Re: [Aironet] transmission and reception while capturing with wifi0
Status: Inactive
Brought to you by:
breed
From: yorkwar <ai...@pe...> - 2002-04-23 01:04:34
|
>From: "Shingo HORISAWA" <hor...@at...> >To: <ai...@en...> >Date: Mon, 22 Apr 2002 22:48:56 +0900 >Subject: [Aironet] transmission and reception while capturing with wifi0 > >Hi, all. > >The problem I asked about 2 weeks ago was solved. >The cause was due to old kernel version. >I tested it with kernel 2.4.18, and I could compile it. > >By the way, I faced a new problem. >I am using CVS 1.37 in RFMON mode, to capture >raw 802.11 packets. >Ethereal-0.9.3 and libpcap-0.7.1 were already installed. >Capturing by wifi0 goes well, too. > >But, transmission and reception does not yet go well >while capturing. When you are in "rfmon" mode, the card can only receive radio signal. It can't transmit simultaneously. > >My current setting and procedure are as follows: > > eth0 : 192.168.100.101/24 > wifi0 : 192.168.200.101/24 > > (1) echo "Mode: rfmon" >/proc/driver/aironet/eth0/Config > (2) ethereal -i wifi0 > >Are there anythitng wrong ? > > >Regards. > > >***************** > Shingo Horisawa > > > >--__--__-- > >_______________________________________________ >Aironet mailing list - Ai...@cs... >http://csl.cse.ucsc.edu/mailman/listinfo/aironet > > >End of Aironet Digest |