RE: [ACPI] ACPI on hp nx6125 doesn't update battery state

[Yu, L. <lum...@in...>]

Please try  boot option: ec_burst=3D1.

Thanks
Luming=20

>-----Original Message-----
>From: acp...@li...=20
>[mailto:acp...@li...] On Behalf Of=20
>Carsten Tschense
>Sent: 2005=C4=EA11=D4=C219=C8=D5 6:22
>To: acp...@li...
>Subject: [ACPI] ACPI on hp nx6125 doesn't update battery state
>
>Hi,
>I bought a HP Compaq nx6125 2 days ago...
>After booting the information in /proc/acpi/battery/C175/state update
>regulary, but after a while they don't. I don't see any errors in
>dmesg, /var/log/messages or /var/log/acpid.
>Well, now the strange solution:
>cat /proc/acpi/thermal_zone/TZ1/temperature
>That's the thermal zone of the cpu. After doing this, the fan starts
>blowing for a while, the cpu usage increases to 100% for about=20
>2 seconds
>(may vary), the systems repeats very slow.
>Now the battery state updates, the system runs as normal. If you do a
>cat /proc/acpi/thermal_zone/TZ1/temperature now, nothing happens, after
>circa 5 minutes the same happens again.
>The temperature looks correct all the time. viewing the temperature of
>another thermal zone doesn't help...
>
>That's a bit strange, isn't it? ;)
>I hope you can help me... :) should I provide some debugging
>information?
>
>I'm running a 2.6.14 with gentoos patchset r2.
>
>Bye,
>Carsten
>
>
>
>-------------------------------------------------------
>This SF.Net email is sponsored by the JBoss Inc.  Get Certified Today
>Register for a JBoss Training Course.  Free Certification Exam
>for All Training Attendees Through End of 2005. For more info visit:
>http://ads.osdn.com/?ad_id=3D7628&alloc_id=3D16845&op=3Dclick
>_______________________________________________
>Acpi-devel mailing list
>Acp...@li...
>https://lists.sourceforge.net/lists/listinfo/acpi-devel
>