From: Stephan B. <ste...@we...> - 2002-04-05 22:07:44
|
Hi Dominik, Sean, List! I experience the same problem with the fan controlling as Sean mentioned, even with acpi_processor and acpi_thermal loaded! Stephan On Fri, 5 Apr 2002 22:35:40 +0200, Sean Bergmann said: > Hello, Dominik. > > I just tried echo -n 3 and echo -n 0 to /proc/acpi/fan/FAN/state. > 3 just lowers the fans speed a bit, so its less noisy then. > 0 works fine and the fan becomes its default speed and noisy but theres no way to turn it off completly. (I haven't loaded acpi_processor and acpi_thermal, maybe it has something to do with it?) > > Sean Bergmann > se...@az... > http://sean.azeroth.org > > On Fri, 5 Apr 2002 21:17:44 +0200 > Dominik Brodowski <de...@br...> wrote: > > > Hi Stephan, > > > > > - Thermal has no effect on the fan now (well ok, this did not work > > > correctly with the old Patch) > > ... > > > 2) can i switch on/off the fan manually now? (eg. from a program which > > > checks temperature) > > > can i change the speed of the fan? > > > or does it work automatically from thermal-zone > > Well, it should work automatically. Is the fan exposed in the /proc/acpi > > tree, e.g. is there a directory /proc/acpi/fan/.../ ? Then you can switch it > > on/off manually, "echo -n 3 > /proc/acpi/fan/.../state" turns it off, and > > "echo -n 0 >" turns it on. > > > > > 3) cpu throttling means, slowering the cpu? When is this done, can i do > > > this manually (or should i)? > > Yes, throttling means slowing the CPU down. It's done automatically (or at > > least it should be done) when the system gets dangerously hot. You can turn > > it on manually, e.g. by setting a limit ("echo -n 0:x > > > /proc/acpi/processor/.../limit" with x being the throttling state you want) > > when you want to prolong the battery power-supply. > > > > Dominik > > > > _______________________________________________ > > Acpi-devel mailing list > > Acp...@li... > > https://lists.sourceforge.net/lists/listinfo/acpi-devel > |