[Acx100-devel] dlink dwl650+ problems

[Bret H. <bh...@el...>]

I can't figure out what the problem is with this setup:

via mII 10000 ipx board 
dlink dwl650+ card.

fedora 1 install
2.4.22-1.2188.nptl kernel

acx100-0.2.0pre8_plus_fixes_12

module compiled ok

[root@install238 root]# cardctl ident
Socket 0:
  product info: "Wireless Network CardBus PC Card", "Global", "", ""
  manfid: 0x0097, 0x8402
  function: 6 (network)

[root@install238 root]# lspci -n
00:00.0 Class 0600: 1106:3123
00:01.0 Class 0604: 1106:b091
00:0a.0 Class 0607: 1180:0476 (rev 80)
00:0a.1 Class 0607: 1180:0476 (rev 80)
00:0d.0 Class 0c00: 1106:3044 (rev 80)
00:10.0 Class 0c03: 1106:3038 (rev 80)
00:10.1 Class 0c03: 1106:3038 (rev 80)
00:10.2 Class 0c03: 1106:3038 (rev 80)
00:10.3 Class 0c03: 1106:3104 (rev 82)
00:11.0 Class 0601: 1106:3177
00:11.1 Class 0101: 1106:0571 (rev 06)
00:12.0 Class 0200: 1106:3065 (rev 74)
01:00.0 Class 0300: 1106:3122 (rev 03)
02:00.0 Class 0280: 104c:8400

[root@install238 root]# lspci -v -s02:00.0
02:00.0 Network controller: Texas Instruments ACX 100 22Mbps Wireless
Interface
	Subsystem: D-Link System Inc: Unknown device 3b00
	Flags: medium devsel, IRQ 12
	I/O ports at 9000 [size=32]
	Memory at de003000 (32-bit, non-prefetchable) [size=4K]
	[virtual] Memory at de010000 (32-bit, non-prefetchable)
	Capabilities: [40] Power Management version 2

[root@install238 root]# cardctl eject
two beeps
and in /var/log/messages:
Jun  7 03:12:06 install238 kernel: cs: cb_free(bus 2)


[root@install238 root]# cardctl insert
no sound

dmesg:

cs: cb_alloc(bus 2): vendor 0x104c, device 0x8400
PCI: Failed to allocate resource 2(de010000-de004fff) for 02:00.0
PCI: Enabling device 02:00.0 (0000 -> 0003)
acx100: It looks like you've been coaxed into buying a wireless network
card
acx100: that uses the mysterious ACX100/ACX111 chip from Texas
Instruments.
acx100: You should better have bought e.g. a PRISM(R) chipset based
card,
acx100: since that would mean REAL vendor Linux support.
acx100: Given this info, it's evident that this driver is quite
EXPERIMENTAL,
acx100: thus your mileage may vary. Visit http://acx100.sf.net for
support.
acx100: Using 32 bit I/O access.
acx100_init_module: dev_info is: TI acx_pci
acx100_init_module: TI acx_pci.o: Ver 0.2.0pre8 Driver initialized,
waiting for cards to probe...
PCI: Setting latency timer of device 02:00.0 to 64
acx100_probe_pci: acx100: Cannot reserve PCI memory region 2
acx100_probe_pci: TI acx_pci.o: Ver 0.2.0pre8 Loading FAILED
Trying to free nonexistent resource <de010000-de004fff>

any tips appreciated.

I have read so much stuff I keep going in circles.

Bret