From: SourceForge.net <no...@so...> - 2003-12-02 04:15:36
|
Bugs item #850584, was opened at 2003-11-28 01:10 Message generated for change (Comment added) made by rusty0412 You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=543745&aid=850584&group_id=75380 Category: None Group: None Status: Open Resolution: None Priority: 9 Submitted By: Rafael Fernández (rusty0412) Assigned to: Nobody/Anonymous (nobody) Summary: Failed to download firmware to ACX100 Initial Comment: Hello, I have a DWL-650+, Fedora Core 1, I am running 0.2pre6 compiled by me. ACX100 cannot load the firmware. dmesg log: acx100: It looks like you were coaxed into buying a wireless network card acx100: that uses the mysterious ACX100 chip from Texas Instruments. acx100: You should better have bought e.g. a PRISM(R) chipset based card, acx100: since that would mean REAL vendor Linux support. acx100: Given this info, it's plain evident that this driver is EXPERIMENTAL, acx100: thus your mileage may vary. Visit http://acx100.sf.net for support. acx100_init_module: TI acx100_pci.o: Ver 0.2.0pre6 Loaded Found ACX100-based wireless network card, phymem1:0x40800000, phymem2:0x40810000, irq:11, mem1:0xf9c60000, mem2:0xf9c62000 Allocating 6592, 19C0h bytes for wlandevice_t Allocated 40636 bytes for firmware module loading. Failed to download firmware to the ACX100 acx100_probe_pci: TI acx100_pci: MAC initialize failure! modules.conf: options acx100_pci use_eth_name=1 debug=0x01 firmware_dir=/lib/modules/acx100_fmwe/ alias eth1 acx100_pci ---------------------------------------------------------------------- >Comment By: Rafael Fernández (rusty0412) Date: 2003-12-01 19:55 Message: Logged In: YES user_id=673325 Ok, I GOT IT WORKING!!! The problem of not downloading the firmware to the device its a bug of 2.0pre6, I now remember, after installing and seeing that 2.0pre6 didn't work, I grabed a working copy from CVS. I compiled it, but I never tested it. Today I placed it at /lib/modules/whatever/net/ and it fixed the problem of downloading the firmware, I don't know if the debug=0x03 helped. The next problem I encountered is that I was using the latest D-Link driver, the 3.06, I just tried 3.03 which doesn't contains radio15.bin and it WORKS!!! :)))) I don't have to buy driverloader!! I will soon write a tutorial to beginners on the D-Link DWL-650+ based on my experience. ---------------------------------------------------------------------- Comment By: Rafael Fernández (rusty0412) Date: 2003-12-01 19:33 Message: Logged In: YES user_id=673325 Ok, I more info on the subjetc, when I tried to run ifup eth1 I got this: Cannot get driver information: Operation not supported Determining IP information for eth1... ---------------------------------------------------------------------- Comment By: Rafael Fernández (rusty0412) Date: 2003-12-01 16:12 Message: Logged In: YES user_id=673325 Ok, I removed the alias to driverloader and configured modules.conf to acx100_pci.o with: alias eth1 acx100_pci options acx100_pci use_eth_name=1 debug=0x03 firmware_dir=/lib/modules/acx100_fmwe/ Now it doesn't tell me that it won't download the firmware, but there's a bigger problem. It actually comunicates with the adapter (the light flash while starting up) but it kinda dies. It can't send data(at startup it had a 100% data loss), it has a lot of trouble getting the IP. I think it can recieve data though, I was able to ping (after startup, where I retried to start the device) my laptop, which has the DWL-650+, but it can't ping my desktop. Don't expect to see any replies from me today, I have to learn 100 words for an english test tomorrow (I am in high school) Anyways here is the output from dmesg: acx100: It looks like you were coaxed into buying a wireless network card acx100: that uses the mysterious ACX100 chip from Texas Instruments. acx100: You should better have bought e.g. a PRISM(R) chipset based card, acx100: since that would mean REAL vendor Linux support. acx100: Given this info, it's plain evident that this driver is EXPERIMENTAL, acx100: thus your mileage may vary. Visit http://acx100.sf.net for support. acx100_init_module: TI acx100_pci.o: Ver 0.2.0pre6 Loaded PCI: Setting latency timer of device 03:00.0 to 64 Found ACX100-based wireless network