From: Frank S. <fr...@sc...> - 2004-11-20 20:00:54
|
hi all, sorry for wasting your time. I found a hint in a howto, that WEP isn`t supported for the acx111 chipset yet.(or does anybody have newer information ??) cu frank Am Samstag, den 20.11.2004, 17:21 +0100 schrieb Frank Schreiner: > hi all, > > i try to get my DWL-G650+ running under SuSE 9.2. My setup in short: > > > fixed ip for wlan0 > ######################################################################## > wlan0 IEEE 802.11g+ ESSID:"schreiner" Nickname:"schnurzl" > Mode:Managed Frequency:2.437 GHz Access Point: > 00:0D:88:9B:E8:12 > Bit Rate:54 Mb/s Tx-Power:15 dBm > Retry min limit:7 RTS thr:off > Encryption key:XXXX-XXXX-XX Security mode:open > Power Management:off > Link Quality=61/100 Signal level=46/100 Noise level=0/100 > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > Tx excessive retries:0 Invalid misc:0 Missed beacon:0 > ######################################################################## > > but i get an error-message in dmesg: > > ###################################################################################### > <Scan Table> 1: SSID="schreiner",CH=6,SIR=46,SNR=0 > peer_cap 0x0071, needed_cap 0x0001 > Found station with matching ESSID!! ("schreiner" station, "schreiner" > config) > acx100_complete_dot11_scan: matching station FOUND (idx 1), JOINING (00 > 0D 88 9B E8 12). > <acx_join_bssid> BSS_Type = 2 > <acx_join_bssid> JoinBSSID MAC:00 0D 88 9B E8 12 > Sending authentication1 request, awaiting response! > acx100_set_status: Setting status = 2 (WAIT_AUTH) > <acx100_set_timer> Elapse = 1500000 > acx100_process_authen: UNVERIFIED. > 00:0D:88:8F:1A:0700:0D:88:8F:1A:0700:0D:88:9B:E8:1200:0D:88:9B:E8:1200:0D:88:9B:E8:12<4> > Algorithm is ok > Got current client for sta hash tab > Found acceptable client > <acx100_sta_list_add> sta = 00:0D:88:9B:E8:12 > acx100_process_authen auth seq step 2. > acx100_set_status: Setting status = 3 (AUTHENTICATED) > <acx100_set_timer> Elapse = 1500000 > Sending association request, awaiting response! NOT ASSOCIATED YET. > association: requesting capabilities 0x0061 > acx100_set_status: Setting status = 4 (ASSOCIATED) > ASSOCIATED! > acx100_timer: status = 4 > Don't know how to get sensitivity for this radio type, please try to add > that! > wlan0: no IPv6 routers present > Got IV ICV Failure IRQ > Got Info IRQ: status 0x1001, type 0x0005: encrypt/decrypt on a packet > has failed > Got IV ICV Failure IRQ > Got Info IRQ: status 0x1001, type 0x0005: encrypt/decrypt on a packet > has failed > Got IV ICV Failure IRQ > Got Info IRQ: status 0x1001, type 0x0005: encrypt/decrypt on a packet > has failed > Got IV ICV Failure IRQ > ####################################################################################### > > in the stats of the router i see my client but i can`t ping. Could > anybody give me a hint if i made an configuration error or maybe this is > a bug in the driver ?? > > if any additional information is needed for debugging, let me know. > > Thanks > > Frank > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: InterSystems CACHE > FREE OODBMS DOWNLOAD - A multidimensional database that combines > robust object and relational technologies, making it a perfect match > for Java, C++,COM, XML, ODBC and JDBC. www.intersystems.com/match8 > _______________________________________________ > Acx100-users mailing list > Acx...@li... > https://lists.sourceforge.net/lists/listinfo/acx100-users |