[Acx100-devel] [ acx100-Support Requests-838955 ] unresolved symbols

[SourceForge.net <no...@so...>]

Support Requests item #838955, was opened at 2003-11-10 01:17
Message generated for change (Comment added) made by andim2
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=543746&aid=838955&group_id=75380

Category: None
Group: None
>Status: Closed
Priority: 5
Submitted By: Nobody/Anonymous (nobody)
Assigned to: Nobody/Anonymous (nobody)
Summary: unresolved symbols

Initial Comment:
I was hoping to use the precompiled one for readhat 9,
but got unresolved symbol errors.  So I got my own
kernel sources and compiled my own, but STILL get them.
 Any ideas?

root@localhost acx100]# insmod src/acx100.o
firmware_dir=/root/acx100/firmware/
src/acx100.o: unresolved symbol
pci_register_driver_R1e536d21
src/acx100.o: unresolved symbol acx100_delete_dma_region
src/acx100.o: unresolved symbol acx100_ioctl
src/acx100.o: unresolved symbol register_netdev_R048b2b0e
src/acx100.o: unresolved symbol dev_alloc_name_Rd369369c
src/acx100.o: unresolved symbol
pci_set_power_state_R11eecaa6
src/acx100.o: unresolved symbol acx100_get_tx_desc
src/acx100.o: unresolved symbol softnet_data_Rb9c230c5
src/acx100.o: unresolved symbol __kfree_skb_Rb63883ce
src/acx100.o: unresolved symbol
pci_disable_device_R95846005
src/acx100.o: unresolved symbol acx100_interrogate
src/acx100.o: unresolved symbol acx100_write_reg16
src/acx100.o: unresolved symbol transmit_disassoc
src/acx100.o: unresolved symbol acx100_issue_cmd
src/acx100.o: unresolved symbol pci_set_master_R99cc7ae2
src/acx100.o: unresolved symbol pci_enable_device_R1bc741d2
src/acx100.o: unresolved symbol eth_type_trans_Rfb2cfabf
src/acx100.o: unresolved symbol acx100_init_mac
src/acx100.o: unresolved symbol acx100_reset_dev
src/acx100.o: unresolved symbol acx100_start
src/acx100.o: unresolved symbol acx100_disable_irq
src/acx100.o: unresolved symbol acx100_clean_tx_desc
src/acx100.o: unresolved symbol unregister_netdev_Rf596594d
src/acx100.o: unresolved symbol acx100_set_status
src/acx100.o: unresolved symbol
pci_unregister_driver_Re8061e13
src/acx100.o: unresolved symbol
__netdev_watchdog_up_R70650336
src/acx100.o: unresolved symbol acx100_read_eeprom_offset
src/acx100.o: unresolved symbol acx100_timer
src/acx100.o: unresolved symbol acx100_dma_tx_data
src/acx100.o: unresolved symbol acx100_read_reg16
src/acx100.o: unresolved symbol acx100_rxdesc_to_ether
src/acx100.o: unresolved symbol netif_rx_R22f96c70
src/acx100.o: unresolved symbol acx100_ether_to_txdesc
src/acx100.o: unresolved symbol acx100_enable_irq
src/acx100.o: unresolved symbol ether_setup_R2df3901d
src/acx100.o: unresolved symbol acx100_power_led
src/acx100.o: unresolved symbol acx100_process_rx_desc
src/acx100.o: unresolved symbol d11CompleteScan

My readhat 9 system didn't have a
/boot/vmlinuz.version.h file, so I copied the one from
/usr/source/linux-2.4.20-8/build/include/linux/version.h
to the appropriate place mentioned in the readme file.

It also then gave me the incompatible kernel error,
that i compiled it for 2.4.20 instead of 2.4.20-8.  
I'd used the (unpacked rpm) kernel sources for 2.4.20-8
really, so I just edited the version.h file to include
the '-8'.

Thanks for any help anyone can give me, I'm tearing my
hair out after a spending most of today on this :)

----------------------------------------------------------------------

>Comment By: Andreas Mohr (andim2)
Date: 2004-04-07 00:46

Message:
Logged In: YES 
user_id=132674

We had some modver header file issues, that should be fixed
now (except for one small issue which I still need to fix).
Thanks!

----------------------------------------------------------------------

Comment By: Andreas Mohr (andim2)
Date: 2003-11-22 13:53

Message:
Logged In: YES 
user_id=132674

Sounds like you still have issues with a not quite exact match
(and I'm afraid I cannot quite tell you what exactly needs
to be done in such a case to resolve it)

Try compiling and installing a new kernel (with your old
config settings that you'll hopefully find somewhere in your
installed kernel packages). That should fix it, because then
you should have version files that do match.

----------------------------------------------------------------------

Comment By: Nobody/Anonymous (nobody)
Date: 2003-11-10 01:57

Message:
Logged In: NO 

I should add my email address is kevin at@ allpoetry.com,
though i will be checking back here as well.

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=543746&aid=838955&group_id=75380