e03c <keycode>' to make it known. > > atkbd.c: Unknown key released (translated set 2, code 0xbc on isa0060/s= erio0). > > atkbd.c: Use 'setkeycodes e03c <keycode>' to make it known. > > atkbd.c: Unknown key pressed (translated set 2, code 0xbb on isa0060/se= rio0). > > atkbd.c: Use 'setkeycodes e03b <keycode>' to make it known. > > atkbd.c: Unknown key released (translated set 2, code 0xbb on isa0060/s= erio0). > > atkbd.c: Use 'setkeycodes e03b <keycode>' to make it known. > > > > > > > > On 10/22/05, Lee Revell <rlr...@jo...> wrote: > > > Please don't top post. > > > > > > On Fri, 2005-10-21 at 21:58 -0500, Nazo wrote: > > > > If I boot with pci=3Dnoacpi, the normal mandriva kernel hangs just = after > > > > it says hit I for interactive setup. The vanilla one starts up, bu= t, > > > > when I try to play an audio file, I have the same problem. Bear in > > > > mind when saying the problem lies with the kernel that I've seen th= is > > > > issue on several different kernel versions. > > > > > > > > As for my motherboard, it's a Gigabyte 9NDA3J. The chipset is the > > > > nForce 3 Ultra (which I believe is basically just a nForce 3 250 wi= th > > > > the only change being the socket type, but, I'm not 100% sure.) I > > > > think I saw some things using the 250 driver for the motherboard > > > > rather than saying ultra, but, like I said, I think this is probabl= y > > > > ok. > > > > > > > > > > OK, it still sounds like a kernel problem. The IRQ handling code in = the > > > emu10k1 driver is quite simple and almost certainly free of bugs. OT= OH, > > > I see TONS of reports like this on LKML, and it's always an ACPI issu= e. > > > > > > Unless someone on alsa-devel has a better idea, I think you need to > > > report this on the kernel bugzilla. > > > > > > Can you check /proc/interrupts and see if the number of interrupts fo= r > > > your soundcard increases when you play sounds? Also please post the > > > output of "dmesg" after rebooting the machine and trying to play a > > > sound. > > > > > > Lee > > > > > > > On 10/21/05, Lee Revell <rlr...@jo...> wrote: > > > > > On Fri, 2005-10-21 at 17:19 -0500, Nazo wrote: > > > > > > When I got it to sucessfully boot, and tried to play something,= it > > > > > > played one frame over and over in a loop (kind of like what hap= pens > > > > > > when the system locks up in the middle of a game or something.)= When > > > > > > the application was closed and another different sound file was > > > > > > attempted, it gave an IO error and no sound came out at all. B= ased on > > > > > > the way it kind of acted like the hardware locked up or somethi= ng, my > > > > > > first guess would be maybe something along the lines of an IRQ > > > > > > conflict or somesuch? That's just a guess though. Anyway, he = thought > > > > > > it might be useful if I provided some extra info, so I've added= them > > > > > > to the bottom of the message: > > > > > > > > > > > > > > > > OK, this is a classic sign that interrupts are not being acknowle= dged > > > > > properly. It's not a problem with the ALSA drivers but with the = kernel. > > > > > Probably an ACPI issue. > > > > > > > > > > What is the make and model of your motherboard? > > > > > > > > > > Does it work if you boot with "pci=3Dnoacpi"? > > > > > > > > > > Lee > > > > > > > > > > > > > > > > > > > > > > > > > > > > > |