From: Ow M. H. <ow....@wd...> - 2004-03-02 09:58:19
|
> -----Original Message----- > From: Ow Mun Heng=20 > Sent: Monday, March 01, 2004 11:42 AM > To: Acpi-List (E-mail) > Subject: [ACPI] Success : S4 Suspend to Disk on D600 >=20 >=20 > Hi All, >=20 > RH9 + D600 + 2.6.3 kernel (acpi-20040211 patch + laptop mode) > suspend is compiled into the kernel > tg3/sound/usb as modules >=20 > I just want to report success with this configuration. > To suspend, I need to 1st, remove tg3 (ethernet) modules. > Then I blank the display (xset, though it's not really good since > we go back to console and ACPI spits out messages) > USB is dead after resuming.. but doing a rmmod uhci_hcd and then > modprobing it resurrected the usb. >=20 >=20 > Suspend is initiated using echo 4 > /proc/acpi/sleep and using=20 > the Fn-Suspend key passing to acpid events. Kinda long to=20 > write 500+Mb=20 > but.. oh what the heck. it's Good) >=20 >=20 > I've tried S1 and S3..no Dice. The suspend works ok.. but=20 > on powering on.. hard disk spins up.. no Console/X11. > (I guess this is a known issue) >=20 > I've yet to try removing sound and usb modules from the kernel. > More experimenting needed to see if S1 and S3 works. >=20 >=20 > PS : S3/S1 is useful only because it resumes Fast right? but still > draws power. hmm.. might not be so useful for me. :) Few more things.. USB will work okay once I get the control script to rmmod and modprobe them back in. However, I just found out that Video will not work. Eg: Playing any AVI/MOV etc files. Sound will be Ok but no picture. Xine/Mplayer is=20 the same.=20 running Xine from the command line I see that it can't load any of the video drivers. eg: failed to load video output plugins aadxr3=20 dxr3 xv /dev/em8300-0 It'll work fine once I perform proper reboot. Any Ideas? |