[Alsa-user] Intel 810
Brought to you by:
perex
From: Magnus U. <ma...@ul...> - 2002-11-16 19:35:54
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Recompiling the ALSA drivers from the latest cvs fixed the problem with the computer locking up hard. But now i dont have any sound. [root@localhost root]# gmplayer -ao alsa9 file.wav [snip] alsa-init: testing and bugreports are welcome. alsa-init: requested format: 22050 Hz, 2 channels, Unsigned 8-bit alsa-init: 1 soundcard found, using: hw:0,0 alsa-init: unable to set format: Invalid argument couldn't open/init audio device -> no sound Audio: no sound!!! Video: no video!!! [root@localhost root]# lsmod Module Size Used by Tainted: P tuner 11456 1 (autoclean) tvaudio 14940 0 (autoclean) (unused) msp3400 18636 1 (autoclean) bttv 71456 0 (autoclean) videodev 8288 3 (autoclean) [bttv] i2c-algo-bit 8840 1 (autoclean) [bttv] i2c-core 19268 0 (autoclean) [tuner tvaudio msp3400 bttv i2c-algo-bit] ide-cd 33608 0 (autoclean) cdrom 33696 0 (autoclean) [ide-cd] snd-pcm-oss 44420 0 (autoclean) snd-mixer-oss 15480 0 (autoclean) [snd-pcm-oss] agpgart 43136 3 (autoclean) NVdriver 1149216 10 (autoclean) snd-intel8x0 23648 0 (autoclean) snd-pcm 83328 0 (autoclean) [snd-pcm-oss snd-intel8x0] snd-timer 15304 0 (autoclean) [snd-pcm] snd-ac97-codec 36100 0 (autoclean) [snd-intel8x0] snd-mpu401-uart 4812 0 (autoclean) [snd-intel8x0] snd-rawmidi 18400 0 (autoclean) [snd-mpu401-uart] snd-seq-device 6176 0 (autoclean) [snd-rawmidi] snd 39404 0 (autoclean) [snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device] soundcore 6532 3 (autoclean) [snd] autofs 13348 0 (autoclean) (unused) eepro100 22264 1 iptable_filter 2412 0 (autoclean) (unused) ip_tables 14936 1 [iptable_filter] mousedev 5524 1 keybdev 2976 0 (unused) hid 22244 0 (unused) input 5920 0 [mousedev keybdev hid] usb-uhci 26188 0 (unused) usbcore 77024 1 [hid usb-uhci] ext3 70368 2 jbd 52212 2 [ext3] [root@localhost root]# lspci 00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04) 00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 04) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 02) 00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 02) 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 02) 00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 02) 00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation NV5 [Riva TnT2] (rev 15) 02:08.0 Ethernet controller: Intel Corp. 82801BA/BAM/CA/CAM Ethernet Controller (rev 01) 02:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) [root@localhost root]# lspci -nvv 00:00.0 Class 0600: 8086:1130 (rev 04) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at 48000000 (32-bit, prefetchable) [size=64M] Capabilities: [88] #09 [f104] Capabilities: [a0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4 Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x4 00:01.0 Class 0604: 8086:1131 (rev 04) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 Memory behind bridge: 41000000-421fffff Prefetchable memory behind bridge: 44000000-45ffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- 00:1e.0 Class 0604: 8086:244e (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 00001000-00001fff Memory behind bridge: 40100000-403fffff Prefetchable memory behind bridge: 42200000-423fffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 00:1f.0 Class 0601: 8086:2440 (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:1f.1 Class 0101: 8086:244b (rev 02) (prog-if 80 [Master]) Subsystem: 8086:2411 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: [virtual] I/O ports at 01f0 Region 1: [virtual] I/O ports at 03f4 Region 2: [virtual] I/O ports at 0170 Region 3: [virtual] I/O ports at 0374 Region 4: I/O ports at 2460 [size=16] 00:1f.4 Class 0c03: 8086:2444 (rev 02) Subsystem: 8086:2411 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 11 Region 4: I/O ports at 2440 [size=32] 00:1f.5 Class 0401: 8086:2445 (rev 02) Subsystem: 0e11:000e Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 10 Region 0: I/O ports at 2000 [size=256] Region 1: I/O ports at 2400 [size=64] 01:00.0 Class 0300: 10de:0028 (rev 15) Subsystem: 0e11:001f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 10 Region 0: Memory at 41000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at 44000000 (32-bit, prefetchable) [size=32M] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4 Command: RQ=31 SBA- AGP+ 64bit- FW- Rate=x4 02:08.0 Class 0200: 8086:2449 (rev 01) Subsystem: 0e11:0012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (2000ns min, 14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: Memory at 40100000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 1000 [size=64] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 02:0a.0 Class 0400: 109e:036e (rev 11) Subsystem: 0070:13eb Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 5 Region 0: Memory at 42200000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:0a.1 Class 0480: 109e:0878 (rev 11) Subsystem: 0070:13eb Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 5 Region 0: Memory at 42300000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- [root@localhost root]# Anybody have any ideas? Thanks, Magnus -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 7.0.3 for non-commercial use <http://www.pgp.com> iQA/AwUBPdaeFMu3lhUVmrCaEQKRrgCfWeyMfCK7sWgoPBcNc2X27Vnxa4cAn1nW S9uM/4jgs80rroxB6R+Gm4Re =HJPH -----END PGP SIGNATURE----- |