card, phymem1:0x40800000, phymem2:0x40810000 , irq:11, mem1:0xf9c0b000, mem2:0xf9c0d000 Allocating 6592, 19C0h bytes for wlandevice_t hw_unavailable = 1 reset hw_unavailable++ Allocated 40636 bytes for firmware module loading. acx100_write_fw (firmware): 1, acx100_validate_fw: 1 reset hw_unavailable-- ************ acx100_initmac_1 ************ Allocated 964 bytes for firmware module loading. WriteACXImage (radio): 1, ValidateACXImage: 1 get_mask 0x00002004, set_mask 0x00000000 Got antenna value 0x8f. get_mask 0x00000000, set_mask 0x00000000 - after update Regulatory domain ID as read from EEPROM: 0x10 hw_unavailable-- acx100: form factor 0x00 (standard?), radio type 0x11 (RFMD), EEPROM version 0x0 004. Uploaded firmware 'Rev 1.9.8.b' (0x01020505). divert: allocating divert_blk for eth0 Warning: WEP support might not be supported in Ad-Hoc mode yet! firmware version >= 1.9.3.e --> using software timer initial settings update on iface activation. get_mask 0x00000000, set_mask 0x0000dfff Updating WEP key settings Updating transmit power: 20 dBm changing radio power level to 20 dBm (0x3f) Updating antenna value: 0x8F Updating energy detect threshold: 112 Updating Channel Clear Assessment value: 0x0D Updating: enable Tx Updating: enable Rx Updating short retry limit: 5, long retry limit: 3 Updating xmt MSDU lifetime: 2048 Updating regulatory domain: 0x10 Updating channel: 1 get_mask 0x00000000, set_mask 0x00000000 - after update acx100_process_probe_response: found and registered station 0: ESSID "family" on channel 11, BSSID 00 0D 88 8D 90 A9 (Access Point, 22Mbps), SIR 87, SNR 59. acx100_process_probe_response: found and registered station 1: ESSID "family" on channel 11, BSSID 00 40 05 26 B9 36 (Access Point, 22Mbps), SIR 128, SNR 59. d11CompleteScan: matching station FOUND (idx 1), JOINING (00 40 05 26 B9 36). Sending authentication1 request, awaiting response! Sending authentication1 request, awaiting response! <sta_list_add> sta = 00:40:05:26:B9:36 Sending association request, awaiting response! NOT ASSOCIATED YET. Sending association request, awaiting response! NOT ASSOCIATED YET. Sending association request, awaiting response! NOT ASSOCIATED YET. Sending association request, awaiting response! NOT ASSOCIATED YET. Sending association request, awaiting response! NOT ASSOCIATED YET. Sending association request, awaiting response! NOT ASSOCIATED YET. Sending association request, awaiting response! NOT ASSOCIATED YET. Sending association request, awaiting response! NOT ASSOCIATED YET. Sending association request, awaiting response! NOT ASSOCIATED YET. Sending association request, awaiting response! NOT ASSOCIATED YET. Sending association request, awaiting response! NOT ASSOCIATED YET. parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). lp0: console ready Intel 810 + AC97 Audio, version 0.24, 15:50:18 Oct 29 2003 PCI: Found IRQ 11 for device 00:1f.5 PCI: Sharing IRQ 11 with 00:1f.6 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH4 found at IO 0xbc40 and 0xb800, MEM 0xf4fff800 and 0xf4fff400, I RQ 11 i810: Intel ICH4 mmio at 0xf9c4c800 and 0xf9c4e400 i810_audio: Primary codec has ID 0 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 0 ac97_codec: AC97 Audio codec, id: 0x8384:0x7650 (Unknown) i810_audio: AC'97 codec 0 supports AMAP, total channels = 2 b44.c:v0.9 (Jul 14, 2003) PCI: Found IRQ 11 for device 02:00.0 PCI: Sharing IRQ 11 with 00:1d.2 PCI: Sharing IRQ 11 with 00:1f.1 divert: allocating divert_blk for eth0 eth0: Broadcom 4400 10/100BaseT Ethernet 00:0b:db:95:56:22 divert: freeing divert_blk for eth0 b44.c:v0.9 (Jul 14, 2003) PCI: Found IRQ 11 for device 02:00.0 PCI: Sharing IRQ 11 with 00:1d.2 PCI: Sharing IRQ 11 with 00:1f.1 divert: allocating divert_blk for eth0 eth0: Broadcom 4400 10/100BaseT Ethernet 00:0b:db:95:56:22 b44: eth0: Link is down. usb-uhci.c: interrupt, status 2, frame# 1366 usb_control/bulk_msg: timeout firmware version >= 1.9.3.e --> using software timer initial settings update on iface activation. get_mask 0x00000000, set_mask 0x00000f7f Updating WEP key settings Updating transmit power: 20 dBm changing radio power level to 20 dBm (0x3f) Updating antenna value: 0x8F Updating energy detect threshold: 112 Updating Channel Clear Assessment value: 0x0D Updating: enable Tx Updating: enable Rx Updating