From: Bruno D. <du...@po...> - 2004-03-26 11:42:06
|
On Fri, Mar 26, 2004 at 03:25:26AM -0500, asu wrote: > Compiling the decompiled DSDT gives me two errors. One error was that > it required ByteAcc access which I fixed easily. The other error is: > > dsdt.dsl 16: Return (DCST) > Error 1022 - Object does not exist ^ (DCST) > > > The region of code it corresponds to is: > > DefinitionBlock ("DSDT.aml", "DSDT", 1, "SONY", "B0", 537002772) > { > Scope (_PR) > { > Processor (CPU0, 0x00, 0x00001010, 0x06) {} > Scope (\_PR.CPU0) > { > Method (_CST, 0, NotSerialized) > { > Return (DCST) > } > } > > > Changing DCST to _CST and compiling it gives me segmentation fault > while compiling. Realizing that it is dangerous, I tried various > things like DSDT, \_CST, etc. Changing it to 0x0 did not give me any > errors or warnings. Then I changed it to 0x033 which also did not give > me any error. So, I think changing it to 0x0 or 0x033 is incorrect. > > I am using iasl-linux-20030918 to compile my dsl file. > There is good chance that your system do have a table called SSDT, which contains a DCST package. Try something like sudo ./acpidmp/acpidmp | grep SSDT to see if I'm correct. Then ./acpidmp/acpidmp SSDT > ssdt hd ssdt will dump the SSDT. Look then if something like DCST do exist. In that case, just making something like: Method (_CST, 0, NotSerialized) { External(DCST) Return (DCST) } should be ok. If that is not the case, I'm afraid that I need the full dump from acpidmp (no just the DSDT) to look. For this: wget http://developer.intel.com/technology/iapc/acpi/downloads/pmtools-20010730.tar.gz tar xzvfp pmtools-20010730.tar.gz cd pmtools-20010730/acpidmp make sudo ./acpidmp > acpidmp.out gzip acpidmp.out.gz -- Bruno Ducrot -- Which is worse: ignorance or apathy? -- Don't know. Don't care. |