From: Tomas G. <tom...@ya...> - 2010-01-15 17:20:59
|
Hi, > > Hola, sounds good - interesting ;)! Thanks for the feedback. > > So just for my info, some more questions, if you don't mind: > > - Which card is it actually exactly ? Its labeled as a Ovislink WL-8000 PCI > - With which Firmware version is it running (in the logs or > /proc/driver/acx.../acx_debug) ? tiacx111c16 > - Did the firmware load ok from the first time, or did you had to reload ? My computer loads the module automaticly, and since it connects when I boot up, I assume it is working. If you means the very first time, then maybe I had to reload, but it might just be me doing something I shouldn't. > - How long was the interface up during your tests (approx.) ? Several hours, I use it as the driver for my wireless connection for my desktop. Record might 6-8 hours with the connection still working fine at shutdown, though it wasen't in use all the time. > - Do you have an idea on the throughput you could achieve (like a > download) ? That is hard to say... I think the max speed of a download was something like 700Kb/s, while the out going connection should be able to handle about 1300Kb/s. I'm not sure the driver is to blaim though, it might be the wifi signal passing through a brick wall... I hope the info is usefull :) Cheers, Tomas > > I'm busy syncing up the mem.c support for the hx4700 - and also test it > a bit of course. Then I thought to look into usb.c, where we managed to > find a test device ;). > > Cheers, Oliver > > > On 01/15/2010 11:07 AM, Tomas Groth wrote: > > Hi > > > > Just wanted to let you know that your new version of acx-mac80211 > > works very good with my TNETW1130(ACX111). I've tested both WEP and > > WPA-PSK, and so far I haven't had any problems with crashes or loss > > of connection. > > > > Keep up the good work :) > > > > Cheers, Tomas > > > > |