[Acx100-users] AMD64 nForce4 - Planet WL-8305

[Papp R. <pe...@di...>]

Hi!

A have a problem with $subj combo. The acx module can't load the 
firmware from /usr/share/acx directory (where I put the necessary 
tiacx100 and tiacx100r0D files).
I tried with 2.6.11-13 and older / newer version of acx module source.

module load log:
--- snip
Oct 15 10:05:45 localhost kernel: 94893855 ==> acxpci_e_init_module
Oct 15 10:05:45 localhost kernel: acx: compiled to use 32bit I/O access. 
I/O timing issues might occur, such as non-working firmware upload. 
Report them
Oct 15 10:05:45 localhost kernel: running on a little-endian CPU
Oct 15 10:05:45 localhost kernel: PCI module v0.3.12 initialized, 
waiting for cards to probe...
Oct 15 10:05:45 localhost kernel: 94893858   ==> acxpci_e_probe
Oct 15 10:05:45 localhost kernel: ACPI: PCI Interrupt Link [APC2] 
enabled at IRQ 17
Oct 15 10:05:45 localhost kernel: ACPI: PCI Interrupt 0000:01:07.0[A] -> 
Link [APC2] -> GSI 17 (level, low) -> IRQ 18
Oct 15 10:05:45 localhost kernel: acx: found ACX100-based wireless 
network card at 0000:01:07.0, irq:18, phymem1:0xFE9FF000, 
phymem2:0xFE9D0000, mem1:0xffffc20000006000, mem1_size:4096, 
mem2:0xffffc20000060000, mem2_size:65536
Oct 15 10:05:45 localhost kernel: initial debug setting is 0xFFFF
Oct 15 10:05:45 localhost kernel: tx: stop queue after setup
Oct 15 10:05:45 localhost kernel: using IRQ 18
Oct 15 10:05:45 localhost kernel: 94893858     ==> acxpci_s_reset_dev
Oct 15 10:05:45 localhost kernel: 94893858       ==> acxpci_l_reset_mac
Oct 15 10:05:45 localhost kernel: acxpci_l_reset_mac: enable soft reset...
Oct 15 10:05:45 localhost kernel: acxpci_l_reset_mac: disable soft reset 
and go to init mode...
Oct 15 10:05:45 localhost kernel: 94893858       <== acxpci_l_reset_mac
Oct 15 10:05:45 localhost kernel: max lock hold time 145133 CPU ticks 
from pci.c:909 to pci.c:935
Oct 15 10:05:45 localhost kernel: 94893858       ==> acx_s_msleep
Oct 15 10:05:45 localhost kernel: 94893862       <== acx_s_msleep
Oct 15 10:05:45 localhost kernel: 94893862       ==> acxpci_s_upload_fw
Oct 15 10:05:45 localhost kernel: requesting firmware image 'tiacx100c0D'
Oct 15 10:05:45 localhost kernel: acx: firmware image 'tiacx100c0D' was 
not provided. Check your hotplug scripts
Oct 15 10:05:45 localhost kernel: requesting firmware image 'tiacx100'
Oct 15 10:05:45 localhost kernel: acx: firmware image 'tiacx100' was not 
provided. Check your hotplug scripts
Oct 15 10:05:45 localhost kernel: 94893892       <== acxpci_s_upload_fw: 
00000001
Oct 15 10:05:45 localhost kernel: acx: reset_dev() FAILED
Oct 15 10:05:45 localhost kernel: 94893892     <== acxpci_s_reset_dev: 
00000001
Oct 15 10:05:45 localhost kernel: ACPI: PCI interrupt for device 
0000:01:07.0 disabled
Oct 15 10:05:45 localhost kernel: 94893896   <== acxpci_e_probe: FFFFFFFB
Oct 15 10:05:45 localhost kernel: acx_pci: probe of 0000:01:07.0 failed 
with error -5
Oct 15 10:05:45 localhost kernel: 94893896 <== acxpci_e_init_module: 
00000000
---snap

(I hope it wasn't too long...)
Hw environment:
wifi card: Planet WL-8305
mainboard chpiset: nForce4 with AMD64 3000+

2.6.10 with the ...fixes57 is working correctly (Yes, I hear about the 
changes in the newer kernels).

Any idea? Please send me! Thank you!