regulatory domain: 0x10 Updating channel: 11 get_mask 0x00000000, set_mask 0x00000000 - after update get_mask 0x00000000, set_mask 0x00000801 Updating WEP key settings get_mask 0x00000000, set_mask 0x00000000 - after update acx100_process_probe_response: found and registered station 0: ESSID "family" on channel 11, BSSID 00 0D 88 8D 90 A9 (Access Point, 22Mbps), SIR 104, SNR 0. get_mask 0x00000000, set_mask 0x00000400 get_mask 0x00000000, set_mask 0x00000000 - after update acx100_process_probe_response: found and registered station 0: ESSID "family" on channel 11, BSSID 00 40 05 26 B9 36 (Access Point, 22Mbps), SIR 160, SNR 0. acx100_process_probe_response: found and registered station 1: ESSID "family" on channel 11, BSSID 00 0D 88 8D 90 A9 (Access Point, 22Mbps), SIR 90, SNR 0. firmware version >= 1.9.3.e --> using software timer initial settings update on iface activation. get_mask 0x00000000, set_mask 0x0000037f Updating WEP key settings Updating transmit power: 20 dBm changing radio power level to 20 dBm (0x3f) Updating antenna value: 0x8F Updating energy detect threshold: 112 Updating Channel Clear Assessment value: 0x0D Updating: enable Tx Updating: enable Rx Updating regulatory domain: 0x10 Updating channel: 11 get_mask 0x00000000, set_mask 0x00000000 - after update firmware version >= 1.9.3.e --> using software timer initial settings update on iface activation. get_mask 0x00000000, set_mask 0x0000077f Updating WEP key settings Updating transmit power: 20 dBm changing radio power level to 20 dBm (0x3f) Updating antenna value: 0x8F Updating energy detect threshold: 112 Updating Channel Clear Assessment value: 0x0D Updating: enable Tx Updating: enable Rx Updating regulatory domain: 0x10 Updating channel: 11 get_mask 0x00000000, set_mask 0x00000000 - after update firmware version >= 1.9.3.e --> using software timer initial settings update on iface activation. get_mask 0x00000000, set_mask 0x0000077f Updating WEP key settings Updating transmit power: 20 dBm changing radio power level to 20 dBm (0x3f) Updating antenna value: 0x8F Updating energy detect threshold: 112 Updating Channel Clear Assessment value: 0x0D Updating: enable Tx Updating: enable Rx Updating regulatory domain: 0x10 Updating channel: 11 get_mask 0x00000000, set_mask 0x00000000 - after update firmware version >= 1.9.3.e --> using software timer initial settings update on iface activation. get_mask 0x00000000, set_mask 0x00000f7f Updating WEP key settings Updating transmit power: 20 dBm changing radio power level to 20 dBm (0x3f) Updating antenna value: 0x8F Updating energy detect threshold: 112 Updating Channel Clear Assessment value: 0x0D Updating: enable Tx Updating: enable Rx Updating regulatory domain: 0x10 Updating channel: 11 get_mask 0x00000000, set_mask 0x00000000 - after update ---------------------------------------------------------------------- Comment By: Ivor Hewitt (ihewitt) Date: 2003-12-01 15:18 Message: Logged In: YES user_id=780113 Can you increase your debug flags to at least debug=0x03 and post the log again. Thanks. ---------------------------------------------------------------------- Comment By: Rafael Fernández (rusty0412) Date: 2003-12-01 14:41 Message: Logged In: YES user_id=673325 Yes, it's a D-Link :/. It works with Windows, currently I am using driverloader trial because it works very well with the DWL-650+. When you have a new working version e-mail me, I don't wanna buy the driverloader. ---------------------------------------------------------------------- Comment By: Andreas Mohr (andim2) Date: 2003-12-01 09:14 Message: Logged In: YES user_id=132674 Oh no, not another DLink card with some memory issues. This card works in Windows, right? (we've had a similar case some months ago where there was some slight memory corruption, but the card worked fine in Windows). Since you're the 2nd or 3rd (depending on who was faster - I don't know) person to report firmware upload trouble with 520+ and 650+ cards and it actually seems to work on Windows, we definitely ought to try some more to fix it. I'm going to add some more firmware upload debugging in the next version. Hopefully we'll be able to debug it further. Thanks for the report! ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=543745&aid=850584&group_id=75380 |