Re: [Alsa-user] Toshiba OPL3SA2

[Ted P. <th....@gm...>]

Clemens,

Modinfo finds the driver and provides information. I am pasting it below.

There is also what I think is an OSS driver, simply opl3sa2, without
the prefixed "-snd." Could there be a conflict?

Is this an isa-pnp issue, by any chance? I'm stumped.

Thanks,
Ted

gratia:/home/tparks# modinfo snd-opl3sa2
filename:    /lib/modules/2.4.27-1-386/updates/alsa/snd-opl3sa2.o
description: "Yamaha OPL3SA2+"
author:      "Jaroslav Kysela <pe...@su...>"
license:     "GPL"
parm:        index int array (min = 1, max = 8), description "Index
value for OP L3-SA soundcard."
parm:        id string array (min = 1, max = 8), description "ID
string for OPL3 -SA soundcard."
parm:        enable byte array (min = 1, max = 8), description "Enable
OPL3-SA s oundcard."
parm:        isapnp byte array (min = 1, max = 8), description "PnP
detection fo r specified soundcard."
parm:        port long array (min = 1, max = 8), description "Port #
for OPL3-SA  driver."
parm:        sb_port long array (min = 1, max = 8), description "SB
port # for O PL3-SA driver."
parm:        wss_port long array (min = 1, max = 8), description "WSS
port # for  OPL3-SA driver."
parm:        fm_port long array (min = 1, max = 8), description "FM
port # for O PL3-SA driver."
parm:        midi_port long array (min = 1, max = 8), description
"MIDI port # f or OPL3-SA driver."
parm:        irq int array (min = 1, max = 8), description "IRQ # for
OPL3-SA dr iver."
parm:        dma1 int array (min = 1, max = 8), description "DMA1 #
for OPL3-SA driver."
parm:        dma2 int array (min = 1, max = 8), description "DMA2 #
for OPL3-SA driver."
parm:        opl3sa3_ymode int array (min = 1, max = 8), description
"Speaker si ze selection for 3D Enhancement mode: Desktop/Large
Notebook/Small Notebook/HiFi ."



On Thu, 16 Dec 2004 12:52:48 +0100 (MET), Clemens Ladisch
<cl...@la...> wrote:
> Ted Parks wrote:
> > When I try to modprobe snd-opl3sa2, I get an error that the driver
> > cannot be found. However, the driver is located in
> > /lib/modules/2.4.27-1-386/updates/alsa.
> 
> Does "modinfo snd-opl3sa2" work?  What is the error message?
> 
> 
> Clemens
> 
>